Siemens SIMATIC 6ES7972-0AB01-0XA0 PROFIBUS Diagnostic Repeater
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use in a compatible PROFIBUS DP network.
- Configure a unique DP slave address and matching transfer rate.
- Provide 24 V DC through the correct terminal module.
- Use approved FastConnect cable and shielding practice.
- Retain the planned segment boundaries and termination.
- Install the IP20 unit inside a protected enclosure.
- Restore controller diagnostic blocks and fault-location parameters.
Siemens · SIMATIC S7 / PROFIBUS
6ES7972-0AB01-0XA0 PROFIBUS Diagnostic Repeater
Siemens 6ES7972-0AB01-0XA0 is a SIMATIC diagnostic repeater for PROFIBUS DP. It operates as a standard DP slave, regenerates bus signals and performs online cable diagnostics over supported PROFIBUS data rates.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7972-0AB01-0XA0 |
| Product Type | PROFIBUS DP Diagnostic Repeater |
| Core Function | Repeats PROFIBUS signals while locating and reporting cable faults online |
| Application or Compatible Series | SIMATIC PROFIBUS DP networks |
Network Segmentation
Place the repeater at the planned segment boundary and retain the PROFIBUS topology and terminating arrangement.
Diagnostic Addressing
Preserve the DP slave address, bus rate and controller diagnostic configuration.
FastConnect Wiring
Use approved PROFIBUS FastConnect cable and observe the documented clamping and shielding practice.
Product Overview
Siemens 6ES7972-0AB01-0XA0 is a SIMATIC diagnostic repeater for PROFIBUS DP. It operates as a standard DP slave, regenerates bus signals and performs online cable diagnostics over supported PROFIBUS data rates.
Detects and localizes supported cable faults while the PROFIBUS network remains in operation. Creates electrically separated PROFIBUS segments and restores the bus signal. Reports status and fault information as a standard PROFIBUS DP slave.
Key Functions
Online Cable Diagnostics
Detects and localizes supported cable faults while the PROFIBUS network remains in operation.
Signal Regeneration
Creates electrically separated PROFIBUS segments and restores the bus signal.
Controller Diagnostics
Reports status and fault information as a standard PROFIBUS DP slave.
Official Specifications
| PROFIBUS Role | DP standard slave with repeater and diagnostic functions |
|---|---|
| Supported Transfer Rates | 9.6 kbit/s to 12 Mbit/s |
| Cable Technology | PROFIBUS FastConnect insulation-displacement connection |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 20.4 to 28.8 V DC |
| Typical Power Loss | 4 W |
| Operating Temperature | 0 to +60 degrees C |
| Storage and Transport Temperature | -40 to +70 degrees C |
| Relative Humidity | Up to 95% at 25 degrees C |
| Degree of Protection | IP20 |
| Dimensions | 80 x 125 x 67.5 mm |
| Approximate Weight | 300 g |
| Cable Termination Service Life | Up to 10 clamping cycles |
| Supply Connection | Through the designated terminal module |
Frequently Asked Questions
What faults can 6ES7972-0AB01-0XA0 diagnose online?
The repeater monitors supported PROFIBUS cable faults and provides segment-related diagnostic information.
Which bus rates are supported by 6ES7972-0AB01-0XA0?
Configure any standard PROFIBUS rate from 9.6 kbit/s through 12 Mbit/s that matches the complete network.
Does 6ES7972-0AB01-0XA0 require a PROFIBUS address?
Yes, configure it as a DP slave with a unique address in the controller project.
Which cable system should I use with 6ES7972-0AB01-0XA0?
Use approved PROFIBUS FastConnect cable and follow the specified shielding and insulation-displacement procedure.
Can 6ES7972-0AB01-0XA0 be installed outdoors without an enclosure?
No, the IP20 module requires a protected cabinet environment.
What supply should I provide for 6ES7972-0AB01-0XA0?
Provide 24 V DC within the permissible 20.4 to 28.8 V range through the correct terminal module.
What should I preserve before replacing 6ES7972-0AB01-0XA0?
Record the network topology, slave address, baud rate, cable lengths, termination and controller diagnostics.