Siemens 3RK1922-2BA00 ET 200pro 110 mm Rear Wall Bus Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the 2BA01 base for a Safety Local repair switch.
- Seat the rear wall seals correctly before joining adjacent modules.
- Tighten the mounting bolts to 1.5 Nm.
- Fit the station terminating module and seal unused front connections as required by the station arrangement.
3RK1922-2BA00 ET 200pro 110 mm Rear Wall Bus Module
A rear wall base that carries the data bus and 24 V supply paths for ET 200pro motor starters and special modules.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 3RK1922-2BA00 |
| Product Type | Plug-in backplane base |
| Core Function | Connecting modular starter assemblies to the station bus |
| Application | ET 200pro special modules and motor starters |
Separate supply paths
The base transfers electronics/sensor supply 1L+ and load supply 2L+.
Data and control
The data bus and ASM-400V actuation voltage pass through the rear wall module.
Sealed station assembly
Correct seating of the seals and assembly is essential for the installed protection level.
Product Overview
3RK1922-2BA00 provides the rear wall bus connection for an ET 200pro special module or motor starter. Plug connections carry the station data bus, electronics/sensor supply, load supply and the control voltage for the ASM-400V shutdown module.
The 110 mm module fits the wide motor-starter carrier and mates with the adjacent rear wall modules. Its standalone front protection and the protection of a correctly assembled station differ, so seals, fasteners and the fitted front module are part of the installation arrangement.
Key Functions
Carry the auxiliary supply buses
The base transfers the 24 V electronics/sensor and load-supply paths through the starter station.
Maintain station communication
Plug connections carry the data bus and ASM-400V actuation voltage.
Support a removable front module
Retainers and plug contacts provide the mounting connection for the assigned starter or special module.
Official Specifications
| Busbar rated voltage | 24 V DC for 1L+ and 2L+ |
|---|---|
| Busbar current capacity | 10 A |
| Supply-path allocation | 1L+: electronics/sensor supply; 2L+: load supply |
| Signal transfer | Data bus and ASM-400V actuation voltage |
| Electrical connection | Plug connection |
| Protection arrangement | IP00 at the standalone front; IP65 following correct installation |
| Front touch protection | Finger-safe to IEC 60529 |
| Operating temperature | −25 to +55 °C |
| Storage temperature | −40 to +70 °C |
| Nominal installation width | 110 mm |
| Net weight | 241 g |
Frequently Asked Questions
Can I mount a Safety Local repair switch on 3RK1922-2BA00?
The Safety Local repair switch requires the separately coded rear wall bus module ending in 2BA01.
What should I inspect before engaging 3RK1922-2BA00 on the carrier?
Check that the seals are correctly seated before snapping the rear wall module into place.
Does 3RK1922-2BA00 carry only the electronics supply?
The base transfers both the electronics/sensor supply and the load-supply path.
How much current can the busbars of 3RK1922-2BA00 carry?
The rated busbar current-carrying capacity is 10 A.
Does an exposed 3RK1922-2BA00 alone provide the installed station protection level?
The standalone front is IP00 and the IP65 rating requires correct installation.
Which fastening torque is used when securing 3RK1922-2BA00 in the station?
Tighten the rear wall bus module Phillips bolts to 1.5 Nm.
Can I remove a motor starter fitted to 3RK1922-2BA00 while its feeder remains energized?
De-energize the feeder before removing the motor starter from the rear wall base.