330910-00-06-10-02-00 3300 NSv Proximity Probe

Overview

Place of Origin:	USA
Brand Name:	Bently Nevada
Model Number:	330910-00-06-10-02-00
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Quick Detail

Description

The 330910-00-06-10-02-00 3300 NSv Proximity Probe is an eddy-current displacement probe used in automation monitoring systems for compressors, turbines, and pumps. The 330910-00-06-10-02-00 3300 NSv Proximity Probe uses an M10×1 threaded AISI 304 stainless steel case, 60 mm body length, and PPS probe tip to measure shaft movement inside tight bearing housings. With a 1.5 mm linear range and recommended 1.0 mm gap, the 330910-00-06-10-02-00 3300 NSv Proximity Probe outputs vibration and axial position voltage directly to PLC or DCS protection modules.

The 330910-00-06-10-02-00 3300 NSv Proximity Probe includes a 1.0 m standard cable and miniature coaxial ClickLoc connector for cabinet wiring (0.2–1.5 mm² conductors). Output resistance is 50 Ω and supply sensitivity is less than 2 mV/V, enabling accurate shaft displacement signals for alarm relay logic. Operating temperature ranges from −52 °C to +177 °C, allowing the 330910-00-06-10-02-00 3300 NSv Proximity Probe to monitor radial vibration, thrust position, and keyphasor reference on small shafts under continuous machine operation.

Applications

Install 330910-00-06-10-02-00 3300 NSv Proximity Probe on centrifugal compressor radial bearing
The 330910-00-06-10-02-00 3300 NSv Proximity Probe measures shaft displacement using a 1.5 mm linear range and 1.0 mm gap. The probe outputs vibration voltage to a monitoring rack so operators can observe rotor movement during load changes.

Measure thrust collar movement on process gas compressor
Facing the thrust disk, the 330910-00-06-10-02-00 3300 NSv Proximity Probe sends axial position signal to PLC protection logic. The 50 Ω output resistance allows direct connection to displacement monitoring modules without signal conditioning.

Monitor small pump shaft vibration inside narrow casing
With a 60 mm case and M10×1 thread, the 330910-00-06-10-02-00 3300 NSv Proximity Probe fits compact bearing housings. The PPS tip reads vibration on shafts smaller than 51 mm and transmits signals to control cabinets.

Specifications

Competitive Advantage

Mount directly into metric threaded bearing covers
The M10×1 thread and 15 mm thread engagement allow the 330910-00-06-10-02-00 3300 NSv Proximity Probe to be installed without adapter sleeves in metric machinery.

Send clear signal to monitoring modules during power variation
Supply sensitivity below 2 mV/V allows the 330910-00-06-10-02-00 3300 NSv Proximity Probe to maintain accurate displacement voltage even when cabinet supply fluctuates.

Operate in hot compressor areas
The −52 °C to +177 °C operating range and stainless steel case allow the 330910-00-06-10-02-00 3300 NSv Proximity Probe to run near bearings and oil seals exposed to elevated temperature.

Keep cable connected during machine vibration
The miniature coaxial ClickLoc connector locks the cable to the probe. The 330910-00-06-10-02-00 3300 NSv Proximity Probe prevents loose wiring inside vibrating equipment panels.

Connect to existing Bently monitoring systems
With a 7.87 V/mm output scale factor, the 330910-00-06-10-02-00 3300 NSv Proximity Probe feeds standard 3300 monitoring racks, enabling quick replacement of older probes during maintenance.