Siemens SIMATIC S7-1200 6ES7222-1BF32-0XB0 SM 1222 Digital Output
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIMATIC S7-1200 6ES7222-1BF32-0XB0 SM 1222
SM 1222 signal module with eight 24 V DC transistor outputs rated at 0.5 A for expansion of SIMATIC S7-1200 controllers.
At a Glance
| Brand / Manufacturer | Siemens |
|---|---|
| Model / Article Number | 6ES7222-1BF32-0XB0 |
| Product Type | SM 1222 digital output module |
| Core Function | Adds eight 24 V DC transistor outputs rated at 0.5 A |
| Application / Compatible Series | SIMATIC S7-1200 controller expansion |
Eight transistor outputs arranged in single-channel groups.
Supports resistive and lamp loads within official ratings.
Outputs are isolated from the backplane bus at 500 V AC.
Product Overview
6ES7222-1BF32-0XB0 is officially identified by Siemens as SIMATIC S7-1200 SM 1222 digital output module with eight 24 V DC transistor outputs rated at 0.5 A.
The complete article number 6ES7222-1BF32-0XB0 should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, connector design or approved system use.
Key Functions
Model-Specific Configuration
6ES7222-1BF32-0XB0: Provides eight transistor digital outputs for 24 V DC loads.
System Interface
6ES7222-1BF32-0XB0: Each output is rated at 0.5 A; outputs are arranged as one group.
Replacement Control
6ES7222-1BF32-0XB0: Siemens specifies external short-circuit protection; typical module power loss is 1.5 W.
Official Specifications
| Permissible Supply Range | 20.4 V DC to 28.8 V DC |
|---|---|
| Backplane Bus Current, Maximum | 120 mA at 5 V DC |
| Typical Power Loss | 1.5 W |
| Output Grouping | One output per group |
| Short-Circuit Protection | Not integrated; external protection required |
| Inductive Shutdown Limitation | Typically L+ -48 V |
| Lamp Load, Maximum | 5 W |
| Signal 0 Output Voltage, Maximum | 0.1 V with 10 kΩ load |
| Signal 1 Output Voltage, Minimum | 20 V DC |
| Signal 0 Residual Current, Maximum | 10 µA |
| Output Delay | 50 µs maximum from 0 to 1; 200 µs maximum from 1 to 0 |
| Total Output Current | 4 A maximum at 50 °C, horizontal installation |
| Cable Length | 500 m shielded; 150 m unshielded |
| Diagnostic Alarm | Supported |
| Isolation from Backplane Bus | 500 V AC |
| Protection Rating | IP20 |
| Operating Temperature | -20 °C to +60 °C horizontal; -20 °C to +50 °C vertical |
| Storage and Transport Temperature | -40 °C to +70 °C |
| Dimensions | 45 × 100 × 75 mm |
| Weight | Approximately 180 g |
Frequently Asked Questions
Which SIMATIC controller family accepts 6ES7222-1BF32-0XB0?
It is an SM 1222 expansion module for the S7-1200 platform.
What external protection is required for 6ES7222-1BF32-0XB0 outputs?
Provide external short-circuit protection because it is not integrated in the module.
What supply range should be used with 6ES7222-1BF32-0XB0?
Use 20.4 to 28.8 V DC.
What output response time should be allowed for 6ES7222-1BF32-0XB0?
Allow up to 50 µs for switching from 0 to 1 and 200 µs from 1 to 0.
How long may field cables be for 6ES7222-1BF32-0XB0?
The official limits are 500 m for shielded cables and 150 m for unshielded cables.
Which mounting temperature limits apply to 6ES7222-1BF32-0XB0?
Horizontal installation supports -20 °C to +60 °C; vertical installation supports -20 °C to +50 °C.
What should be checked after commissioning 6ES7222-1BF32-0XB0?
Verify output status, diagnostic alarms, load current, external protection and the required front connector.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7222-1BF32-0XB0
- Match the complete article number 6ES7222-1BF32-0XB0 without shortening the suffix.
- Confirm the installed SIMATIC S7-1200 family and hardware revision.
- Verify: Provides eight transistor digital outputs for 24 V DC loads.
- Confirm included connectors and accessories in the written quotation.