EN
Siemens SIMADYN D ITDC Converter Control Expansion Module 6DD1601-0AH0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMADYN D
6DD1601-0AH0 SIMADYN D ITDC Converter Control Expansion Module
The SIMADYN D ITDC expansion module controls line-commutated converters, particularly SITOR power sections, and mounts on a compatible PM5 or PM6 processor module.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DD1601-0AH0 |
| Product Type | ITDC line-commutated converter control expansion module |
| Core Function | Performs command-stage, current-regulator and firing-set functions |
| Application or Compatible Series | SIMADYN D PM5 and PM6 systems controlling line-commutated converters |
Exact Identification
Match 6DD1601-0AH0 character by character and confirm the complete SIMADYN D ITDC Converter Control Expansion Module designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The SIMADYN D ITDC expansion module controls line-commutated converters, particularly SITOR power sections, and mounts on a compatible PM5 or PM6 processor module.
The module combines the command stage, current regulator and firing set for six-pulse line-commutated converters. A dedicated SITOR interface connects the converter-control electronics to the supported power section. Binary and analog outputs, binary inputs and a configurable incremental-encoder input support the converter application.
Key Functions
Integrated Converter Control
The module combines the command stage, current regulator and firing set for six-pulse line-commutated converters.
SITOR Power-Section Interface
A dedicated SITOR interface connects the converter-control electronics to the supported power section.
Encoder and Process I/O
Binary and analog outputs, binary inputs and a configurable incremental-encoder input support the converter application.
Official Specifications
| Compatible Processor Modules | PM5 and PM6 |
|---|---|
| Expansion Slots Occupied | 1 |
| Maximum ITxx Modules per Processor | 2 mechanically; dual-ITDC operation is not supported |
| Converter Pulse Configuration | 6-pulse |
| Maximum Firing-Set Output Frequency | 400 Hz |
| SITOR Interfaces | 1 |
| Analog Outputs | 2 |
| Binary Outputs | 4 |
| Binary Inputs | 4 |
| Incremental Encoder Inputs | 1 with zero pulse |
| Supported Encoder Signal Levels | 5 V or 15 V |
| Maximum Encoder Pulse Frequency | 1 MHz |
| I/O Electrical Isolation | None |
| Packaging Dimensions | 27.6 x 27.6 x 4.5 cm |
| Net Weight | 0.548 kg |
Frequently Asked Questions
Which processor modules can carry 6DD1601-0AH0?
The expansion module mounts on compatible PM5 or PM6 processor hardware.
Can two 6DD1601-0AH0 modules operate on the same processor?
No; although two ITxx expansion positions are mechanically possible, operation with two ITDC modules is not supported.
Which converter topology is controlled by 6DD1601-0AH0?
The firing set is designed for six-pulse line-commutated converters and is particularly suited to SITOR power sections.
Which encoder signals can connect to 6DD1601-0AH0?
The incremental input accepts 5-volt or 15-volt encoder signals and supports a zero pulse.
What is the encoder frequency limit of 6DD1601-0AH0?
The incremental-encoder input accepts pulse frequencies up to 1 MHz.
Are the I/O circuits on 6DD1601-0AH0 electrically isolated?
No; the module inputs and outputs do not provide electrical isolation.
What should be recorded before exchanging 6DD1601-0AH0?
Save the converter parameters, firing configuration, encoder setting, I/O assignments, processor type and SITOR wiring.
Compatibility & Ordering Notes
Compatibility Checklist
- Mount the expansion module only on a compatible PM5 or PM6 processor module.
- Do not configure two ITDC modules for operation on the same processor.
- Preserve the converter, encoder and I/O configuration before removing the module.
