Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7132 6bd20 0ba0 et 200sp dq 4x24vdc 2a st digital output module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7132-6BD20-0BA0 ET 200SP DQ 4x24VDC/2A ST Digital Output Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200SP

6ES7132-6BD20-0BA0 ET 200SP DQ 4x24VDC/2A ST Digital Output Module

A four-channel, current-sourcing 24 V DC output module with 2 A per channel, module diagnostics and BaseUnit type A0 compatibility.

At a Glance

Brand Siemens
Model 6ES7132-6BD20-0BA0
Product Type Standard digital output module
Core Function Switches DC actuator signals
Application ET 200SP distributed I/O stations

Four sourcing channels

PNP outputs switch 24 V DC loads at up to 2 A per channel.

Module diagnostics

Supply, short-circuit and wire-break diagnostics assist commissioning.

A0 BaseUnit

The module uses a type A0 BaseUnit and the CC02 identification color code.

Product Overview

6ES7132-6BD20-0BA0 provides four current-sourcing digital outputs for 24 V DC actuators in a SIMATIC ET 200SP station.

The standard module supports diagnostic alarms and optional quality information, while its permitted total output current depends on the installation orientation and ambient temperature.

Ordering focus: Choose the type A0 BaseUnit for the actuator wiring and size the total module current for the installation orientation and temperature.
Key Functions

PNP actuator switching

Four outputs provide up to 2 A per channel for DC loads, with electronic short-circuit protection and a maximum resistive-load switching frequency of 100 Hz.

Diagnostics and quality information

Module diagnostics cover load-voltage monitoring, short circuit and wire break, and an enabled QI input byte reports the validity of the output channels.

Flexible field-wiring arrangements

Type A0 BaseUnits support one- and two-wire actuators, while AUX terminals or potential distributors provide the additional connections needed for three- and four-wire arrangements.

Official Specifications
Digital Output Arrangement 4 PNP current-sourcing channels, 24 V DC, 2 A per channel
Permissible Supply Voltage 19.2–28.8 V DC
No-load Current Consumption 60 mA maximum
Typical Power Loss 1 W
Maximum Module Output Current 8 A, subject to mounting position and temperature
Horizontal-installation Current Limits 8 A at 40 °C; 6 A at 50 °C; 4 A at 60 °C
Vertical-installation Current Limits 8 A at 30 °C; 6 A at 40 °C; 4 A at 50 °C
Electronic Short-circuit Threshold 2.8–5.2 A typical
Maximum Lamp Load 10 W per output
Load Resistance 12–3,400 Ω
Maximum Off-state Residual Current 0.1 mA
Resistive-load Output Delays 50 µs maximum for 0→1; 100 µs maximum for 1→0
Maximum Switching Frequencies 100 Hz resistive; 2 Hz inductive; 10 Hz lamp load
Maximum Output Cable Lengths 1,000 m shielded; 600 m unshielded
Output Address Space 1 byte, plus 1 input byte when QI is enabled
Isolation Test Voltage 707 V DC type test, channels to backplane bus
Module Indicators Green PWR and channel LEDs; green/red DIAG LED
Operating Temperature Limits Horizontal: −30–60 °C; vertical: −30–50 °C; operation below 0 °C from FS08
Dimensions (W × H × D) 15 × 73 × 58 mm
Approximate Weight 30 g
Frequently Asked Questions

Which BaseUnit should I select for 6ES7132-6BD20-0BA0?

Use a type A0 BaseUnit and match the actuator wiring arrangement to the required AUX terminals or potential distributor.

Does 6ES7132-6BD20-0BA0 need extra terminals for three-wire actuators?

Three-wire wiring requires a type A0 BaseUnit with AUX terminals or an appropriate potential distributor module.

What does a QI value of zero indicate for 6ES7132-6BD20-0BA0?

A zero quality-status bit indicates a deactivated channel or a module fault, and a channel fault sets the quality status of all channels to zero.

Why is the PWR LED on 6ES7132-6BD20-0BA0 off?

An unlit PWR LED indicates that the load supply voltage L+ is absent.

Can I parallel two outputs of 6ES7132-6BD20-0BA0 to increase the load current?

Parallel outputs must not be used to increase the current rating.

Can 6ES7132-6BD20-0BA0 deliver the full 8 A at 60 °C in horizontal mounting?

The permitted total module current falls to 4 A at 60 °C in horizontal mounting.

Does 6ES7132-6BD20-0BA0 operate as a PWM output module?

The standard module provides digital switching outputs and does not support PWM mode.

Compatibility & Ordering Notes
Before ordering 6ES7132-6BD20-0BA0: Pair the module with a type A0 BaseUnit and the correct potential distribution, then account for output-current derating and the selected QI address allocation.

Compatibility Checklist for 6ES7132-6BD20-0BA0

  • Select BaseUnit type A0 and CC02 color identification for this module.
  • Provide AUX connections or potential distributors for the required three- or four-wire actuators.
  • Keep each output within 2 A and observe the total-current limits for temperature and orientation.
  • Allocate the additional input byte when quality information is enabled.
  • Use module-level diagnostics for wire-break and short-circuit reporting; channel diagnostic LEDs are not provided.
Hot Selling Models
Z2S 6-3-64 / R900347497
SH540E
DA2/100 C 3 842 525 734
60.12.9.024.2070
2668760000
Leoni 1753770 LEHC 002054
Leoni 1753802 LEHC 002054
Leoni 1753803 LEHC 002054
F72G-3GN-QT3
BWU2270
6ES7390-1AJ30-0AA0
ADVUP-25-A-5Z1-10Z2
3RT1035-3BB40 3RH1921-2CA10 3RT1936-1ER02
WAGO 285-635
DSNU3250PPVA

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.