Siemens 6ED1055-1CB10-0BA0 LOGO! DM16 24 Digital Expansion Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Select a compatible LOGO! base and expansion combination.
- Use the 24 V DC supply and signal-voltage class.
- Keep channel current and load-dependent switching rate within their limits.
- Leave the outputs separate and provide the installation protection required for IP20 equipment.
6ED1055-1CB10-0BA0 LOGO! DM16 24 Digital Expansion Module
24 V DC LOGO! expansion with eight digital inputs and eight protected 0.3 A transistor outputs in a four-module-width housing.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ED1055-1CB10-0BA0 |
| Product Type | Digital expansion module |
| Core Function | Extension of digital control signals |
| Application | Compatible LOGO! base modules |
Sixteen additional signal points
Eight digital inputs and eight transistor outputs extend the base-module signal capacity.
Protected transistor switching
Each DC output has short-circuit protection and a maximum current of 0.3 A.
Compact DIN-rail installation
The 72 mm housing occupies four module widths on a 35 mm DIN rail.
Product Overview
6ED1055-1CB10-0BA0 adds eight 24 V DC inputs and eight transistor outputs to a compatible LOGO! control system.
The DM16 24 fits a 35 mm DIN rail and uses short-circuit-protected output channels for small DC loads within the specified switching-frequency limits.
Key Functions
Sixteen additional signal points
Eight digital inputs and eight transistor outputs extend the base-module signal capacity.
Protected transistor switching
Each DC output has short-circuit protection and a maximum current of 0.3 A.
Compact DIN-rail installation
The 72 mm housing occupies four module widths on a 35 mm DIN rail.
Official Specifications
| Digital channel arrangement | 8 inputs and 8 transistor outputs |
|---|---|
| Supply voltage | 24 V DC; 20.4–28.8 V DC |
| Input signal thresholds | Signal 0 below 5 V; signal 1 above 12 V |
| Input current | 0.85 mA quiescent; 1.5 mA at signal 1 |
| Maximum input delay | 1.5 ms for both transitions |
| Output current | 0.3 A maximum per channel |
| Output protection | Short-circuit protection included |
| Output paralleling | Not permitted to increase current |
| Maximum switching rate | 10 Hz resistive; 0.5 Hz inductive |
| Operating temperature | 0 to +55°C |
| Enclosure protection | IP20 |
| Mounting and size | 35 mm DIN rail; 4 module widths |
| Dimensions | 72 × 90 × 53 mm (W × H × D) |
| EMC emission category | Class B |
Frequently Asked Questions
May I parallel outputs on 6ED1055-1CB10-0BA0 to increase the load current?
The outputs must not be paralleled to increase their current capacity.
What inductive switching rate is permitted for 6ED1055-1CB10-0BA0?
The maximum inductive-load switching frequency is 0.5 Hz.
How quickly can 6ED1055-1CB10-0BA0 switch a resistive load?
The stated maximum resistive-load switching frequency is 10 Hz.
Are the outputs of 6ED1055-1CB10-0BA0 relay contacts?
The outputs are 24 V DC transistor channels with a maximum current of 0.3 A each.
What high-level voltage must an input on 6ED1055-1CB10-0BA0 receive?
A signal above 12 V is interpreted as signal 1.
Does 6ED1055-1CB10-0BA0 include short-circuit protection for its outputs?
The transistor outputs include short-circuit protection.
How much rail width should I reserve for 6ED1055-1CB10-0BA0?
Reserve 72 mm, equivalent to four module widths.