Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1333 2ba01 sitop smart 24 v 5 a pfc power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1333-2BA01 SITOP smart 24 V 5 A PFC Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITOP smart

6EP1333-2BA01 SITOP smart 24 V 5 A PFC Power Supply

SITOP smart 120 W supply with selectable 120/230 V AC input, an adjustable 24 V DC output and a five-ampere rated output.

At a Glance

Brand Siemens
Model 6EP1333-2BA01
Product Type Stabilized DC power supply
Core Function Single-phase AC conversion with power-factor correction
Application Industrial 24 V control circuits

PFC input conversion

The PFC input version supplies a stabilized twenty-four-volt control circuit from the selected AC mains range.

Adjustable output reserve

Output adjustment and a six-ampere operating range up to forty-five degrees Celsius support the connected load.

Load-fault response

Constant-current protection and a short overload interval define the supply response to load faults.

Product Overview

6EP1333-2BA01 provides an isolated, stabilized DC supply for industrial control loads from a selected single-phase AC input range.

The PFC version combines voltage adjustment, short-duration overload capability and constant-current short-circuit behavior in a fifty-millimetre-wide DIN-rail housing.

Ordering focus: Set the correct mains selector position and match the load, temperature, feeder protection and ventilation clearances.
Key Functions

PFC input conversion

The PFC input version supplies a stabilized twenty-four-volt control circuit from the selected AC mains range.

Adjustable output reserve

Output adjustment and a six-ampere operating range up to forty-five degrees Celsius support the connected load.

Load-fault response

Constant-current protection and a short overload interval define the supply response to load faults.

Official Specifications
Input network and selection Single-phase 120/230 V AC, selected by device switch; 85–132 V or 170–264 V; 47–63 Hz
Rated input current 2.1 A at 120 V; 1.15 A at 230 V
Inrush characteristic Maximum 32 A at 25°C; typical duration 3 ms; maximum I²t 0.8 A²s
Rated DC output 24 V; 5 A; 120 W
Output voltage adjustment 22.8–28 V by potentiometer
Extended output-current range 0–6 A; 6 A up to +45°C
Mains buffering Minimum 20 ms at rated load and input 93/187 V
Output ripple and spikes Ripple: 50 mV typical, 150 mV maximum; spikes: 150 mV typical, 240 mV maximum
Startup response Maximum delay 0.1 s; typical voltage rise 50 ms; approximately 4% overshoot
Short overload capability 17 A typical; 100 ms during startup or 200 ms during operation
Current-limit response 6.4–6.6 A; constant-current short-circuit characteristic
Overvoltage protection Output below 33 V
Efficiency and typical loss 87%; 17 W at rated output
Internal fuse T 3.15 A / 250 V; not accessible
Operating ambient 0 to +60°C with natural convection
Storage and transport ambient −40 to +85°C
Protection and insulation IP20; Class I; isolated SELV output
Terminal conductors 0.5–2.5 mm²; one terminal each for L, N and PE, two each for L+ and M
Mounting and ventilation EN 60715 35 × 7.5/15 mm DIN rail; 50 mm clearance above and below
Dimensions and net weight 50 × 125 × 125 mm (W × H × D); 0.5 kg
Frequently Asked Questions

Will 6EP1333-2BA01 automatically select any mains voltage between 85 and 264 V?

The device requires the correct selector-switch position for either the 85–132 V or the 170–264 V input range.

Can 6EP1333-2BA01 supply six amperes continuously in a cool cabinet?

The output range extends to six amperes at ambient temperatures up to forty-five degrees Celsius.

Can I connect two units of 6EP1333-2BA01 in parallel to increase available power?

The supply supports parallel operation of two units for increasing output power.

Can I replace the internal fuse of 6EP1333-2BA01 through an accessible fuse holder?

The internal T 3.15 A fuse is not accessible.

What startup voltage excursion should I allow for loads supplied by 6EP1333-2BA01?

The output voltage can overshoot its set value by approximately four percent during switch-on.

How long can 6EP1333-2BA01 bridge a mains interruption at rated load?

The minimum buffering time is twenty milliseconds at an input of 93 or 187 V.

Which external feeder characteristic is recommended for 6EP1333-2BA01?

The feeder recommendation is a miniature circuit breaker with characteristic C and a rating starting from six amperes.

Compatibility & Ordering Notes
Before ordering 6EP1333-2BA01: Set the correct mains selector position and match the load, temperature, feeder protection and ventilation clearances.

Before installation

  • Set the 120/230 V selector to match the incoming supply before applying power.
  • Size the five-ampere load and any six-ampere operating requirement for the actual cabinet temperature.
  • Provide the specified feeder protection and retain fifty millimetres of free space above and below the housing.
  • Mount on the specified DIN rail and account for isolated Class I wiring and the load’s startup-voltage tolerance.
Hot Selling Models
XPSAC3721
8-PAC
140M-F8E-C32 140M-C-AFA11
LX270W
18.24.36
18.23.12
efector100 IB5131
XPSAC5121
BK4000
SE-1/2 B 9688
ADN-40-15-APA
SFKH0215008 PT1000
RM/8020/MF/60
IZ5026 IZB30.8-BPKG/V2A
B&R 7AF101.7

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.