Siemens 6GK1905-0AE00 SIMATIC NET SpliTConnect PROFIBUS PA Terminator
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use this version only outside hazardous areas.
- Replace the Tap contacting screw with the terminating accessory.
- Order couplers or M12 outlets separately when those connection functions are required.
- Keep the assembled component within the specified environmental range.
6GK1905-0AE00 SIMATIC NET SpliTConnect PROFIBUS PA Terminator
A non-Ex SpliTConnect terminator for PROFIBUS PA segments, supplied in a manufacturer pack of five units.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1905-0AE00 |
| Product Type | Fieldbus termination accessory |
| Core Function | Electrically terminating a bus segment |
| Application | Non-hazardous PROFIBUS PA installations |
PA segment termination
The accessory terminates a PROFIBUS PA bus segment.
Tap integration
It replaces the contacting screw of a SpliTConnect Tap.
Non-Ex selection
This version is not approved for use in a hazardous area.
Product Overview
6GK1905-0AE00 provides electrical termination for a PROFIBUS PA segment in the SpliTConnect system. Installing the terminator in place of the Tap contacting screw converts the Tap into a bus terminating element.
This is the non-Ex version and must be selected for the corresponding installation area. It is distinct from the SpliTConnect coupler and M12 outlet, which perform different connection functions in the same system.
Key Functions
Terminate the PA segment
The terminator provides the electrical bus-segment termination function.
Use the existing Tap arrangement
The accessory replaces the contacting screw on a SpliTConnect Tap.
Retain the correct system component
The terminator complements the Tap, coupler and field-device outlets within the SpliTConnect assembly.
Official Specifications
| PROFIBUS PA transfer rate | 31.25 kbit/s |
|---|---|
| Operation, storage and transport temperature | −40 to +85 °C |
| Ingress protection | IP67 |
| Material property | Silicon-free |
| Fieldbus physical-layer standard | IEC 61158-2 |
| Insulation-piercing contact endurance | 4 contacting cycles |
| SpliTConnect system shock resistance | 30 g for 11 ms |
| SpliTConnect system vibration resistance | 10 to 58 Hz at 0.075 mm amplitude |
Frequently Asked Questions
May I install 6GK1905-0AE00 in a hazardous area?
The non-Ex terminator is not permitted for hazardous-area use.
Where is 6GK1905-0AE00 fitted on a SpliTConnect Tap?
It replaces the contacting screw so that the Tap serves as a bus terminating element.
How many terminators are in one manufacturer pack of 6GK1905-0AE00?
A manufacturer pack contains five units.
What PA transmission rate applies to a segment using 6GK1905-0AE00?
The PROFIBUS PA transfer rate is 31.25 kbit/s.
Can I store 6GK1905-0AE00 under the same temperature limits as operation?
Operation, storage and transport share the specified range of −40 to +85 °C.
Which ingress-protection level is specified for 6GK1905-0AE00?
The terminator has an IP67 protection rating.
Does 6GK1905-0AE00 provide the M12 field-device outlet function?
The terminator ends the bus segment, while the separately selected SpliTConnect M12 outlet provides the field-device connection.