EN
Siemens FUM 280 Controller Module 6DP1280-7AA
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS FUM 280 - Analog controller and coupling module
6DP1280-7AA FUM 280 Controller Module
Siemens identifies this FUM 280 module for two autonomous continuous controllers or four AP-controlled analog outputs, with an alternate coupling configuration.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DP1280-7AA |
| Product Type | Analog controller and coupling module |
| Core Function | Runs continuous-control algorithms or provides analog and binary coupling I/O |
| Application or Compatible Series | Autonomous process-control and AP coupling configurations |
Product Overview
Siemens identifies this FUM 280 module for two autonomous continuous controllers or four AP-controlled analog outputs, with an alternate coupling configuration.
Official Siemens documentation identifies the product for Autonomous process-control and AP coupling configurations. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Continuous Control
Two autonomous P, PI, PD or PID controllers can be implemented.
Analog Signal Handling
The module handles 0/4 to 20 mA analog input and output signals.
Coupling Configuration
A separate I/O configuration provides analog and binary coupling channels.
Official Specifications
| Autonomous Continuous Controllers | 2 |
|---|---|
| Supported Controller Types | P, PI, PD and PID |
| AP-Controlled Analog Outputs | 4 |
| Analog Output Signal Range | 0/4 to 20 mA |
| Analog Inputs in Controller Configuration | 4 or 2 |
| Acquired Analog Values | 2 at 0/4 to 20 mA |
| Limit Values per Analog Input | Up to 4 |
| Limit-Switch Processing | Binary signal conditioning |
| Coupling-Mode Analog Inputs | 6 at 0/4 to 20 mA |
| Coupling-Mode Analog Outputs | 6 at 0/4 to 20 mA |
| Coupling-Mode Binary Inputs | 13 |
| Coupling-Mode Binary Outputs | 13 |
| Electrical Isolation | No |
| Redundancy | Suitable in controller configuration; not available in coupling configuration |
| Net Weight | 0.6 kg |
Frequently Asked Questions
Which continuous-control algorithms can 6DP1280-7AA execute autonomously?
Two controllers can run P, PI, PD or PID algorithms.
What analog signal standard is used by 6DP1280-7AA?
The analog inputs and outputs operate with 0/4 to 20 mA signals.
How many AP-controlled analog outputs can 6DP1280-7AA provide?
Four analog controller outputs can be driven by the control algorithm in the AP.
How many limit values can be assigned per analog input on 6DP1280-7AA?
Up to four limit values can be assigned to each analog input.
What I/O is available when 6DP1280-7AA is configured as a coupling module?
The coupling configuration provides six analog inputs, six analog outputs, thirteen binary inputs and thirteen binary outputs.
Can the coupling configuration of 6DP1280-7AA be used redundantly?
No, redundancy is not available in coupling-module operation.
Are the channels of 6DP1280-7AA electrically isolated?
No, the product description identifies the module as operating without electrical isolation.
Compatibility & Ordering Notes
Compatibility Checklist for 6DP1280-7AA
- Match FUM 280 Controller Module and the full article number character by character.
- Verify supported controller types: P, PI, PD and PID.
- Confirm acquired analog values: 2 at 0/4 to 20 mA.
- Preserve the approved settings and connection records used in Autonomous process-control and AP coupling configurations.
