EN
Siemens SCALANCE PS598-1 Power Supply 6GK5598-1AA00-3AA0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SCALANCE X-500 - 300 W industrial Ethernet switch power supply
6GK5598-1AA00-3AA0 SCALANCE PS598-1 Power Supply
Siemens specifies the PS598-1 as a 300 W wide-range AC power supply with isolated 24 V DC output for SCALANCE X-500 systems.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK5598-1AA00-3AA0 |
| Product Type | 300 W industrial Ethernet switch power supply |
| Core Function | Provides isolated 24 V DC power for SCALANCE X-500 rack switches |
| Application or Compatible Series | SCALANCE XR-500 industrial Ethernet installations |
Product Overview
Siemens specifies the PS598-1 as a 300 W wide-range AC power supply with isolated 24 V DC output for SCALANCE X-500 systems.
Official Siemens documentation identifies the product for SCALANCE XR-500 industrial Ethernet installations. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Wide-Range AC Input
The input accepts 85 to 264 V AC at 47 to 63 Hz.
High-Current DC Output
A regulated 24 V DC output supplies up to 12.5 A.
Parallel Operation
Two units can be connected in parallel to increase available power.
Official Specifications
| Input Type | Single-phase AC |
|---|---|
| Rated Input Voltage | 230 V AC |
| Input Voltage Range | 85 to 264 V AC |
| Input Frequency | 47 to 63 Hz |
| Input Current at 230 V | 1.8 A |
| Maximum Inrush Current | 40 A at 25 °C |
| Mains Buffering | 16 ms at rated output |
| Output Type | Controlled, isolated DC |
| Rated Output Voltage | 24 V DC |
| Output Current Range | 0 to 12.5 A |
| Rated Active Power | 300 W |
| Efficiency | 87% |
| Typical Power Loss | 39 W |
| Output Overshoot | Below 5% |
| Maximum Startup Delay | 1.5 s |
| Maximum Voltage Rise Time | 15 ms |
| Output Voltage Tolerance | 2% |
| Maximum Ripple | 0.36 V |
| Parallel Connection | 2 units for power increase |
| Input Fuse | Replaceable |
Frequently Asked Questions
What AC input range can 6GK5598-1AA00-3AA0 accept?
The wide-range input accepts 85 to 264 V AC at 47 to 63 Hz.
How much 24 V DC current can 6GK5598-1AA00-3AA0 supply?
The regulated output can deliver up to 12.5 A.
What output power is available from 6GK5598-1AA00-3AA0?
The rated active output power is 300 W.
Can two units of 6GK5598-1AA00-3AA0 operate in parallel?
Yes, two supplies can be paralleled to increase available power.
What mains interruption can 6GK5598-1AA00-3AA0 bridge at rated load?
The supply provides 16 ms of mains buffering at rated output.
What inrush current should upstream protection allow for with 6GK5598-1AA00-3AA0?
The maximum inrush current is 40 A at 25 °C.
May 6GK5598-1AA00-3AA0 be connected or removed while energized?
No, isolate the power before connecting or disconnecting the unit.
Compatibility & Ordering Notes
Compatibility Checklist for 6GK5598-1AA00-3AA0
- Match SCALANCE PS598-1 Power Supply and the full article number character by character.
- Verify rated input voltage: 230 V AC.
- Confirm maximum inrush current: 40 A at 25 °C.
- Preserve the approved settings and connection records used in SCALANCE XR-500 industrial Ethernet installations.
