Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7133 1bl11 0xb0 simatic et200l sc mixed digital io block-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC DP 6ES7133-1BL11-0XB0 ET 200L-SC Mixed Digital I/O Block

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC ET 200L-SC

6ES7133-1BL11-0XB0 ET 200L-SC Mixed Digital I/O Electronic Block

Siemens 6ES7133-1BL11-0XB0 is a SIMATIC DP electronic block for ET 200L-SC stations, combining 16 digital inputs with 16 electronically protected digital outputs for 24 V DC field circuits.

At a Glance

Brand Siemens
Model 6ES7133-1BL11-0XB0
Product Type Mixed Digital Input and Output Electronic Block
Core Function Provides compact field-level signal acquisition and actuator control
Application or Compatible Series Legacy SIMATIC ET 200L-SC PROFIBUS DP distributed I/O stations

Exact Identification

Match the complete article number and the ET 200L-SC mixed-I/O designation before replacing an installed block.

Electrical Load Check

Confirm the input thresholds, output load type, channel current and aggregate-current derating for the installed orientation.

Station Integration

Verify the TB 32L terminal block, PROFIBUS configuration and any connected SIMATIC Smart Connect expansion.

Product Overview

Siemens 6ES7133-1BL11-0XB0 is a SIMATIC DP electronic block for ET 200L-SC stations, combining 16 digital inputs with 16 electronically protected digital outputs for 24 V DC field circuits.

Sixteen 24 V DC inputs acquire field states from switches, proximity sensors and other compatible signaling devices. Sixteen 24 V DC outputs switch compatible field loads with electronic short-circuit protection. Bus, input, output and electronics-supply indicators support wiring checks and fault localization.

Ordering focus: confirm the complete article number, TB 32L terminal block, 24 V DC field supply, input and output allocation, load-current derating, PROFIBUS settings and Smart Connect expansion arrangement.

Key Functions

Discrete Signal Acquisition

Sixteen 24 V DC inputs acquire field states from switches, proximity sensors and other compatible signaling devices.

Protected Load Switching

Sixteen 24 V DC outputs switch compatible field loads with electronic short-circuit protection.

Local Commissioning Feedback

Bus, input, output and electronics-supply indicators support wiring checks and fault localization.

Official Specifications

Supply and Polarity Protection 24 V DC rated supply with reverse-polarity protection
Voltage-Failure Buffer Time 20 ms
Maximum Electronics-Supply Current 180 mA from L+
No-Load Current per Load Group 50 mA maximum from L1+ or L2+ / L3+
Typical Power Loss 5 W
Required Terminal Block TB 32L
Digital Input Channels 16
Digital Input Thresholds Signal 0: -30 to +5 V; signal 1: 13 to 30 V
Typical Input Current at Signal 1 5 mA
Input Delay 2 to 4.5 ms
Digital Output Channels 16
Output Short-Circuit Protection Electronic
Minimum Output Voltage at Signal 1 Ua - 3 V
Output Current 0.5 A maximum at signal 1 from 0 to 60 deg C; 1 mA maximum residual current at signal 0
Maximum Switching Frequency 100 Hz resistive, 0.5 Hz inductive and 8 Hz lamp load
Aggregate Output Current Horizontal: 4 A to 30 deg C, 3 A to 40 deg C and 2 A to 60 deg C; other positions: 2 A to 40 deg C
Maximum Field Cable Length 1000 m shielded or 600 m unshielded
PROFIBUS DP Performance 1.5 Mbit/s maximum with SYNC and FREEZE capability
Status Indication Red bus-fault LED plus green input, output and 24 V supply indicators
Dimensions and Weight 145 x 60 x 60.5 mm; approximately 130 g

Frequently Asked Questions

Which terminal block is required for 6ES7133-1BL11-0XB0?

Use a TB 32L terminal block and confirm its connection style against the installed station.

What digital input levels are recognized by 6ES7133-1BL11-0XB0?

A logic 0 spans -30 to +5 V, while a logic 1 spans 13 to 30 V.

Can 6ES7133-1BL11-0XB0 drive a 0.5 A load on each output?

Each active output is rated up to 0.5 A, but the module-level aggregate-current limits must also be observed.

How should output current be derated for 6ES7133-1BL11-0XB0?

Horizontal installation permits 4 A to 30 deg C, 3 A to 40 deg C and 2 A to 60 deg C, while other positions permit 2 A to 40 deg C.

Does 6ES7133-1BL11-0XB0 protect its outputs against short circuits?

The digital outputs use electronic short-circuit protection.

What PROFIBUS DP rate can 6ES7133-1BL11-0XB0 use?

The maximum bus transmission rate is 1.5 Mbit/s.

What should be recorded before replacing 6ES7133-1BL11-0XB0?

Record the terminal assignment, load-group wiring, field supply, PROFIBUS address and current hardware configuration.

Compatibility & Ordering Notes

Before ordering 6ES7133-1BL11-0XB0: confirm the complete article number, TB 32L terminal block, 24 V DC field supply, input and output allocation, load-current derating, PROFIBUS settings and Smart Connect expansion arrangement.

Compatibility Checklist

  • Confirm that the installed station is a SIMATIC ET 200L-SC distributed I/O node.
  • Match the existing TB 32L terminal-block connection style.
  • Verify the 16-input and 16-output field allocation before moving conductors.
  • Confirm the 24 V DC electronics supply and every load-group supply.
  • Preserve the PROFIBUS DP address and project configuration.
  • Record any SIMATIC Smart Connect digital or analog expansion.
  • Calculate output loading with the applicable temperature and mounting-position derating.
Hot Selling Models
LADN22 038403
985324
E70188 M8309-03
7000-40321-6530200
7000-40041-6551000
NBB10-30GM50-E0-V1
PKZM0-1
6ES7307-1BA00-0AA0
10317892-325
TE5-04 068B2092
3SB3000-4HD11
3RV2011-4AA10 3RV2901-2E
535120
CAB-434 Rev. A RS232
3RH1140-2BB40 3RT1916-1BB00

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.