Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1961 3ba21 sitop pse202u 24 v dc 40 a redundancy module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1961-3BA21 SITOP PSE202U 24 V DC 40 A Redundancy Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SITOP PSE202U

6EP1961-3BA21 SITOP PSE202U 24 V DC 40 A Redundancy Module

A 24 V DC decoupling module for two power supplies rated up to 20 A each, with a 40 A aggregate output path and adjustable input-voltage monitoring.

At a Glance

Brand Siemens
Model 6EP1961-3BA21
Product Type Redundancy module
Core Function Decouples two DC power supplies
Application Redundant 24 V DC industrial power systems

Two decoupled inputs

The module combines two SITOP power supplies with a maximum of 20 A per supply.

Adjustable voltage monitoring

The signal threshold can be set between 20 and 25 V.

Remote status contact

An isolated changeover relay reports whether both input voltages exceed the set threshold.

Product Overview

6EP1961-3BA21 decouples two SITOP DC power supplies and feeds their common load through a redundancy output path.

The module handles up to 40 A of aggregate output current from supplies rated up to 20 A each, with approximately 0.5 V of voltage drop; the available load after a supply failure remains limited by the surviving supply.

Ordering focus: Match each supply to the maximum 20 A input requirement, size the redundant load for the surviving supply, and set a monitoring threshold suitable for the 24 V system.
Key Functions

Decouple the two supply outputs

The redundancy path isolates the two connected supply outputs from each other while feeding a common DC load.

Monitor both input voltages

A green indication and an OK relay condition require both input voltages to exceed the adjustable threshold, while a red indication identifies an input below it.

Provide potential-free status signaling

The isolated changeover contact makes the supply-status signal available to an external monitoring circuit.

Official Specifications
DC input voltage range 24–28.8 V
Maximum connected supply current 20 A per power supply
Aggregate output current 40 A maximum
Output voltage relationship Input voltage minus approximately 0.5 V
Input-voltage monitoring threshold Adjustable from 20 to 25 V
Signaling contact rating Isolated changeover contact, 8 A at 240 V AC or 24 V DC
Efficiency 96.6%
Power dissipation 34 W typical at rated load; 1.5 W maximum at no load
Input-to-output galvanic isolation None
Enclosure protection IP20
Operating temperature −25 to +60 °C with natural convection
High-temperature derating 3% per kelvin from +60 to +70 °C
Storage and transport temperature −40 to +85 °C
Relative humidity 5–95%, non-condensing; climatic class 3K3
Power and ground terminals Screw terminals for 0.33–10 mm² solid or finely stranded conductors
Relay-contact terminals Three screw terminals for 0.5–2.5 mm² solid or finely stranded conductors
Enclosure dimensions (W × H × D) 70 × 125 × 120 mm
Net weight 0.5 kg
Mounting rail EN 60715, 35 × 7.5 mm or 35 × 15 mm
Installation clearances 50 mm above and below; 0 mm on either side
Frequently Asked Questions

Can two 20 A supplies provide a fully redundant 40 A load through 6EP1961-3BA21?

The redundant load must stay within the capacity of one surviving supply even though the module output path permits 40 A in aggregate.

How much voltage drop should be allowed across 6EP1961-3BA21?

The output voltage is approximately 0.5 V below the input voltage.

What does a red indicator on 6EP1961-3BA21 mean?

At least one input voltage is below the selected monitoring threshold.

Can the input-voltage alarm point of 6EP1961-3BA21 be adjusted?

The threshold can be set from 20 to 25 V.

Does 6EP1961-3BA21 electrically isolate the power output from the inputs?

There is no galvanic isolation between the power inputs and the output.

How much ventilation space is needed above and below 6EP1961-3BA21?

Provide 50 mm clearance above and below the module for the specified installation.

Which contact can be used to monitor 6EP1961-3BA21 remotely?

The isolated changeover relay provides an OK signal when both inputs exceed the selected threshold and is rated at 8 A for 240 V AC or 24 V DC.

Compatibility & Ordering Notes
Before ordering 6EP1961-3BA21: Pair suitable DC supplies rated up to 20 A each, keep the redundant load within one surviving supply rating and provide the specified rail, conductor sizes and ventilation clearances.

Compatibility Checklist for 6EP1961-3BA21

  • Operate from the specified 24–28.8 V DC input range.
  • Allow approximately 0.5 V of voltage drop through the redundancy path.
  • Keep the load within the surviving power supply capacity for redundancy.
  • Set the monitoring threshold between 20 and 25 V for the application.
  • Maintain SELV/ES1 conditions for the relay-contact circuit.
  • Use an insulated screwdriver when adjusting the potentiometer.
  • Observe high-temperature derating above +60 °C and provide 50 mm upper and lower clearances.
Hot Selling Models
X20PS2100 X20HP
6K-PU-RD10-S75
6ES7133-1BL01-0XB0 6ES7193-1CL00-0XA0
WLL160-F420 6 009 990
C-M08M04-04X025PV15.0-ZN-088844
GE ZQV2.5N/4GE
BOS01UM BOS 12M-PA-RF10-S4
35-384-10YD 1023292000
L84M-3GP-EDN
ML17-54/115b/136
A1S38HBEU
3VL9600-4EC30
303/44.1 30 S8 50083118
303/44 S8 50082216
BOS01MN BOS 6K-PU-LK10-S49

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.