EN
Siemens 6SE7041-2UL84-1GF0 Inverter Snubber Module SMU4
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Record the full article number from the removed SMU4 and verify the inverter variant.
- Identify the upper SMU position and distinguish it from the lower SML module.
- Follow the Siemens service sequence for the DC-link capacitor assembly and module fixings.
- Have qualified personnel isolate the drive and verify the required spare-part supply route.
SIEMENS DRIVE SPARE • SMU4
6SE7041-2UL84-1GF0 Inverter Snubber Module SMU4
Siemens SMU4 upper snubber module spare for SIMOVERT MASTERDRIVES inverter maintenance.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SE7041-2UL84-1GF0 |
| Product Type | Inverter snubber module SMU4 |
| Core Function | Upper snubber module within the inverter assembly |
| Compatible Series | SIMOVERT MASTERDRIVES inverter assemblies |
Upper module position
SMU denotes Snubber Module Upper in the Siemens inverter maintenance manual.
Service access
The Siemens replacement procedure removes the DC-link capacitor assembly before the snubber modules.
Exact spare ordering
Siemens identifies this SMU4 spare by full article number 6SE7041-2UL84-1GF0.
Product Overview
6SE7041-2UL84-1GF0 is the Siemens SMU4 upper snubber module spare for SIMOVERT MASTERDRIVES inverter service. The SMU is distinct from the lower snubber module, SML, in the drive assembly.
During the Siemens inverter service sequence, the DC-link capacitor assembly is removed to access the snubber modules, their fixing screws are released, and the replacement modules are installed in reverse order. Match the removed component and the complete drive configuration before fitting this spare.
Key Functions
Upper snubber assembly
The SMU occupies the upper snubber module position in the Siemens inverter module arrangement.
Serviced with the DC-link assembly
The inverter maintenance procedure accesses the SMU after removal of the capacitor assembly.
Model-specific spare identification
The complete 6SE7041-2UL84-1GF0 order number identifies the SMU4 replacement article in Siemens Industry Mall.
Official Specifications
| Siemens article number | 6SE7041-2UL84-1GF0 |
|---|---|
| Module designation | SMU4 inverter snubber module |
| SMU meaning | Snubber Module Upper |
| Product system | SIMOVERT MASTERDRIVES inverter spare |
| Service access | DC-link capacitor assembly removed first |
| SMU replacement sequence | Release module fixing screws; install replacement in reverse order |
| Product lifecycle | PM410 product cancellation |
| Cancellation effective date | 6 October 2011 |
| Net weight | 0.300 kg |
| Packaging dimensions | 18 × 34 × 5 cm |
| Packaging quantity | 1 piece |
| Country of origin | Germany |
Frequently Asked Questions
What does SMU mean on 6SE7041-2UL84-1GF0?
SMU means Snubber Module Upper, the upper snubber position in the matching inverter.
Where does 6SE7041-2UL84-1GF0 fit in the drive?
It is the upper snubber module spare in the matching inverter assembly.
How is the SMU reached when replacing 6SE7041-2UL84-1GF0?
Remove the DC-link capacitor assembly before releasing the snubber module fixings.
Is 6SE7041-2UL84-1GF0 the same as an SML module?
No, SMU identifies the upper snubber module while SML identifies the lower snubber module.
What must be matched before installing 6SE7041-2UL84-1GF0?
Match the full article number, installed inverter construction and existing module connection arrangement.
Which fastener torques should I use when fitting 6SE7041-2UL84-1GF0?
Tighten the four M8 module fasteners to 8–10 Nm or the four M6 fasteners to 2.5–5 Nm, and limit the M4 fastener to 1.8 Nm.
How should I reassemble 6SE7041-2UL84-1GF0 after removal?
Refit the new SMU in the reverse order of removal, securing its fasteners before reinstalling the DC-link capacitor assembly.
