IS220PVIBH1AD Vibration Module

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IS220PVIBH1AD
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Description

IS220PVIBH1AD is a Vibration Monitor (PVIB) pack developed by GE under the Mark Vle control system. The Vibration Monitor (PVIB) pack connects one or two I/O Ethernet networks to the TVBA vibration terminal board electrically. The pack includes a processor board, an acquisition board, and a daughterboard, which are all common to all Mark Vle distributed I/O packs.

1 The pack reads vibration or proximity information from the following sensor types using channels 1 through 8: Proximitors, integrated output accelerometers (Channels 1-3 only), Velomitor, or seiseismic channels 9 through 12 only support proximitors, while channel 13 can input either a Keyphasor signal-type or a proximity-type signal.

2 Dual RJ45 Ethernet ports and 3-pin power input are used to power the pack. For frame rates slower than 100 Hz, the PVIB enables twin Ethernet networks. It supports frame rates of 3.125, 6.25, 12.5,25, 50, and 100 Hz over an Ethernet network.

3 A DC-37 pin connector connects directly to the matching terminal board connector for output.Indicator LEDs are used to display visual diagnostics.

Applications

Thermal/Nuclear Power Plants: Monitor bearing vibrations in large steam turbines, gas turbines, and generators to prevent mechanical damage.

Oil and Gas Plants: Monitor the operating status of large centrifugal compressors and pump stations.

Heavy Chemical Plants: Manage vibration-interlocked trip protection for critical rotating equipment.

Compatibility

Dual RJ45 Ethernet ports and 3-pin power input are used to power the pack. For frame rates slower than 100 Hz, the PVIB enables twin Ethernet networks. It supports frame rates of 3.125,6.25, 12.5,25, 50, and 100 Hz over an Ethernet network. A DC-37 pin connector connects directly to the matching terminal board connector for output. Indicator LEDs are used to display visual diagnostics.

Installation

Follow the procedure to install the pack

1. Secure the terminal board you want to use.

2. Connect the PVIB 1/O pack to the terminal board connectors directly.

3. Use the threaded studs close to the Ethernet ports to mechanically secure the packs.

4. Depending on the system configuration, connect one or two Ethernet wires. The pack can be used with either port. When using dual connections, ENET1 should be connected to the network linked with the R controller.

5. Connect the pack to the power source by plugging in the connector on the side

6. Configure the I/O pack as needed using the ToolboxST* application

7. Check that the N28 power supply daughterboard on the TVBA is properly placed in the TvBA connector.

FAQ

Q: Frequently Asked Questions
A: What is IS220PVIBH1AD?
IS220PVIBH1AD is a Vibration Module by GE Mark Vle series GE.

Q: How to Obtain IS220PVIBH1AD?
A: We provides IS220PVIBH1AD as well as other turbine control products. Contact us.

Q: Do you provide warranty as standard?
A: We provide a full 12-month warranty for IS220PVIBH1AD. If any problems occur within 12 months from the delivery date, you can contact our team for guidance and support.

Q: How to Check Price and Availability for IS220PVIBH1AD?
A: Please contact John Yang for sales at +86-18150117685 or request a quote.