Siemens 6ES7138-4DF00-0AB0 ET 200S 1SI RS232/RS422/RS485 Serial Interface
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use an ET 200S station and the appropriate terminal-module arrangement for the serial interface.
- Match baud rate, data bits, parity and stop bits at both ends of the serial link.
- Observe the electrical-interface pin assignment and the 15 m RS232 or 1,200 m RS485 cable limit.
- Allow for the seven-byte transmit and receive transfer capacity per PLC cycle.
6ES7138-4DF00-0AB0 ET 200S 1SI RS232/RS422/RS485 Serial Interface
A 15 mm single-channel serial interface supporting ASCII and 3964R communication up to 19,200 bit/s.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7138-4DF00-0AB0 |
| Product Type | Serial interface module |
| Core Function | Exchanging serial device data |
| Application | Point-to-point equipment integration |
Connect serial equipment
One configurable interface supports RS232, RS422 or RS485 wiring.
Choose the protocol
ASCII supports full-duplex operation, while 3964R uses half-duplex communication.
Exchange CPU messages
P_SEND and P_RCV handle message data with a maximum length of 2,700 bytes.
Product Overview
6ES7138-4DF00-0AB0 links serial equipment to an ET 200S station through a configurable point-to-point interface.
The interface supports RS232, RS422 and RS485 electrical arrangements, with P_SEND and P_RCV standard function blocks handling CPU data exchange.
Key Functions
Connect serial equipment
One configurable interface supports RS232, RS422 or RS485 wiring.
Choose the protocol
ASCII supports full-duplex operation, while 3964R uses half-duplex communication.
Exchange CPU messages
P_SEND and P_RCV handle message data with a maximum length of 2,700 bytes.
Official Specifications
| Interface Quantity | 1 serial channel |
|---|---|
| Electrical Interface Standards | RS232, RS422 and RS485 |
| Communication Protocols | ASCII and 3964R |
| Selectable Transfer Rates | 110, 300, 600, 1,200, 2,400, 4,800, 9,600 and 19,200 bit/s |
| Character Length | 7 or 8 data bits |
| Start and Stop Bits | 1 start bit; 1 or 2 stop bits |
| Parity Options | None, odd, even or any |
| Maximum Message Length | 2,700 bytes using P_SEND and P_RCV |
| Transfer per PLC Cycle | 7 transmit bytes and 7 receive bytes |
| Maximum Cable Length | 15 m for RS232; 1,200 m for RS485 |
| Load Supply | 24 V DC |
| Backplane Current | Maximum 10 mA at 3.3 V |
| Typical Power Loss | 1.2 W |
| Local Indicators | RxD, TxD and SF LEDs |
| Operating Temperature | 0 to +60 °C |
| Dimensions (W × H × D) | 15 × 81 × 52 mm |
| Approximate Weight | 50 g |
Frequently Asked Questions
Can I connect an RS485 device to 6ES7138-4DF00-0AB0?
The configurable serial interface supports RS485 as well as RS232 and RS422.
Which CPU blocks exchange data with 6ES7138-4DF00-0AB0?
Use the P_SEND and P_RCV standard function blocks for sending and receiving message data.
How long can a single message be with 6ES7138-4DF00-0AB0?
The maximum message length is 2,700 bytes.
Can 6ES7138-4DF00-0AB0 communicate at 38,400 bit/s?
The highest selectable transfer rate is 19,200 bit/s.
How far can an RS232 cable run from 6ES7138-4DF00-0AB0?
The maximum RS232 cable length is 15 m.
What duplex mode does 6ES7138-4DF00-0AB0 use with 3964R?
The 3964R protocol operates in half-duplex mode.
Which indicators help me diagnose data exchange on 6ES7138-4DF00-0AB0?
The RxD and TxD LEDs indicate data traffic and the SF LED indicates a fault.