IC697CGR935 CPU module, China IC697CGR935 CPU module Manufacturers, Suppliers, Factory

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IC697CGR935
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Model:	IC697CGR935
Module Type:	One Slot Controller Module (CPU)
Dimensions (HxWxD):	4 x 21.8 x 29.1 cm
Weight:	0.75 kg
Battery Shelf Life:	5 years at 20°C (68°F)
Memory Retention:	6 months nominal without applied power
Current Requirement +5V Bus:	3.1 A nominal
Operating Temperature (with forced air):	0°C to 60°C (32°F to 140°F), 70 CFM forced air required
Operating Temperature (without forced air):	0°C to 50°C (32°F to 122°F)
Time of Day Clock Accuracy:	±3.5 seconds per day maximum
Elapsed Time Clock Accuracy:	±0.01% maximum
Serial Ports:	Port 1: RS-232 compatible; Port 2: RS-485 compatible (optocoupler isolated); Port 3: RS-485 compatible (not isolated)
Supported Protocols:	SNP Slave only
Peripheral Connections:	Programmer Serial Attachment or other serial devices

Description

The IC697CGR935 module is a CPU module in the GE Fanuc series, which permits fluctuating point calculations mandatory for CPU redundancy applications. The IC697CGR935 module in the Redundancy System is used as the controller. There are two control methods to note when using the IC697CGR935. In the GHS process, several single bus networks with one redundant controller are used in each synchronized PLC. When using the GDB process, multiple I/O networks are used with single or double buses in each synchronized PLC. Each control method can be easily activated and used without difficulty. In the IC697CGR935 module, the memory board delivers data, and program memory is included with the module. The IC697CGR935 can be operated remotely or by the three position RUN/STOP switch. Positioned on the front of the module are the LEDs, which specify the status of the CPU.

Applications

Large-scale metallurgical and hot rolling mills: Control continuous rolling mills and automatic blast furnace charging. Analysis: Its powerful floating-point computing capabilities can process complex mathematical models in real time, ensuring the dimensional accuracy of steel.

Power plants and large-scale power plants: Used for turbine speed regulation (DEH) and boiler coordinated control. Analysis: Supports multi-CPU redundancy architecture, ensuring 24/7 uninterrupted operation of generator units and extremely fast response to instantaneous protection signals.

Oil refining and gas processing plants: Manage large compressor units and tank farm interlocks. Analysis: Supports large-scale I/O (tens of thousands of points), and can centrally process the complex process logic of the entire plant within a single CPU.

Paper and high-speed printing plants: Control paper machine drives and tension synchronization. Analysis: High-speed instruction execution cycle ensures that the production line does not experience material interruption at high linear speeds.

Features

Required for CPU redundancy applications

Supports floating point calculation

Single slot CPU

12K inputs and 12K outputs (any mix)

Up to 8K analog I/O

0.4 microseconds per boolean function

96 MHz, 80486DX4 microprocessor

Supports IC660/IC661 and IC697 I/O products

Programmed by MS-DOS or Windows based software products

Supports 1 Mbyte of battery-backed fast CMOS RAM memory in the same slot

Configurable data and program memory

Battery-backed calendar clock

Three position operation mode switch

Password controlled access

Keyswitch memory protection

Seven status LEDs

Software configuration (No DIP switches or jumpers to set)

Reference information inside front door

Three Series Ninety Protocol (SNP Slave) communications ports

Functions

The IC697CGR935 is a single slot programmable controller CPU which allows floating point calculations and is required for CPU redundancy applications. The IC697CGR935 is programmed and configured by MS-DOS or Windows programming software to perform real time control of machines, processes and material handling systems. The IC697CGR935 communicates with I/O and smart option (specialty) modules over the rack mounted backplane (IC697CHS750, 790, 791) by way of the VME C.1 Standard format.

Supported option modules include all IC697 LAN interface modules, several Coprocessor modules, Bus Controller for IC660/IC661 I/O, Communications modules, and all of the IC697 family of discrete and analog I/O modules.

Installation

It is the responsibility of the OEM, system integrator, or end user to properly install the PLC equipment for safe and reliable operation. Product manuals provide detailed information about installation, startup, and proper use of the PLC equipment. The installation manual, shipped with your PLC programming software, describes how to properly install the equipment. If the PLC installation must comply with supported standards, such as FCC or CE Directives, please refer to the Installation Requirements for Conformance to Standards, shipped with the PLC programming software, for additional guidelines.