EN
- Overview
- Specifications
- Description
- Applications
- Overcurrent Protection
- FAQ
- Recommended Products
Overview
Place of Origin: |
USA |
Brand Name: |
GE |
Model Number: |
IC695PSA040 |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Model: |
IC695PSA040 |
|
Module Type: |
RX3i Universal Backplane Power Supply |
|
Dimensions (HxWxD): |
7 x 13.3 x 13.5 cm |
|
Weight: |
0.52 kg |
|
Nominal Rated Voltage: |
120/240 VAC or 125 VDC |
|
Input Voltage Range: |
85 to 264 VAC; 100 to 300 VDC |
|
Input Power (Max, Full Load): |
70 Watts maximum |
|
Inrush Current: |
4 Amps, 250 milliseconds maximum |
|
Output Power (Total Maximum): |
40 Watts maximum |
|
Output Power 5.1 VDC: |
30 Watts maximum |
|
Output Power 3.3 VDC: |
30 Watts maximum |
|
Output Voltage 24 VDC: |
19.2 VDC to 28.8 VDC |
|
Output Voltage 5.1 VDC: |
5.0 VDC to 5.2 VDC (5.1 VDC nominal) |
|
Output Voltage 3.3 VDC: |
3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
|
Output Current 24 VDC: |
0 to 1.6 Amps |
|
Output Current 5.1 VDC: |
0 to 6 Amps |
|
Output Current 3.3 VDC: |
0 to 9 Amps |
|
Isolation (Input to Backplane): |
250 VAC continuous; 1500 VAC for 1 minute |
|
Ripple (All Outputs): |
150 mV |
|
Noise (All Outputs): |
150 mV |
|
Ride-Through Time: |
20 ms |
|
Wiring Terminals: |
Each terminal accepts one 14 AWG to 22 AWG wire |
|
Current per Terminal: |
6 Amps |
|
Max Number of Daisy-Chained PSA040 Supplies: |
Up to 4 |
Description
The PACSystems* RX3i power supply IC695PSA040 is a 40-Watt supply that operates from an input voltage source in the range of 85 to 264 VAC or 100 VDC to 300 VDC.
This power supply provides three outputs:
+5.1 VDC output.
+24 VDC relay output that can be used to power circuits on Output Relay modules.
+3.3 VDC. This output is used internally by RX3i modules with IC695 catalog numbers.
Applications
Water treatment/environmental protection plants: Provide main power for distributed PLC monitoring stations and water pump control cabinets.
Power plants and substations: Utilize its 125V VDC input characteristic to directly connect to the station's DC operating power system.
Food and beverage plants: Used as logic control power in independent control cabinets for packaging machines, filling lines, etc.
Automotive manufacturing plants: Used for distributed I/O racks in body-in-white welding or small assembly lines.
Pharmaceutical plants: Control of cleanroom air conditioning systems (HVAC) or laboratory environmental monitoring.
Overcurrent Protection
The 5.1 VDC output is electronically limited to 7 Amps. The 3.3 VDC output is limited to 10 Amps. If an overload (including short circuits) occurs, it is sensed internally and the Power Supply shuts down. The Power Supply continually tries to restart until the overload condition is removed. A non-repairable internal fusible link in the input line is provided as a backup. The Power Supply usually shuts down before the fuse blows. The fuse also protects against internal supply faults. The CPU Fault Table shows a fault if any Overtemperature, Overload, or P/S Fault occurs. There is no additional indication if the Power Supply fuse blows.
FAQ
Q: Does the IC695PSA040 come with a warranty?
A: Yes, the IC695PSA040 includes a 1-year warranty.
Q: What is the difference between the IC695PSA040 and IC695PSA140 power supplies?
A: The IC695PSA040 is a standard power supply and does not support load sharing, extended capacity, or redundancy, while the IC695PSA140 supports these functions.
Q: What is the output power rating of the IC695PSA040?
A: The IC695PSA040 has an output power rating of 40 Watts.
Q: What is the maximum number of daisy-chained IC695PSA040 permitted for installation?
A: Up to four (4) IC695PSA140 power supplies are permitted.
