Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6gk7443 1rx00 0xe0 simatic net cp 443 1 rna communication processor-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC NET CP 443-1 RNA Communication Processor 6GK7443-1RX00-0XE0

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

SIEMENS · SIMATIC NET S7-400

6GK7443-1RX00-0XE0 SIMATIC NET CP 443-1 RNA Communication Processor

The CP 443-1 RNA provides one standard 10/100 Mbit/s Ethernet port and two 100 Mbit/s PRP/RNA ports with S7 and open communication services.

At a Glance

Brand Siemens
Model 6GK7443-1RX00-0XE0
Product Type redundant-network Industrial Ethernet communication processor
Core Function Connects an S7-400 station to standard Ethernet and duplicated PRP/RNA networks
Application or Compatible Series S7-400 systems requiring Parallel Redundancy Protocol communication

Exact Identification

Match 6GK7443-1RX00-0XE0 character by character and confirm the complete SIMATIC NET CP 443-1 RNA Communication Processor designation.

Interface Arrangement

Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.

Configuration Check

Preserve the approved engineering project, network parameters and application data used by the installed system.

Product Overview

The CP 443-1 RNA provides one standard 10/100 Mbit/s Ethernet port and two 100 Mbit/s PRP/RNA ports with S7 and open communication services.

Two PRP/RNA ports connect the processor to duplicated Ethernet paths. Controller, H-system and transport protocols share the same module. Access lists, web diagnostics and SNMP support controlled maintenance.

Ordering focus: confirm the CP 443-1 RNA article number, rack slot, PRP network design, three Ethernet connections and STEP 7 communication configuration.
Key Functions

Seamless Redundant Networking

Two PRP/RNA ports connect the processor to duplicated Ethernet paths.

S7 and Open Communication

Controller, H-system and transport protocols share the same module.

Integrated Security and Diagnostics

Access lists, web diagnostics and SNMP support controlled maintenance.

Official Specifications
Industrial Ethernet Interfaces 3
Standard Ethernet Port 1 x 10/100 Mbit/s RJ45
Redundant Network Ports 2 x 100 Mbit/s RJ45
Redundancy Protocol PRP/RNA
Ethernet Interface Connector 1 x RJ-45 jack
Ethernet Transmission Speed 10 / 100 Mbps, half duplex or full duplex
RNA Interface Connector 2 x RJ-45 jacks
RNA Transmission Speed 100 Mbps full duplex
Power Supply Via S7 backplane bus, 5 V
Backplane Current Consumption 2 A
Power Dissipation 10 W
Operating Temperature 0 °C to +60 °C
Storage and Transport Temperature -40 °C to +70 °C
Relative Humidity ≤ 95% at 25 °C, no condensation
Operating Altitude ≤ 2,000 m above sea level
Module Format Compact module for S7-400, single width
Degree of Protection IP20
Module Dimensions and Weight 25 x 290 x 210 mm (W x H x D); approx. 700 g
Installation Mounting in an S7-400 rack
Network Management SNMPv1
Frequently Asked Questions

Which Ethernet ports are provided on 6GK7443-1RX00-0XE0?

It has one standard 10/100 Mbit/s RJ45 port and two 100 Mbit/s redundant-network ports.

What redundancy method does 6GK7443-1RX00-0XE0 use?

The two dedicated network paths use Parallel Redundancy Protocol within the RNA configuration.

Can 6GK7443-1RX00-0XE0 carry S7 and H communication?

Yes; both controller services are supported alongside open communication.

Which transport protocols are available on 6GK7443-1RX00-0XE0?

ISO, ISO-on-TCP, TCP and UDP are supported.

Does 6GK7443-1RX00-0XE0 provide web-based diagnostics?

Yes; web diagnostics and SNMPv1 network management are available.

Can access to 6GK7443-1RX00-0XE0 be restricted by IP address?

Yes; an IP access control list is supported.

What should be checked when commissioning 6GK7443-1RX00-0XE0?

Verify the rack slot, duplicated network paths, IP parameters, PRP configuration and STEP 7 project.

Compatibility & Ordering Notes
Before ordering 6GK7443-1RX00-0XE0: confirm the CP 443-1 RNA article number, rack slot, PRP network design, three Ethernet connections and STEP 7 communication configuration.

Compatibility Checklist

  • Use it in a SIMATIC S7-400 rack approved for the CP 443-1 RNA module.
  • Connect the two redundant ports to the correct duplicated LAN paths and keep the standard port separate as engineered.
  • Restore the same IP parameters, access list and communication connections from the validated project.
Hot Selling Models
P2RF-05-S
XS4 P18MB230
NEBL-M8G4-E-1-N-M8G4
003H6903
3RV1011-1JA25
6ES7321-7BH01-0AB0
3VE1010-2B
LZX:RT3B4L24 LZX:RT78626
6ES7924-0CA00-0A
3RH1131-1BE40
3RH1140-1AB00
3RT2016-1BB42 3RH2911-1FA40 3RT2916-1BB00
RSSW-RKSW451-1M
PT1.5/S/1P
Allen-Bradley 1492-SP 1492-SP3C060

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.