Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens glb341 1e openair 10 nm damper actuator-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens GLB341.1E OpenAir 10 Nm Damper Actuator

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
Siemens OpenAir GLB

GLB341.1E OpenAir 10 Nm Damper Actuator

A 10 Nm non-spring-return damper actuator with AC mains supply, a 150-second nominal travel time and manual gear disengagement.

At a Glance

Brand Siemens
Model GLB341.1E
Product Type Rotary air-damper actuator
Core Function Two-position or three-position damper control
Application Ventilation and air-conditioning systems

Bidirectional damper movement

Mains-voltage commands drive the actuator clockwise or counterclockwise for two-position or three-position control.

Manual commissioning

Pressing the gear-train disengagement button permits manual movement, and a set screw limits travel between 0° and 90°.

Position retention

The non-spring-return mechanism remains in its existing position when power is removed.

Product Overview

GLB341.1E drives ventilation dampers with two-position or three-position control and remains in its current position when power is removed.

A direction switch, mechanical position indication and adjustable angle stop support commissioning, while the gear disengagement button permits manual adjustment without driving the motor.

Ordering focus: Match the AC supply, 10 Nm torque requirement, two- or three-position controller and damper-shaft dimensions.
Key Functions

Bidirectional damper movement

Mains-voltage commands drive the actuator clockwise or counterclockwise for two-position or three-position control.

Manual commissioning

Pressing the gear-train disengagement button permits manual movement, and a set screw limits travel between 0° and 90°.

Position retention

The non-spring-return mechanism remains in its existing position when power is removed.

Official Specifications
Supply voltage 100–240 V AC ±10%; permitted 90–264 V AC
Supply frequency 50/60 Hz
Operating consumption 6.0 VA / 2.0 W
Holding consumption 0.9 W
Torque 10 Nm nominal; 16 Nm maximum blocked; 10 Nm minimum holding
Travel angle 90° nominal; 95° ±2° maximum mechanical angle
Nominal travel time 150 s per 90°
Sound pressure level 28 dB(A)
Mechanical life 100,000 full cycles; 5,000,000 partial cycles
Connection cable 0.9 m; 0.75 mm² conductors
Maximum signal-wire length 300 m
Protection IP54 housing; electrical protection class II
Operating temperature −32 to 55 °C
Operating humidity Below 95% RH, non-condensing
Storage temperature −32 to 50 °C
Shaft sizes Round 8–16 mm; square 8–12.8 mm; hexagonal 8–14 mm
Minimum shaft length 20 mm
Maximum actuator weight 0.49 kg without auxiliary switches
Frequently Asked Questions

Can I drive GLB341.1E directly from a 0–10 V modulating controller?

This actuator uses two-position or three-position mains-voltage commands rather than a 0–10 V modulating input.

Will GLB341.1E spring back when power fails?

The actuator remains in its existing position when power is removed.

How can I move GLB341.1E manually during commissioning?

Press the gear-train disengagement button to adjust the actuator manually.

Can the travel of GLB341.1E be limited to less than 90 degrees?

A set screw can restrict the rotation angle within the 0° to 90° range.

How long does GLB341.1E take to travel through 90 degrees?

The nominal travel time for a 90° rotation is 150 seconds.

Does GLB341.1E include auxiliary end switches?

This variant has no auxiliary switches.

Can I fit GLB341.1E to a short damper shaft?

The shaft must provide at least 20 mm of usable length and fall within the permitted shaft-size range.

Compatibility & Ordering Notes
Before ordering GLB341.1E: Match the AC supply, 10 Nm torque requirement, two- or three-position controller and damper-shaft dimensions.

Before installation

  • Use AC mains-voltage control and the correct clockwise or counterclockwise command wiring.
  • Allow at least 20 mm of usable damper-shaft length.
  • Mount indoors in a weather-protected location within the operating temperature and humidity limits.
  • Select a different variant if auxiliary switches, analog position feedback or spring return are required.
Hot Selling Models
Allen-Bradley 800T-PBL46G
48B-gs-M50 19300480549
1608630000
BES02J0 BES516-347-SA2-03
ADVC-32-25-AP
M43-D5/28
XNH-A160-BT 183206 NH00-160A
3/I 2751522
111.10.100
CTI 01 1.879.01
18M-PS-1XB-E4-C
MGN61328
E94ZB30A150A
06217 14bar
27011 MVP12

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.