EN
Siemens SIMATIC S7-1500T 6ES7515-2UM01-0AB0 CPU 1515TF-2 PN
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7515-2UM01-0AB0 CPU 1515TF-2 PN
Official Siemens identification and specifications for 6ES7515-2UM01-0AB0, prepared for accurate fail-safe and motion-control replacement matching.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7515-2UM01-0AB0 |
| Product Type | CPU 1515TF-2 PN |
| Core Function | Fail-safe automation with integrated Motion Control |
| Compatible Series | SIMATIC S7-1500T systems |
Exact Identification
Match article number 6ES7515-2UM01-0AB0, hardware status FS04 and firmware V2.9.
PROFINET Architecture
X1 provides PROFINET IRT through a 2-port switch; X2 is a separate single-port Ethernet interface.
Safety & Technology
Fail-safe CPU with PROFIsafe, Motion Control, PLe and SIL 3 capability.
Product Overview
6ES7515-2UM01-0AB0 is officially identified by Siemens as a SIMATIC S7-1500T CPU 1515TF-2 PN spare part with 750 KB work memory for the program, 3 MB for data, a PROFINET IRT interface with 2-port switch, a second Ethernet interface, 30 ns bit performance and a required SIMATIC Memory Card.
Siemens lists hardware functional status FS04 and firmware V2.9. The product is cancelled from October 1, 2024, and Siemens identifies 6ES7515-2UN03-0AB0 as the successor.
Key Functions
Fail-Safe and Motion Control
Supports PROFIsafe, Motion Control, up to 2,400 Motion Control resources and 120 Extended Motion Control resources; the highest specified safety levels are PLe and SIL 3.
Dual PROFINET Connectivity
X1 is a two-port PROFINET IRT interface with an integrated switch. X2 is a one-port Ethernet interface that supports PROFINET IO Controller and Device operation without IRT.
Engineering and Diagnostics
STEP 7 TIA Portal support starts with V17 for firmware V2.9 and V14 for firmware V2.1. The CPU provides a 3,200-entry diagnostic buffer, four configurable traces and a 6.1 cm display.
Official Specifications
| Hardware Functional Status | FS04 |
|---|---|
| Firmware Version | V2.9 |
| Program Work Memory | 750 KB |
| Data Work Memory | 3 MB |
| Maximum Plug-In Load Memory | 32 GB |
| SIMATIC Memory Card Slots | 1; a SIMATIC Memory Card is required |
| Typical Bit Operation Time | 30 ns |
| Typical Word Operation Time | 36 ns |
| Typical Fixed-Point Operation Time | 48 ns |
| Typical Floating-Point Operation Time | 192 ns |
| Available S7 Counters and Timers | 2,048 counters and 2,048 timers |
| Input and Output Address Areas | 32 KB for inputs and 32 KB for outputs |
| Integrated PROFINET Interface Arrangement | X1 has two RJ45 ports, an integrated switch and IRT; X2 has one RJ45 port without an integrated switch or IRT |
| Maximum Communication Connections | 192 total; 108 through the integrated interfaces |
| Motion Control Resources | 2,400 standard resources and 120 extended resources |
| Supply Voltage | 24 V DC rated; permissible range 19.2 to 28.8 V DC |
| Rated Current Consumption | 0.8 A |
| Typical Power Loss | 6.3 W |
| Operating Temperature Limits | 0 to 60 °C for horizontal installation; 0 to 40 °C for vertical installation |
| Physical Dimensions and Approximate Weight | 70 x 147 x 129 mm; approximately 830 g |
Official source: Siemens official technical data PDF for 6ES7515-2UM01-0AB0. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
Which STEP 7 TIA Portal versions can configure 6ES7515-2UM01-0AB0?
STEP 7 TIA Portal supports firmware V2.9 from version V17 and firmware V2.1 from version V14 or higher.
How are the two PROFINET interfaces arranged on 6ES7515-2UM01-0AB0?
X1 has two RJ45 ports, an integrated switch and IRT capability. X2 has one RJ45 port, no integrated switch and no IRT capability; both can operate as PROFINET IO Controller or Device interfaces.
Does 6ES7515-2UM01-0AB0 require a SIMATIC Memory Card?
Yes. The CPU has one card slot, and a SIMATIC Memory Card is required; Siemens specifies plug-in load memory up to 32 GB.
Which fail-safe performance levels are specified for 6ES7515-2UM01-0AB0?
The highest safety class specified for safety mode is Performance Level e according to ISO 13849-1 and SIL 3 according to IEC 61508.
What motion-control capacity is available on 6ES7515-2UM01-0AB0?
The CPU provides 2,400 Motion Control resources and 120 Extended Motion Control resources. Siemens gives typical values of seven positioning axes at a 4 ms cycle or fourteen at an 8 ms cycle.
What installation temperature limits apply to 6ES7515-2UM01-0AB0?
For horizontal installation, the specified operating range is 0 to 60 °C; for vertical installation it is 0 to 40 °C. Siemens notes lower display operating thresholds within those ranges.
What should an engineer verify before replacing 6ES7515-2UM01-0AB0?
Verify CPU 1515TF-2 PN identification, hardware status FS04, firmware V2.9, TIA Portal compatibility, the required SIMATIC Memory Card, and the X1/X2 network roles. Siemens lists a successor for lifecycle planning.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7515-2UM01-0AB0
- Confirm CPU 1515TF-2 PN and the full 6ES7515-2UM01-0AB0 suffix against the nameplate.
- Match the STEP 7 TIA Portal version to the installed firmware and fail-safe project.
- Preserve the X1 PROFINET IRT two-port network and the separate X2 Ethernet connection assignment.
- Confirm the required SIMATIC Memory Card; if planning migration, evaluate Siemens successor 6ES7515-2UN03-0AB0 separately.
