EN
Siemens SIMATIC HMI 6AV2128-3QB06-0AX1 MTP1500 Unified Comfort Panel
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the exact article-number suffix and panel generation.
- Confirm the engineering project, device support and runtime data backup.
- Verify cabinet cutout, mounting depth, power and cable clearances.
- Record network addresses and test every operator function after installation.
6AV2128-3QB06-0AX1 MTP1500 Unified Comfort Panel
15.6-inch multitouch Unified Comfort Panel with 1366 × 768 resolution, 16 million colors and PROFINET connectivity.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6AV2128-3QB06-0AX1 |
| Product Type | MTP1500 Unified Comfort Panel |
| Core Function | Provides multitouch process visualization and operator control over PROFINET |
| Application / Compatible Series | SIMATIC HMI Unified Comfort applications engineered with WinCC Unified Comfort V16 or higher |
Product Overview
Siemens identifies this device as the MTP1500 Unified Comfort Panel for touch-based machine and process operation. Its 15.6-inch widescreen TFT display supports multitouch input, 16 million colors and a 1366 × 768 pixel resolution.
The panel is engineered with WinCC Unified Comfort V16 or higher. Installation planning should verify the cabinet cutout, 24 V DC supply, Ethernet topology, storage media and the complete Unified project before commissioning.
Key Functions
Multitouch Operation
Supports gesture-based and simultaneous touch input on a 15.6-inch widescreen display.
Unified Engineering
Configured in WinCC Unified Comfort V16 or a later compatible release.
Industrial Connectivity
Provides switched and independent Industrial Ethernet connections together with USB and SD-card support.
Official Specifications
| Display Technology | TFT widescreen |
|---|---|
| Screen Diagonal | 15.6 in |
| Active Display Area | 344.2 × 197 mm |
| Display Resolution | 1366 × 768 pixels |
| Display Colors | 16,777,216 |
| Backlight MTBF at 25 °C | 50,000 h |
| Backlight Dimming | 10 to 100% |
| Operator Input | Capacitive multitouch |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 19.2 to 28.8 V DC |
| Rated Current Consumption | 0.7 A |
| Industrial Ethernet | Two switched ports plus one independent port |
| USB Interfaces | 4 × USB 3.1 Gen 1, Type A |
| SD Card Slots | 2 |
| Front / Rear Protection | IP65 / IP20 |
| Housing Front | 398 × 257 mm |
| Mounting Cutout | 382 × 241 mm |
| Mounting Depth | 73 mm |
| Weight without Packaging | 4.3 kg |
Frequently Asked Questions
Which engineering software is required for 6AV2128-3QB06-0AX1?
Use WinCC Unified Comfort V16 or a later compatible release containing the correct device support.
What cabinet cutout is needed for 6AV2128-3QB06-0AX1?
Prepare a 382 × 241 mm cutout and allow adequate rear clearance for the 73 mm mounting depth and connected cables.
How should the PROFINET connections on 6AV2128-3QB06-0AX1 be assigned?
Match the switched and independent Ethernet ports to the network design, device name and IP configuration in the project.
Can 6AV2128-3QB06-0AX1 be installed in portrait orientation?
Portrait and landscape installation are supported; adapt the project layout and cabinet ventilation to the selected orientation.
What power checks are needed before energizing 6AV2128-3QB06-0AX1?
Verify a stable 24 V DC supply within 19.2 to 28.8 V, correct polarity, protective grounding and adequate current capacity.
Which data should be backed up before replacing 6AV2128-3QB06-0AX1?
Archive the complete Unified project, network settings, certificates, user administration, recipes and runtime data required by the application.
What functional tests should follow installation of 6AV2128-3QB06-0AX1?
Check the full touch area, display, Ethernet communication, alarms, user access, data storage and every configured operator action.
