Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
schneider electric atv11hu41m3a altivar 11 2 2 kw three phase drive-0

For Schneider

Home >  Products >  For Schneider

Schneider Electric ATV11HU41M3A Altivar 11 2.2 kW Three-Phase Drive

Manufacturer: Schneider Electric
Condition: Brand New
Lead Time: In Stock
Origin: France
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
Altivar 11

ATV11HU41M3A Altivar 11 2.2 kW Three-Phase Drive

Asian-range Altivar 11 rated at 2.2 kW, with a 10 A nominal output, 15 A transient current and programmable analog and logic signals.

At a Glance

Brand Schneider Electric
Model ATV11HU41M3A
Product Type Variable-speed motor drive
Core Function Adjustable-speed motor operation
Application 200–230 V three-phase motor systems

2.2 kW motor channel

The Asian-range output is rated at 10 A with up to 15 A transient current for sixty seconds.

Programmable command signals

A configurable analog input and four logic inputs support local control arrangements.

Adjustable switching behavior

The 2–16 kHz switching range allows the application to balance switching behavior against the required output-current derating.

Product Overview

ATV11HU41M3A provides adjustable-speed control for a three-phase motor in the Altivar 11 Asian range.

The drive combines sensorless flux-vector control, programmable analog and logic signals and configurable switching frequency, with output-current derating applied for higher switching frequencies and elevated ambient temperatures.

Ordering focus: Match the Asian-range 10 A output rating, three-phase mains supply, motor data and temperature-dependent current allowance.
Key Functions

2.2 kW motor channel

The Asian-range output is rated at 10 A with up to 15 A transient current for sixty seconds.

Programmable command signals

A configurable analog input and four logic inputs support local control arrangements.

Adjustable switching behavior

The 2–16 kHz switching range allows the application to balance switching behavior against the required output-current derating.

Official Specifications
Motor power rating 2.2 kW / 3 hp
Mains supply 3-phase 200–230 V AC, −15%/+15%
Supply frequency 50 Hz ±5% or 60 Hz ±5%
Input line current 15.2 A at the 200 V nominal Asian-range condition
Nominal output current 10 A
Transient output current 15 A for 60 s
Short-circuit rating 5 kA for the specified three-phase supply
Power dissipated at nominal load 94 W
Output frequency 0–200 Hz
Switching frequency 2–16 kHz; continuous power ratings based on 4 kHz
High-frequency current derating 10% at 8 kHz; 20% at 12 kHz; 30% at 16 kHz
Control technique Sensorless flux-vector control with PWM
Programmable analog input 1; 0–5 V, 0–10 V, 0–20 mA or 4–20 mA
Logic inputs 4 programmable inputs; internal 15 V or external 24 V supply
Relay contact capacity 5 A resistive or 2 A inductive at 250 V AC or 30 V DC
Degree of protection IP20
Operating ambient −10 to +50°C with top protective cover removed; up to +60°C with 2.2% current derating per °C above +50°C
Storage ambient −25 to +69°C
Relative humidity 5–93%, noncondensing and without dripping
Altitude allowance 1000 m without derating; 1% current derating per additional 100 m
Frequently Asked Questions

Can I connect ATV11HU41M3A to a single-phase mains supply?

The M3A drive requires the specified three-phase 200–230 V AC supply.

Should I use the North American 10.6 A rating when setting up ATV11HU41M3A?

The Asian-range drive has a nominal output-current rating of 10 A.

Can ATV11HU41M3A continuously deliver full rated current at 16 kHz switching?

Continuous operation at 16 kHz requires a thirty-percent current derating from the 4 kHz rating.

Which external braking arrangement can I use with ATV11HU41M3A?

The specified external VW3A11701 braking module uses a resistor of at least 51 Ω for this drive rating.

Can I configure negative-logic inputs on ATV11HU41M3A?

Negative logic is programmable on the Asian-range drive.

Can a 4–20 mA transmitter connect directly to the analog input of ATV11HU41M3A?

The analog input supports 4–20 mA with a 250 Ω input impedance and no added resistance.

How should I size the load when operating ATV11HU41M3A above +50°C?

Derate current by 2.2% per degree above +50°C up to +60°C and apply the specified top-cover removal condition.

Compatibility & Ordering Notes
Before ordering ATV11HU41M3A: Match the Asian-range 10 A output rating, three-phase mains supply, motor data and temperature-dependent current allowance.

Before installation

  • Use the Asian-range current ratings and the intended three-phase supply.
  • Enter the motor data and configure the analog or logic command arrangement.
  • Apply both switching-frequency and ambient-temperature current derating where required.
  • Select the optional braking module, resistor and thermal protection as a matched installation.
Hot Selling Models
3RT2015-1CK64-3MA0
CXSL15-10
LC1D18BD TeSys - 035477
SZ4315.400
OP320A
3RK1901-1NR00
3431.030
ADN2080IPA
4140-840
3RV2011-0EA10
3LD2064-0TB53
EVM011 ADOAH043VAS0025H04
3RT2016-1QB41
HEL-1-D-MAXI
NHI11-PKZ2

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.