Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7332 5rd00 0ab0 sm332 ex analog output-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC S7-300 6ES7332-5RD00-0AB0 SM 332 Ex Analog Output

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC S7-300

6ES7332-5RD00-0AB0 SM 332 Ex Four-Channel Analog Output Module

Siemens 6ES7332-5RD00-0AB0 is the SIMATIC S7-300 SM 332 Ex analog output module with four isolated 0/4 to 20 mA channels, diagnostics, PTB testing and a 20-pole front connection.

At a Glance

Brand Siemens
Model 6ES7332-5RD00-0AB0
Product Type Four-channel isolated current output module for hazardous-area signals
Core Function Generates 0/4 to 20 mA analog signals with channel diagnostics
Application or Compatible Series SIMATIC S7-300 and ET 200M systems with Ex(i) field circuits

Ex Circuit Review

Confirm the hazardous-area protection concept, barriers, field devices and permitted circuit data.

Current Range

Copy the selected 0 to 20 mA or 4 to 20 mA range for each output channel.

Diagnostic Wiring

Preserve the twenty-pole connector, actuator-cable continuity and channel diagnostic parameters.

Product Overview

Siemens 6ES7332-5RD00-0AB0 is the SIMATIC S7-300 SM 332 Ex analog output module with four isolated 0/4 to 20 mA channels, diagnostics, PTB testing and a 20-pole front connection.

The module is designed for intrinsically safe analog signals from hazardous areas. Four outputs provide selectable 0 to 20 mA or 4 to 20 mA process commands. Overrange and actuator-cable wire-break monitoring are available with channel fault indication.

Ordering focus: verify the exact Ex analog-output article, intrinsic-safety design, twenty-pole connector, 24 V supply, channel current ranges, field loads, cable shielding and diagnostics.
Key Functions

Hazardous-Area Output

The module is designed for intrinsically safe analog signals from hazardous areas.

Four Current Channels

Four outputs provide selectable 0 to 20 mA or 4 to 20 mA process commands.

Channel Diagnostics

Overrange and actuator-cable wire-break monitoring are available with channel fault indication.

Official Specifications
Number of Analog Outputs 4
Output Signal Ranges 0 to 20 mA and 4 to 20 mA
Rated Load Voltage 24 V DC
Reverse-Polarity Protection Available
Maximum No-Load Current from L+ 200 mA
Maximum Backplane Current at 5 V DC 80 mA
Typical Power Loss 4 W
Maximum Current-Output No-Load Voltage 14 V
Maximum Current-Load Impedance 500 Ω
Maximum Shielded Cable Length 200 m
Maximum Resolution 15 bit including sign
Operational Error over Temperature Range ±0.55% of output range
Basic Error at 25 °C ±0.2% of output range
Diagnostic Function Available
Overrange Diagnosis Available
Actuator-Cable Wire-Break Diagnosis Available
Group Fault Indicator Red SF LED
Channel Fault Indication Red F LED
Hazardous-Area Protection Ex(i) module
Required Front Connector 20-pole
Frequently Asked Questions

Which current ranges can I configure on 6ES7332-5RD00-0AB0?

Select either zero to twenty milliamperes or four to twenty milliamperes for each output.

Is 6ES7332-5RD00-0AB0 intended for intrinsically safe circuits?

Yes, it is designed for analog output signals used with the approved hazardous-area circuit arrangement.

What load limit applies to 6ES7332-5RD00-0AB0?

Keep the connected current-loop load at or below five hundred ohms.

How can 6ES7332-5RD00-0AB0 detect a disconnected actuator cable?

Enable the available channel diagnostics so a wire break is reported through the fault indication.

Which connector is required by 6ES7332-5RD00-0AB0?

Use the specified twenty-pole front connector with the verified terminal assignment.

What should I compare before exchanging 6ES7332-5RD00-0AB0?

Compare the complete article, channel ranges, field-circuit approval, wiring, load and diagnostics.

What should I inspect if 6ES7332-5RD00-0AB0 reports overrange?

Check the configured range, loop wiring, field device, load resistance and power supply.

Compatibility & Ordering Notes
Before ordering 6ES7332-5RD00-0AB0: verify the exact Ex analog-output article, intrinsic-safety design, twenty-pole connector, 24 V supply, channel current ranges, field loads, cable shielding and diagnostics.

Compatibility Checklist

  • Confirm the existing S7-300 or ET 200M configuration contains this exact Ex output module.
  • Validate the complete intrinsic-safety circuit and field-device data before installation.
  • Retain all channel ranges, connector wiring, shields and diagnostic parameters.
Hot Selling Models
SEA41.2
0354760000
492-CB1G010
8A615.3
ASBSV8/LED-5
5SX23C10
1200661036
3RV2011-1DA20 3RV2901-2F
3RV2011-0HA15
03369.000
CG8.A004.FT2.F778 70009518
7000-12241-7320750
TKHM-W-10/LP 201710
PLC-BSC-24VDC/1IC/ACT
3VU1300-1MN00

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.