EN
Siemens SIMATIC TDC CP5100 Industrial Ethernet Communication Module 6DD1661-0AE0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC TDC
6DD1661-0AE0 SIMATIC TDC CP5100 Industrial Ethernet Communication Module
The CP5100 is a Siemens SIMATIC TDC communication module that provides an Industrial Ethernet connection for TCP/IP and UDP data exchange.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DD1661-0AE0 |
| Product Type | CP5100 Industrial Ethernet communication module |
| Core Function | Connects SIMATIC TDC systems to Industrial Ethernet using TCP/IP or UDP |
| Application or Compatible Series | SIMATIC TDC racks engineered with D7-SYS communication functions |
Exact Identification
Match 6DD1661-0AE0 character by character and confirm the complete SIMATIC TDC CP5100 Industrial Ethernet Communication Module designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The CP5100 is a Siemens SIMATIC TDC communication module that provides an Industrial Ethernet connection for TCP/IP and UDP data exchange.
A single RJ45 interface connects the SIMATIC TDC rack to an Industrial Ethernet network. The module supports the two documented IP communication protocols for configured process-data exchange. The Ethernet interface adapts automatically between 10 Mbit/s and 100 Mbit/s operation.
Key Functions
Industrial Ethernet Coupling
A single RJ45 interface connects the SIMATIC TDC rack to an Industrial Ethernet network.
TCP/IP and UDP Transport
The module supports the two documented IP communication protocols for configured process-data exchange.
Automatic Link-Rate Selection
The Ethernet interface adapts automatically between 10 Mbit/s and 100 Mbit/s operation.
Official Specifications
| Processor | AM 29000 with 9–12 MIPS performance |
|---|---|
| Communication Memory | 4 MB DRAM |
| Processor Memory | 1 MB video DRAM for the AM 29000 processor |
| Firmware Memory | 512 KB Flash EEPROM |
| Serial Diagnostic Interfaces | Two RS232 (V.24) interfaces at X1 and X2 |
| Maximum Serial Data Rate | 38,400 baud |
| Primary Ethernet Interface | X3 with one 10/100Base-T RJ45 connection and automatic link-rate selection |
| Additional Ethernet Interfaces | X4 Thin-Wire Ethernet (Cheapernet) and X5 Ethernet MAU |
| Maximum UDP Transfer Rate | 1.2 MB/s with a 1,000-byte message length |
| Maximum Transmit Message Length | 64 KB |
| Maximum Receive Message Length | 55 KB |
| Data Transfer Modes | Refresh, Handshake, Multiple and Select |
| Default Router Setting | Adjustable |
| Permitted Rack Slots | Slots 18 to 21 |
| Packaging Dimensions | 30.4 × 23.3 × 6.5 cm |
| Net Weight | 0.473 kg |
Frequently Asked Questions
Which network protocols can I configure on 6DD1661-0AE0?
Configure the communication connection for TCP/IP or UDP according to the existing D7-SYS project.
What physical network connector is used by 6DD1661-0AE0?
The Industrial Ethernet interface uses one RJ45 connection.
Which Ethernet speeds can 6DD1661-0AE0 negotiate?
The interface selects either 10 Mbit/s or 100 Mbit/s automatically.
Can 6DD1661-0AE0 be installed in a standard S7-400 rack?
No, it is a SIMATIC TDC communication module and must be used in the corresponding TDC hardware system.
Which engineering project should be available before commissioning 6DD1661-0AE0?
Use the original D7-SYS project containing the configured communication functions and network parameters.
What network settings should be recorded before replacing 6DD1661-0AE0?
Preserve the IP address, subnet mask, router address, port assignments and configured communication relationships.
What should I verify before ordering 6DD1661-0AE0?
Confirm the complete order number, CP5100 version, rack hardware, RJ45 network connection and required TCP/IP or UDP coupling.
Compatibility & Ordering Notes
Compatibility Checklist
- Use the communication module only in the documented SIMATIC TDC hardware platform.
- Retain the D7-SYS project and the configured TCP/IP or UDP communication functions.
- Record every IP, subnet, router and port setting before exchanging the module.
