Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1336 3ba00 sitop modular 24 v dc 20 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1336-3BA00 SITOP Modular 24 V DC 20 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SITOP modular

6EP1336-3BA00 SITOP Modular 24 V DC 20 A Power Supply

A 480 W SITOP modular supply with selectable 120/230 V AC input, 24 V DC at 20 A output and switchable short-circuit behavior.

At a Glance

Brand Siemens
Model 6EP1336-3BA00
Product Type Stabilized industrial power supply
Core Function Converts mains AC to regulated DC power
Application Industrial control and automation cabinets

Selectable mains range

A wire jumper selects the 120 V or 230 V AC input range.

20 A output

The regulated output is adjustable from 24 V to 28.8 V DC.

Fault behavior selection

Short-circuit operation can use constant-current limiting or latching shutdown.

Product Overview

6EP1336-3BA00 is a SITOP modular stabilized power supply rated at 24 V DC and 20 A, with a typical output power of 480 W.

The input range is selected for the installed 120 V or 230 V AC supply by a wire jumper, while the output potentiometer permits adjustment up to 28.8 V DC for the connected load circuit.

Ordering focus: Select the correct mains jumper range, allow the required ventilation space and choose the overload characteristic to suit the downstream DC circuit.
Key Functions

Regulated DC output for cabinet loads

The 24 V output supplies up to 20 A and can be adjusted between 24 V and 28.8 V, with input-to-output isolation and an LED indication for normal operation.

Switchable response to overload

The supply offers a constant-current short-circuit characteristic of approximately 23 A or latching shutdown, with separate yellow overload and red shutdown indications.

Parallel operation and mains buffering

Two units may be operated in parallel for increased output capacity, and the supply bridges a mains interruption for at least 20 ms at 230 V input and rated load.

Official Specifications
AC Input Ranges 85–132 V or 176–264 V, selected by wire jumper
Line Frequency 47–63 Hz; nominal 50/60 Hz
Rated Input Current 7.7 A at 120 V AC; 3.5 A at 230 V AC
Maximum Inrush Current 60 A at 25 °C
Rated Output 24 V DC, 20 A; 480 W typical
Output Voltage Adjustment 24–28.8 V DC via potentiometer
Residual Ripple 30 mV typical; 100 mV maximum
Output Voltage Peaks 60 mV typical; 200 mV maximum
Mains Buffering Time At least 20 ms at 230 V AC and rated output current
Short-circuit Characteristics Approximately 23 A constant current or latching shutdown
Short-term Short-circuit Boost 60 A typical for 25 ms during operation
Efficiency and Typical Power Loss 89%; 59 W at rated output
Load-step Settling Time 2 ms typical; 5 ms maximum
Enclosure and Electrical Protection IP20; protection class I; isolated SELV output
Operating Temperature 0–70 °C; 3.5%/K output-current derating above 60 °C
Storage and Transport Temperature −40–85 °C
Input Terminals L, N and PE screw terminals for 0.2–4 mm² conductors
Output Terminals Two + and two − screw terminals for 0.5–4 mm² conductors
Dimensions (W × H × D) 160 × 125 × 125 mm
Net Weight 2.2 kg
Official source:Siemens product data sheet
Frequently Asked Questions

Can I connect 6EP1336-3BA00 to either 120 V or 230 V mains without changing a setting?

Select the appropriate input range with the wire jumper before applying the 120 V or 230 V AC supply.

How far can I adjust the DC output of 6EP1336-3BA00?

The output potentiometer adjusts the voltage from 24 V to 28.8 V DC.

Which overload behavior can I select on 6EP1336-3BA00?

Choose either the approximately 23 A constant-current characteristic or latching shutdown.

What do the yellow and red indicators on 6EP1336-3BA00 mean?

The yellow LED indicates overload and the red LED indicates latching shutdown.

Can two units of 6EP1336-3BA00 supply a higher-current load together?

Two power supplies can be connected in parallel for increased output capacity.

How much ventilation clearance is needed around 6EP1336-3BA00?

Leave 50 mm above and below the supply, while adjacent housings may be placed side by side.

Must I reduce the load on 6EP1336-3BA00 above 60 °C?

Reduce the output-current rating by 3.5% per kelvin between 60 °C and 70 °C.

Compatibility & Ordering Notes
Before ordering 6EP1336-3BA00: Match the installed mains range, the continuous DC load and the selected overload behavior, with sufficient cabinet height for the required ventilation clearances.

Compatibility Checklist for 6EP1336-3BA00

  • Set the wire jumper for the 120 V or 230 V input range before energizing.
  • Keep the continuous output within 20 A and apply the specified high-temperature derating.
  • Select constant-current operation or latching shutdown for the downstream circuit.
  • Provide 50 mm clearance above and below the DIN-rail-mounted supply.
  • Use the specified input and output conductor cross-sections and connect PE.
Hot Selling Models
6ES7138-1XL00-0XB0
2-180-10ZPKG 1014406000
EL00050MD341A01
Ni20U-G30-ADZ30X2-B3131
10C1.6X027 Pn250bar
FAZ-C6/4
816-B04-PA-16-602-11 BNS039N
A00480-106-002-3
NZMS4-63
NUST1-D02
NUST1-D02 51375984
1753801 LEHC 002054
16N3006043
Leoni 1501450
RIF-1-RPT-LDP-24DC/2X21

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.