EN
Siemens SIPLUS S7-300 CPU 315-2 DP 6AG1315-2AH14-7AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIPLUS S7-300 - Ruggedized programmable logic controller CPU
6AG1315-2AH14-7AB0 SIPLUS S7-300 CPU 315-2 DP
Siemens specifies this conformal-coated SIPLUS CPU 315-2 DP for -25 to +70 °C service, with 256 KB work memory and two integrated communication interfaces.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6AG1315-2AH14-7AB0 |
| Product Type | Ruggedized programmable logic controller CPU |
| Core Function | Executes S7-300 control programs with MPI and PROFIBUS DP communication |
| Application or Compatible Series | SIPLUS S7-300 systems in extended-temperature environments |
Product Overview
Siemens specifies this conformal-coated SIPLUS CPU 315-2 DP for -25 to +70 °C service, with 256 KB work memory and two integrated communication interfaces.
Official Siemens documentation identifies the product for SIPLUS S7-300 systems in extended-temperature environments. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Extended Environmental Range
Conformal coating and a -25 to +70 °C operating range support demanding installations.
Dual Bus Connectivity
The CPU provides MPI plus a second PROFIBUS DP master/slave interface.
Integrated Program Memory
A required Micro Memory Card stores program and data without a backup battery.
Official Specifications
| Rated Supply Voltage | 24 V DC |
|---|---|
| Permissible Supply Range | 19.2 to 28.8 V DC |
| Mains Failure Buffering | 5 ms |
| Rated Current Consumption | 850 mA |
| Typical No-Load Current | 150 mA |
| Inrush Current | 3.5 A |
| Inrush Energy | 1 A²s |
| Typical Power Loss | 4.5 W |
| Integrated Work Memory | 256 KB |
| Memory Expansion | Not expandable |
| Memory Card | Micro Memory Card required, up to 8 MB |
| Data Retention | At least 10 years on Micro Memory Card |
| Bit Operation Time | 0.05 µs |
| Word Operation Time | 0.09 µs |
| Fixed-Point Operation Time | 0.12 µs |
| Engineering Software | STEP 7 V5.5 SP1 or later; V5.2 SP1 with HSP 218 |
| Operating Temperature | -25 to +70 °C |
| Conformal Coating | Yes |
Frequently Asked Questions
What ambient temperature range is specified for 6AG1315-2AH14-7AB0?
The ruggedized CPU is specified for operation from -25 to +70 °C.
Which programming software can configure 6AG1315-2AH14-7AB0?
Use STEP 7 V5.5 SP1 or later, or V5.2 SP1 with hardware support package 218.
Is a memory card optional for 6AG1315-2AH14-7AB0?
No, a Micro Memory Card is required and capacities up to 8 MB are supported.
How much integrated work memory does 6AG1315-2AH14-7AB0 provide?
The CPU provides 256 KB of integrated, non-expandable work memory.
What input voltage range must be maintained for 6AG1315-2AH14-7AB0?
The permissible range is 19.2 to 28.8 V DC around a 24 V DC nominal supply.
How long is data retained on the memory card used by 6AG1315-2AH14-7AB0?
Stored data is retained for at least ten years.
Why is the coating of 6AG1315-2AH14-7AB0 relevant during replacement?
The conformal coating is part of the SIPLUS environmental design and should be matched when replacing the CPU.
Compatibility & Ordering Notes
Compatibility Checklist for 6AG1315-2AH14-7AB0
- Match SIPLUS S7-300 CPU 315-2 DP and the full article number character by character.
- Verify permissible supply range: 19.2 to 28.8 V DC.
- Confirm inrush current: 3.5 A.
- Preserve the approved settings and connection records used in SIPLUS S7-300 systems in extended-temperature environments.
