Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
mitsubishi electric q06hcpu melsec q high performance cpu-0

Others

Home >  Products >  Others

Mitsubishi Electric Q06HCPU MELSEC-Q High Performance CPU

Manufacturer: Mitsubishi Electric
Condition: Brand New
Lead Time: In Stock
Origin: Japan
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
MELSEC-Q

Q06HCPU MELSEC-Q High Performance CPU

60K-step Q-series CPU with 34 ns LD execution, USB and RS-232 engineering access, and refresh or direct I/O access.

At a Glance

Brand Mitsubishi Electric
Model Q06HCPU
Product Type Programmable controller CPU
Core Function Cyclic sequence-program execution
Application MELSEC-Q modular PLC systems

Fast sequence processing

LD instructions execute in 34 ns and MOV instructions in 102 ns, with a configurable constant-scan period.

Program and data memory

A 60K-step program area works with built-in standard ROM and revision-dependent standard RAM for PLC files and data.

Engineering and expansion

USB and RS-232 provide programming access, while compatible Q-series base units support modular system expansion.

Product Overview

Q06HCPU executes sequence control in a modular MELSEC-Q PLC system, combining a 60K-step program capacity with high-speed instruction processing.

The CPU supports refresh I/O and direct access, multiple sequence-programming languages and engineering access through USB or RS-232, with memory-card options for program and data handling.

Ordering focus: Keep the installed project, memory-card format, battery and CPU hardware revision consistent when replacing a Q-series controller.
Key Functions

Fast sequence processing

LD instructions execute in 34 ns and MOV instructions in 102 ns, with a configurable constant-scan period.

Program and data memory

A 60K-step program area works with built-in standard ROM and revision-dependent standard RAM for PLC files and data.

Engineering and expansion

USB and RS-232 provide programming access, while compatible Q-series base units support modular system expansion.

Official Specifications
Program capacity 60K steps, corresponding to 240K bytes before file-header overhead
Instruction execution time 34 ns for LD X0; 102 ns for MOV D0 D1
Constant-scan setting 0.5–2000 ms in 0.5 ms increments
I/O control method Refresh mode with direct DX/DY access available
Standard ROM capacity 240K bytes
Standard RAM capacity 64K bytes on early units; 128K bytes from serial prefix 02092
Program I/O device range 8192 points, X/Y0–1FFF
Physical I/O address capacity 4096 points, X/Y0–FFF
Default relay device capacities 8192 points each for M, L and B
Default timer and counter capacities 2048 T timers and 1024 C counters
Default data-register capacity 12288 D registers
Programming communication rates USB up to 12 Mbit/s; RS-232 up to 115.2 kbit/s
Standard ROM write endurance 100000 writes maximum
Internal 5 V current 0.64 A
Operating ambient temperature 0 to +55°C
Storage ambient temperature −25 to +75°C for an all-Q system
Permitted relative humidity 5–95% noncondensing for an all-Q system
Operating altitude 0–2000 m
Dimensions 27.4 × 98 × 89.3 mm (W × H × D)
Weight 0.20 kg
Frequently Asked Questions

Can I connect a programming computer to Q06HCPU by USB?

The CPU provides USB programming communication up to 12 Mbit/s and RS-232 communication up to 115.2 kbit/s.

How much sequence-program space is available in Q06HCPU?

The program area holds 60K steps with file-header overhead deducted from the executable sequence capacity.

Why can the standard RAM differ between two Q06HCPU units?

Early units have 64K bytes of standard RAM, while units from serial prefix 02092 have 128K bytes.

Does the 8192-point device range mean Q06HCPU accepts 8192 physical I/O points?

The program I/O device range contains 8192 points, while the address capacity for actual I/O modules is 4096 points.

Can I set a fixed scan period on Q06HCPU?

The constant-scan function can be set from 0.5 to 2000 ms in increments of 0.5 ms.

Which battery is used for memory backup in Q06HCPU?

The CPU uses a Q6BAT battery for the backed-up memory functions.

Can I engineer Q06HCPU with GX Works2?

The High Performance QCPU family can be engineered using GX Works2 or GX Developer with versions appropriate to the required functions.

Compatibility & Ordering Notes
Before ordering Q06HCPU: Keep the installed project, memory-card format, battery and CPU hardware revision consistent when replacing a Q-series controller.

Before installation

  • Preserve the PLC project and device data before replacing the CPU or changing memory arrangements.
  • Match the CPU revision and serial-prefix-dependent functions to the existing program requirements.
  • Secure an RS-232 cable that remains connected during operation to prevent unintended disconnection.
  • Use the Q6BAT battery and the memory-card type supported by the CPU hardware revision.
Hot Selling Models
Allen-Bradley 1734-OB2EP
VL18-3P3840 6013635
Z2FS 6-2-44/2QV R900481624
FU-13
6ES5374-2AH21
Allen-Bradley 1734-EP24DC
ZM-2,4-PKZ2 ZM2,4PKZ2
P1MV 491135
65.F16.701 R272
750-300
IN-80-13-00
QS18VP6DQ
E2A-S12KS04-M5-B1
11-0104-12-00
6ES7132-6BH01-0BA0

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.