EN
Siemens SIMATIC ET 200S 6ES7151-1CA00-0AB0 IM 151-1 Basic
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC ET 200S • PROFIBUS INTERFACE MODULE
6ES7151-1CA00-0AB0 IM 151-1 Basic
Official Siemens identification and technical data for 6ES7151-1CA00-0AB0, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6ES7151-1CA00-0AB0 |
| Manufacturer | Siemens |
| Platform | SIMATIC ET 200S |
| Product Type | IM 151-1 Basic |
| Official Configuration | IM 151-1 Basic PROFIBUS DP interface, up to 12 connected ET 200S modules and 88-byte input/output address areas |
Exact Identification
Match the complete Siemens article number 6ES7151-1CA00-0AB0 and the installed hardware configuration.
Official Configuration
IM 151-1 Basic PROFIBUS DP interface, up to 12 connected ET 200S modules and 88-byte input/output address areas.
Connection Check
One 9-pin Sub-D RS-485 PROFIBUS DP connection; termination module included in the documented product configuration.
Product Overview
6ES7151-1CA00-0AB0 is officially identified by Siemens as IM 151-1 Basic PROFIBUS DP Interface Module in the SIMATIC ET 200S product range.
Siemens identifies this IM 151-1 Basic module for ET 200S with PROFIBUS DP communication up to 12 Mbit/s and connection for up to 12 power, electronic or motor-starter modules without F modules.
Ordering focus: verify the complete 6ES7151-1CA00-0AB0 article number, installed hardware configuration, connections and Siemens system documentation before replacement.
Key Functions
Model-Specific Configuration
6ES7151-1CA00-0AB0: IM 151-1 Basic PROFIBUS DP interface, up to 12 connected ET 200S modules and 88-byte input/output address areas.
System Connection
One 9-pin Sub-D RS-485 PROFIBUS DP connection; termination module included in the documented product configuration.
Replacement Control
Use the full 6ES7151-1CA00-0AB0 article number and official Siemens documentation to verify the installed configuration before replacement.
Official Specifications
| Manufacturer | Siemens |
| Series | SIMATIC ET 200S |
| Article Number | 6ES7151-1CA00-0AB0 |
| Product Type | IM 151-1 Basic |
| Fieldbus | PROFIBUS DP |
| Maximum Transfer Rate | 12 Mbit/s |
| Maximum Connected Modules | 12 |
| Input Address Area | 88 bytes |
| Output Address Area | 88 bytes |
| Connection | 9-pin Sub-D socket, RS-485 |
| Diagnostics | Supported |
| Typical Power Loss | 1.5 W |
| Dimensions | 45 x 119.5 x 75 mm |
| Approximate Weight | 150 g |
Official source: Siemens Industry Mall product data for 6ES7151-1CA00-0AB0. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
What is Siemens 6ES7151-1CA00-0AB0?
6ES7151-1CA00-0AB0 is the Siemens IM 151-1 Basic PROFIBUS DP Interface Module for the SIMATIC ET 200S product range.
Which Siemens system uses 6ES7151-1CA00-0AB0?
Siemens identifies 6ES7151-1CA00-0AB0 for the SIMATIC ET 200S system.
What is the official configuration of 6ES7151-1CA00-0AB0?
6ES7151-1CA00-0AB0 is officially configured as IM 151-1 Basic PROFIBUS DP interface, up to 12 connected ET 200S modules and 88-byte input/output address areas.
Which connections are specified for 6ES7151-1CA00-0AB0?
6ES7151-1CA00-0AB0 uses One 9-pin Sub-D RS-485 PROFIBUS DP connection; termination module included in the documented product configuration.
What should be checked before installing 6ES7151-1CA00-0AB0?
Before installing 6ES7151-1CA00-0AB0, verify the full article number, installed system, electrical ratings, connectors and official Siemens documentation.
How should 6ES7151-1CA00-0AB0 be matched for replacement?
Match 6ES7151-1CA00-0AB0 by the complete Siemens article number, product family, hardware configuration and documented connection requirements.
Which documentation should be confirmed for 6ES7151-1CA00-0AB0?
Confirm the Siemens Industry Mall product data and the applicable Siemens system manual for 6ES7151-1CA00-0AB0.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7151-1CA00-0AB0
- Match the complete 6ES7151-1CA00-0AB0 article number without shortening the suffix.
- Confirm compatibility with the installed SIMATIC ET 200S product range.
- Verify IM 151-1 Basic PROFIBUS DP interface, up to 12 connected ET 200S modules and 88-byte input/output address areas.
- Confirm One 9-pin Sub-D RS-485 PROFIBUS DP connection; termination module included in the documented product configuration.
