Siemens SIMATIC S7-1200 3RK7243-2AA30-0XB0 CM 1243-2 AS-Interface Master
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Czech Republic
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm a SIMATIC S7-1200 CPU with capacity for another communication module.
- Keep the station within the three-module total limit for communication modules and processors.
- Match every AS-i slave address, profile and standard or A/B addressing mode.
- Verify the AS-i supply, Power24V design and any required DCM 1271 data decoupling.
- Restore process-image, peripheral-address and record-transfer assignments.
- Check screw-terminal wiring, cable polarity, shield practice and segment current demand.
- Confirm the required bus and CPU exchange cycle against the application timing.
Siemens · SIMATIC S7-1200 CM 1243-2
3RK7243-2AA30-0XB0 CM 1243-2 AS-Interface Master Communication Module
Siemens 3RK7243-2AA30-0XB0 is the SIMATIC S7-1200 CM 1243-2 AS-Interface master communication module to AS-i specification V3.0. It exchanges digital and analog process data with the CPU through the backplane bus and is configured in STEP 7 or through the command interface.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 3RK7243-2AA30-0XB0 |
| Product Type | AS-Interface Master Communication Module |
| Core Function | Connects AS-i field devices to a compact controller |
| Application or Compatible Series | SIMATIC S7-1200 distributed sensor and actuator networks |
AS-i Segment Design
Count standard and A/B-addressed slaves, calculate the bus cycle and confirm the required process-image capacity.
Controller Capacity
Include the module in the S7-1200 limit of three communication modules or processors in total.
Power Arrangement
Decide whether the segment uses a conventional AS-i supply or AS-i Power24V and verify current and decoupling requirements.
Product Overview
Siemens 3RK7243-2AA30-0XB0 is the SIMATIC S7-1200 CM 1243-2 AS-Interface master communication module to AS-i specification V3.0. It exchanges digital and analog process data with the CPU through the backplane bus and is configured in STEP 7 or through the command interface.
Adds one M4-profile AS-Interface master to a compact controller station. Maps field I/O through process-image or peripheral addresses and supports record transfer for additional data. Uses dedicated AS-i, PF, CM, CER and DIAG indicators for commissioning and fault localization.
Key Functions
AS-i Master Integration
Adds one M4-profile AS-Interface master to a compact controller station.
Digital and Analog Data Access
Maps field I/O through process-image or peripheral addresses and supports record transfer for additional data.
Local Status Diagnostics
Uses dedicated AS-i, PF, CM, CER and DIAG indicators for commissioning and fault localization.
Official Specifications
| AS-Interface Specification | V3.0 |
|---|---|
| Master Profile | M4 |
| AS-i Interfaces | 1 |
| Maximum AS-i Transfer Rate | 167,000 bit/s |
| Electrical Connection | Removable screw terminals |
| Voltage Supply | Via the S7-1200 backplane bus |
| Maximum AS-i Profile-Conductor Current | 100 mA at 30 V |
| Maximum Backplane Current | 250 mA |
| Power Loss | 2.9 W |
| Rated Insulation Voltage | 500 V |
| Galvanic Isolation | Provided between the AS-i side and controller electronics |
| Degree of Protection | IP20 |
| Status Indicators | AS-i, PF, CM, CER and DIAG LEDs |
| Maximum Modules per CPU | 3 communication modules or processors in total |
| CPU Data-Exchange Cycle | 10 ms |
| AS-i Cycle at 31 Slave Addresses | Up to 5 ms |
| AS-i Cycle at 62 A/B Addresses | Up to 10 ms |
| Maximum Digital Capacity | 496 DI and 496 DQ per communication module |
| Analog Slave Capacity | 31 standard-address slaves with up to 4 channels each, or 62 A/B-addressed slaves with up to 2 channels each |
| Mechanical Format | 30 x 100 x 75 mm; snap-on mounting to a 35 mm symmetrical DIN rail |
Frequently Asked Questions
How many AS-i slaves can 3RK7243-2AA30-0XB0 serve?
The segment can use up to 31 standard-address analog slaves or 62 A/B-addressed analog slaves within the stated channel and cycle limits.
How is 3RK7243-2AA30-0XB0 configured?
Configure the master in STEP 7 or use the command interface and then match the projected slave list to the installed segment.
Can 3RK7243-2AA30-0XB0 use AS-i Power24V?
Yes, all product versions support that topology when the power, data-decoupling and cable rules are met.
What is the communication cycle for 3RK7243-2AA30-0XB0?
Allow 10 ms for exchange with the CPU plus an AS-i cycle of up to 5 ms for 31 addresses or 10 ms for 62 A/B addresses.
Does 3RK7243-2AA30-0XB0 support ASIsafe directly?
No, the listed master does not provide the ASIsafe protocol function.
How many communication modules can share a CPU with 3RK7243-2AA30-0XB0?
The controller accepts a maximum total of three communication modules or processors, including this master.
What should I verify before replacing 3RK7243-2AA30-0XB0?
Record the slave addresses, I/O mapping, power concept, cycle requirements, terminal wiring and STEP 7 configuration before exchange.