EN
- Overview
- Specifications
- Description
- Applications
- Competitive Advantage
- FAQ
- Recommended Products
Overview
Place of Origin: |
Sweden |
Brand Name: |
ABB |
Model Number: |
3BSE019050R200 PFTL-301E-0.2KN |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Parameter |
Value |
|
Part Number |
3BSE019050R200 PFTL-301E-0.2KN |
|
Module Type |
Load Cell |
|
Dimensions |
27 × 27 × 5 cm |
|
Weight |
5.42 kg |
|
Cable |
8 m cable (horizontal) |
|
Adapter Plates |
Top and bottom adapter plates included |
|
Nominal Load |
0.1 / 0.2 / 0.5 / 1.0 kN (22 / 45 / 112 / 225 lbs) |
|
Extended Load |
0.15 / 0.3 / 0.75 / 1.5 kN |
|
Permitted Load (Transverse) |
0.3 / 0.6 / 1.5 / 3.0 kN |
|
Overload Capacity (Measurement Direction) |
0.3 / 0.6 / 1.5 / 3.0 kN |
|
Overload Capacity (Transverse) |
0.5 / 1.0 / 2.5 / 5.0 kN |
|
Deflection |
0.05 / 0.05 / 0.07 / 0.13 mm |
|
Spring Constant |
2.0 / 4.0 / 7.0 / 8.0 kN/mm |
|
Environmental Rating |
IP67 |
|
Material |
Stainless steel |
|
Output Signal |
4–20 mA or 0–10 V |
|
Supply Voltage |
12 V DC |
|
Operating Temperature |
-20 °C to +60 °C |
Description
3BSE019050R200 PFTL-301E-0.2KN is a load cell. Unlike indenters that measure the vertical component of force, these do not measure the weight of the tension roller. Therefore, the specifications of these indenters can be determined solely based on the tension magnitude and the functionality corresponding to the upper limit of their measurement range (where the indenter performs best). As a result, the indenter always provides the best tension measurement performance, even with a heavy roller and low tension.
Applications
Plastic film factories: Used for precise tension control during the unwinding and winding of ultra-thin plastic films.
Textile printing and dyeing factories: Monitor the tension of fabrics on continuous processing lines to prevent stretching and deformation.
Paper processing plants: Monitor tension in the post-processing stages of lightweight paper products such as tissues and specialty papers.
Packaging and printing plants: Maintain constant tension on the film carrier during multi-color printing.
Competitive Advantage
High-quality indenter with no drift and no need for recalibration
Large measuring range
Easy to use
FAQ
Q: What tension is the 3BSE019050R200 PFTL-301E-0.2KN suitable for measuring?
A: This model has a maximum rated load of 0.2kN and is best suited for measuring the tension of extremely lightweight, high-precision thin materials.
Q: Can the 3BSE019050R200 PFTL-301E-0.2KN sensor be repaired if it's broken?
A: Due to its internal encapsulated magnetic coil, physical damage is usually irreparable; the entire unit must be replaced.
Q: Are there any requirements for the installation direction of 3BSE019050R200 PFTL-301E-0.2KN?
A: Yes. It must be installed strictly according to the force direction arrow on the sensor to ensure the resultant force direction is consistent with the measuring spindle.
Q: Why does the system display a negative tension value from 3BSE019050R200 PFTL-301E-0.2KN?
A: This is usually due to reversed wiring polarity or the installation position being opposite to the point of force application. This can be resolved by adjusting the software or swapping the signal cable.
Q: Is a dedicated amplifier required for 3BSE019050R200 PFTL-301E-0.2KN?
A: Yes. Typically, an ABB PFEA series tension amplifier is needed to convert the weak induction signal into a 4–20mA or bus signal.
