Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1332 1sh43 logo power 24 v 2 5 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1332-1SH43 LOGO!Power 24 V 2.5 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
LOGO!Power

6EP1332-1SH43 LOGO!Power 24 V 2.5 A Power Supply

60 W LOGO!Power supply with a wide AC/DC input, adjustable 22.2–26.4 V output and 2.5 A nominal current.

At a Glance

Brand Siemens
Model 6EP1332-1SH43
Product Type Stabilized DC power supply
Core Function Conversion of AC or DC input to regulated DC
Application 24 V control and automation loads

Wide-range supply input

The unit accepts single-phase AC or DC input within the stated operating ranges.

Adjustable regulated output

A potentiometer adjusts the nominal 24 V DC output between 22.2 and 26.4 V.

Protected DC load supply

Constant-current short-circuit protection and a green output-OK LED support operation and servicing.

Product Overview

6EP1332-1SH43 supplies regulated, isolated 24 V DC at a nominal current of 2.5 A for control equipment.

The DIN-rail power supply accepts a wide AC or DC input and combines constant-current short-circuit protection, output-voltage indication and natural-convection cooling.

Ordering focus: Size the 24 V load for 2.5 A, apply temperature derating above +55°C and reserve the required top and bottom ventilation spacing.
Key Functions

Wide-range supply input

The unit accepts single-phase AC or DC input within the stated operating ranges.

Adjustable regulated output

A potentiometer adjusts the nominal 24 V DC output between 22.2 and 26.4 V.

Protected DC load supply

Constant-current short-circuit protection and a green output-OK LED support operation and servicing.

Official Specifications
AC input 100–240 V AC nominal; operating range 85–264 V
DC input 110–300 V DC
Input frequency 47–63 Hz
Rated input current 1.22 A at 120 V; 0.66 A at 230 V
Maximum inrush current 46 A at 25°C
Mains buffering At least 40 ms at 187 V input and rated output current
Rated output 24 V DC; 2.5 A; 60 W
Output adjustment 22.2–26.4 V DC via potentiometer
Output current derating 2% per K from +55 to +70°C
Maximum output ripple 200 mV
Maximum output voltage peak 300 mV
Efficiency and loss 88%; 8 W typical at rated output
No-load consumption 1.8 W maximum
Short-circuit characteristic Constant current; 3.3 A typical
Parallel operation Up to 2 units for increased output power
Electrical protection Class II; isolated safety extra-low output voltage
Operating temperature −20 to +70°C with natural convection
Storage and transport temperature −40 to +85°C
Installation IP20; 35 mm DIN rail; 20 mm top and bottom clearance
Housing dimensions and weight 72 × 90 × 52.6 mm (W × H × D); 0.25 kg
Frequently Asked Questions

Can I power 6EP1332-1SH43 from a DC source instead of AC mains?

The supply accepts a DC input between 110 and 300 V.

How far can I adjust the output of 6EP1332-1SH43?

The output potentiometer provides an adjustment range of 22.2–26.4 V DC.

Can 6EP1332-1SH43 deliver its full 2.5 A at +70°C?

The output must be derated by 2% per kelvin above +55°C.

How much vertical clearance must I leave around 6EP1332-1SH43?

Leave 20 mm above and 20 mm below the power supply.

Can I connect two units of 6EP1332-1SH43 in parallel for a larger load?

The specified parallel arrangement permits up to two units for increased output power.

Does 6EP1332-1SH43 need a protective-earth conductor?

The Class II power supply operates without a protective conductor.

What happens when the output of 6EP1332-1SH43 is shorted?

The short-circuit-proof output follows a constant-current characteristic with a typical current of 3.3 A.

Compatibility & Ordering Notes
Before ordering 6EP1332-1SH43: Size the 24 V load for 2.5 A, apply temperature derating above +55°C and reserve the required top and bottom ventilation spacing.

Before installation

  • Calculate the complete 24 V load and temperature-dependent available current.
  • Match the AC or DC input and select suitable upstream protection.
  • Snap the unit onto the specified 35 mm DIN rail and preserve 20 mm ventilation spacing above and below.
  • Use the screw-terminal conductor sizes and any parallel arrangement appropriate to the installation.
Hot Selling Models
3044131UT6
ESS10
DNC-40-50-PPV-A
M22-DDL-S-X4/X5
CFSH5R4N
OGS700
GV2-P08 021347
ADN-32-35-APA
WAGO 283-604
700-375-LD31
6ES5752-0AA53
AR20-F01BE ISE35-N-65
CF113.018.D 3629749 MAT904120748
TVH015-20y
KHU8DW-1.D

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.