Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7531 7lh00 0ab0 s7 1500 ai 16xu ba-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC S7-1500 6ES7531-7LH00-0AB0 AI 16xU BA

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC S7-1500

6ES7531-7LH00-0AB0 AI 16xU BA Analog Input Module

Siemens 6ES7531-7LH00-0AB0 is the SIMATIC S7-1500 AI 16xU BA analog input module for sixteen voltage channels, providing 16-bit conversion, diagnostics and hardware limit alarms.

At a Glance

Brand Siemens
Model 6ES7531-7LH00-0AB0
Product Type Sixteen-channel voltage analog input module
Core Function Converts sixteen voltage signals with 16-bit resolution
Application or Compatible Series SIMATIC S7-1500 and ET 200MP systems

Range Planning

Assign a supported voltage range and integration time to every connected sensor channel.

Front Connector

Order the required screw-terminal or push-in front connector separately and retain the supplied shielding parts.

Signal Quality

Coordinate shielding, cable length, smoothing and interference-frequency settings with the application.

Product Overview

Siemens 6ES7531-7LH00-0AB0 is the SIMATIC S7-1500 AI 16xU BA analog input module for sixteen voltage channels, providing 16-bit conversion, diagnostics and hardware limit alarms.

Sixteen voltage channels are organized as one channel group for compact analog measurement. Integration time, conversion time and smoothing can be selected to balance response and interference rejection. Wire-break monitoring for the 1 to 5 V range and overflow or underflow diagnostics support commissioning.

Ordering focus: verify every sensor voltage range, integration and smoothing settings, front-connector type, shield termination and the installed TIA Portal hardware catalog.
Key Functions

High-Density Voltage Acquisition

Sixteen voltage channels are organized as one channel group for compact analog measurement.

Configurable Conversion

Integration time, conversion time and smoothing can be selected to balance response and interference rejection.

Channel Diagnostics

Wire-break monitoring for the 1 to 5 V range and overflow or underflow diagnostics support commissioning.

Official Specifications
Hardware Function Status FS01 or later
Firmware Version V1.0.0
TIA Portal Integration V16 with HSP 312 or V17 and higher
Backplane-Bus Power Consumption 0.85 W
Typical Power Loss 0.75 W
Supported Voltage Ranges 1 to 5 V; plus or minus 1 V; plus or minus 5 V; plus or minus 10 V
Input Resistance 10 MΩ for supported voltage ranges
Maximum Permissible Input Voltage 12 V continuously; 30 V for no more than 1 s
Maximum Shielded Cable Length 200 m
Measurement Principle Integrating conversion
Maximum Digital Resolution 16 bit including sign and overrange
Selectable Integration Times 2.5, 16.67, 20 or 100 ms
Basic Conversion Times 10, 24, 27 or 107 ms
Additional Wire-Break Conversion Time 4 ms for 1 to 5 V measurement
Selectable Interference Suppression 400, 60, 50 or 10 Hz
Linearity Error Plus or minus 0.1 percent of input range
Temperature Error Plus or minus 0.006 percent per kelvin
Maximum Crosstalk -50 dB
Voltage Operational Error Limit Plus or minus 0.5 percent over the full temperature range
Maximum Common-Mode Voltage 4 V
Frequently Asked Questions

Which sensors can I connect to 6ES7531-7LH00-0AB0?

Connect voltage-output sensors that operate within one of the supported unipolar or bipolar input ranges.

How should I reduce mains-frequency interference on 6ES7531-7LH00-0AB0?

Select the integration setting that corresponds to the interference frequency and use correctly terminated shielding.

Does 6ES7531-7LH00-0AB0 detect a broken signal wire?

Wire-break diagnostics are available when a channel is configured for the one-to-five-volt range.

Which front connector is needed for 6ES7531-7LH00-0AB0?

Use a compatible forty-pole screw-terminal or push-in front connector ordered separately.

Can I change parameters while 6ES7531-7LH00-0AB0 is operating?

The module permits reparameterization in RUN when the controller configuration supports the change.

What cable distance is permitted for 6ES7531-7LH00-0AB0 inputs?

A shielded sensor cable may be up to two hundred metres under the specified installation conditions.

How do I protect 6ES7531-7LH00-0AB0 from excessive input voltage?

Keep every continuous input below twelve volts and avoid transients above the stated short-duration limit.

Compatibility & Ordering Notes
Before ordering 6ES7531-7LH00-0AB0: verify every sensor voltage range, integration and smoothing settings, front-connector type, shield termination and the installed TIA Portal hardware catalog.

Compatibility Checklist

  • Confirm use in a SIMATIC S7-1500 or ET 200MP station with the correct hardware catalog entry.
  • Order the matching front connector because it is not included with the module.
  • Reproduce the existing channel ranges, alarm limits and conversion settings before commissioning.
Hot Selling Models
TMAP16.32
200PRO 6ES7194-4DA00-0AA0
3RV2011-0JA15
PXL-C6/3
9342.410
DIL00BM-G
T4V7H335ST-AS-U180
LC1D12BL
6ES5300-5CA11
AE93000
WLL160-F420 0027S
TA32750C500
6ES7492-1CL00-0AA0
SAC-2P-MSB-FSB SCO/910
504.640AB3B

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.