EN
Siemens SIMATIC C7 6ES7626-2DG04-0AE3 C7-626 P/DP Complete Unit
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7626-2DG04-0AE3 C7-626/P DP complete unit
Panel-mounted SIMATIC C7 unit combining controller, operator and distributed-I/O functions.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6ES7626-2DG04-0AE3 |
| Product Type | C7-626/P DP complete unit |
| Core Function | Integrated control, local operation and PROFIBUS DP communication |
| Application / Compatible Series | SIMATIC C7 compact machine-control systems |
Exact Identification
Match the complete article number and installed hardware revision.
System Fit
Confirm the platform, interfaces and engineering environment.
Configuration Check
Check connectors, mounting and required accessories.
Product Overview
6ES7626-2DG04-0AE3 belongs to the Siemens C7-626/P DP family of compact complete units. It combines controller and operator functions with integrated digital I/O for panel-based machine automation.
The C7-626/P DP hardware provides 16 digital inputs and 16 digital outputs. Its 24 V DC field signals, PROFIBUS DP capability and S7 routing support allow the device to coordinate local operation with distributed automation components.
Key Functions
Controller Designation
6ES7626-2DG04-0AE3: C7-626 P/DP.
System Family
6ES7626-2DG04-0AE3: SIMATIC C7.
Device Architecture
6ES7626-2DG04-0AE3: PLC and operator unit in one housing.
Official Specifications
| Digital Inputs | 16 |
|---|---|
| Input Nominal Voltage | 24 V DC |
| Signal 1 Input Range | 11 to 30 V |
| Signal 0 Input Range | -3 to 5 V |
| Signal 1 Input Current | 6 to 11.5 mA |
| Input Delay | 1.2 to 4.8 ms |
| Input Isolation | Optocoupler, group of 16 |
| Input Standard | EN 61131-2, Type 2 |
| Digital Outputs | 16 |
| Output Load Voltage | 24 V DC |
| Output Current per Channel | 0.5 A |
| Lamp Load | 5 W maximum |
| Output Isolation | Optocoupler, groups of 8 |
| Output Group Current | 4 A at 20 °C; 2 A at 45 °C |
| Output Short-Circuit Protection | Electronically timed |
| Unshielded Cable Length | 600 m maximum |
| Shielded Cable Length | 1,000 m maximum |
| S7 Routing | Supported |
| Load Memory | Integrated |
| Non-Retain Support | No |
Frequently Asked Questions
Which integrated I/O is available on 6ES7626-2DG04-0AE3?
The complete unit provides 16 digital inputs and 16 digital outputs.
What input-voltage range represents a logic 1 on 6ES7626-2DG04-0AE3?
The digital inputs accept 11 to 30 V for a logic 1 with a nominal 24 V DC supply.
How much current can each output of 6ES7626-2DG04-0AE3 switch?
Each digital output is rated for 0.5 A under the documented load conditions.
Which PROFIBUS function should be checked when commissioning 6ES7626-2DG04-0AE3?
Verify the DP address, bus parameters, termination and the configured distributed-I/O stations before startup.
Can 6ES7626-2DG04-0AE3 route S7 communication?
Yes. The exact C7 order-number family is listed as supporting S7 routing.
What panel work is required before replacing 6ES7626-2DG04-0AE3?
Compare the installed cutout, connector positions and wiring assignments before removing the existing unit.
Which output protection detail matters when wiring 6ES7626-2DG04-0AE3?
The digital outputs use electronically timed short-circuit protection and are galvanically isolated in groups of eight.
Compatibility & Ordering Notes
- Record the PROFIBUS address and project configuration before replacement.
- Check the 24 V DC field supply, connector pinout and digital-I/O group loading.
- Compare the panel cutout and mounting hardware before installation.
