Siemens 6EP3310-6SB00-0AY0 LOGO!Power 5 V DC 3 A Power Supply
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the connected equipment to the adjustable 4.6–5.4 V output range.
- Keep the continuous output within 3 A and apply 2%/K derating above 55 °C.
- Use the specified AC or DC input range and suitable feeder protection.
- Provide at least 20 mm ventilation space above and below the housing.
- Use the 50 mV-to-3 A measuring point to assess the actual load current.
6EP3310-6SB00-0AY0 LOGO!Power 5 V DC 3 A Power Supply
A 15 W supply with 5 V DC at 3 A output, a wide AC/DC input range and a measuring point for the actual output current.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6EP3310-6SB00-0AY0 |
| Product Type | Compact stabilized power supply |
| Core Function | Provides regulated low-voltage DC power |
| Application | Control panels and compact automation equipment |
5 V output
The 3 A output can be adjusted from 4.6 V to 5.4 V DC.
AC or DC input
The wide-range input accepts 85–264 V AC or 110–300 V DC.
Current measurement
An accessible measuring point provides 50 mV at 3 A output current.
Product Overview
6EP3310-6SB00-0AY0 provides a regulated 5 V DC output at up to 3 A from a wide-range single-phase AC or DC input.
The 36 mm wide enclosure supports DIN-rail or direct wall mounting, and the output-current measuring point allows the connected load to be assessed without opening the output circuit.
Key Functions
Wide-range AC/DC conversion
The input accepts 85–264 V AC or 110–300 V DC, while the output potentiometer adjusts the nominal 5 V output across the 4.6–5.4 V range.
Temporary overload for load startup
The supply delivers a typical 150% overload for 200 ms to support loads with higher startup demand, then operates within the continuous 3 A rating.
Load measurement and compact mounting
A measuring point provides a 50 mV indication at 3 A, and the housing can be mounted on a 35 mm DIN rail or directly on a wall with the required cooling space.
Official Specifications
| Permissible Input Voltages | 85–264 V AC or 110–300 V DC |
|---|---|
| Rated AC Input and Frequency | 100–240 V AC; 47–63 Hz |
| Rated Input Current | 0.36 A at 120 V AC; 0.22 A at 230 V AC |
| Maximum Inrush Current | 26 A at 25 °C |
| Rated DC Output | 5 V DC, 3 A; 15 W typical |
| Output Voltage Adjustment | 4.6–5.4 V DC |
| Residual Ripple | 30 mV typical; 100 mV maximum |
| Output Voltage Peaks | 50 mV typical; 100 mV maximum |
| Temporary Overload Capability | 150% of rated current for 200 ms, typical |
| Mains Buffering Time | At least 40 ms at 187 V input and rated output current |
| Current-measurement Point | 50 mV corresponds to 3 A |
| Efficiency and Rated-load Power Loss | 76%; 4.7 W typical |
| Maximum No-load Power Loss | 0.3 W |
| Typical Short-circuit Current | 3.8 A, constant-current characteristic |
| Startup Behavior | Soft start without output-voltage overshoot |
| Electrical and Enclosure Protection | Class II, no protective conductor; IP20 |
| Operating Temperature | −25–70 °C; 2%/K output-current derating above 55 °C |
| Storage and Transport Temperature | −40–85 °C |
| Dimensions (W × H × D) | 36 × 90 × 53 mm |
| Net Weight | 0.12 kg |
Frequently Asked Questions
Can 6EP3310-6SB00-0AY0 be supplied from a DC source?
The input accepts 110–300 V DC as well as 85–264 V AC.
Can I trim 6EP3310-6SB00-0AY0 to a load voltage slightly above 5 V?
The output potentiometer permits adjustment from 4.6 V to 5.4 V DC.
How can I measure the load current of 6EP3310-6SB00-0AY0 without disconnecting the load?
Use the output-current measuring point, where 50 mV corresponds to 3 A.
Can 6EP3310-6SB00-0AY0 support a brief startup demand above its 3 A rating?
The supply provides a typical 150% overload for 200 ms for short startup demands.
How much output current must I derate on 6EP3310-6SB00-0AY0 above 55 °C?
Reduce the output-current rating by 2% per kelvin between 55 °C and 70 °C.
Does 6EP3310-6SB00-0AY0 require a protective-earth conductor?
The supply is protection class II and does not require a protective conductor.
Which mounting arrangements can I use for 6EP3310-6SB00-0AY0?
The supply supports 35 mm DIN-rail mounting or direct wall mounting with at least 20 mm clearance above and below.