Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7332 5hd01 0ab0 simatic s7 300 sm 332 four channel analog output module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7332-5HD01-0AB0 SIMATIC S7-300 SM 332 Four-Channel Analog Output Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC S7-300

6ES7332-5HD01-0AB0 SIMATIC S7-300 SM 332 Four-Channel Analog Output Module

SM 332 with four isolated-to-backplane voltage/current output channels, configurable ranges and a 20-pin front connector.

At a Glance

Brand Siemens
Model 6ES7332-5HD01-0AB0
Product Type Analog output signal module
Core Function Generation of voltage and current setpoints
Application S7-300 and compatible active-backplane stations

Selectable analog setpoints

Each output supports the specified voltage or current measuring ranges.

Voltage-line compensation

Four-wire voltage connections compensate for the voltage drop in the load conductors.

Configured fault response

Diagnostic functions and substitute values support a defined response to station or output faults.

Product Overview

6ES7332-5HD01-0AB0 generates four analog output signals for voltage or current-controlled field equipment.

The SM 332 supports selectable unipolar and bipolar ranges, configurable substitute values and diagnostics, with voltage compensation available through four-wire connections.

Ordering focus: Match the voltage or current range, load impedance, 20-pin connector and station requirements for any active-backplane operation.
Key Functions

Selectable analog setpoints

Each output supports the specified voltage or current measuring ranges.

Voltage-line compensation

Four-wire voltage connections compensate for the voltage drop in the load conductors.

Configured fault response

Diagnostic functions and substitute values support a defined response to station or output faults.

Official Specifications
Output channel count 4 voltage/current channels
Voltage ranges 0–10 V; 1–5 V; ±10 V
Current ranges 0–20 mA; 4–20 mA; ±20 mA
Load supply 24 V DC; reverse-polarity protection
Load-supply current 240 mA maximum without load
5 V backplane current 60 mA maximum
Power loss 3 W typical
Voltage-output wiring 4-wire connection
Current-output wiring 2-wire connection
Voltage-load limits At least 1 kΩ; up to 1 µF capacitance
Current-load limits Up to 500 Ω; up to 10 mH inductance
Voltage-output short-circuit current 25 mA maximum
Current-output no-load voltage 18 V maximum
Maximum shielded cable 200 m
Resolution 12 bits for 0–10 V and 0–20 mA; 11 bits plus sign for the other listed ranges
Conversion time 0.8 ms per channel
Operational error limit ±0.5% voltage; ±0.6% current
Isolation From backplane bus and load supply; no channel-to-channel isolation
Front connector 20-pin
Dimensions and mass 40 × 125 × 117 mm (W × H × D); approximately 220 g
Frequently Asked Questions

How can I compensate a voltage lead drop with 6ES7332-5HD01-0AB0?

Use the four-wire voltage-output connection to sense the voltage at the load.

What maximum load resistance may I use for a current output of 6ES7332-5HD01-0AB0?

The maximum permitted load resistance is 500 Ω.

Are the four channels of 6ES7332-5HD01-0AB0 isolated from one another?

The channels share their output reference and are isolated from the backplane bus and load supply rather than from each other.

Does every range on 6ES7332-5HD01-0AB0 use the same resolution?

The 0–10 V and 0–20 mA ranges use twelve bits while the other listed ranges use eleven bits plus sign.

What voltage can appear on an unloaded current output of 6ES7332-5HD01-0AB0?

The specified maximum no-load voltage is 18 V.

What connector is needed for field wiring to 6ES7332-5HD01-0AB0?

Use the matching 20-pin front connector.

Can 6ES7332-5HD01-0AB0 be inserted during operation in an active-backplane station?

The stated hot-insertion function applies when the module is used with a suitable active backplane.

Compatibility & Ordering Notes
Before ordering 6ES7332-5HD01-0AB0: Match the voltage or current range, load impedance, 20-pin connector and station requirements for any active-backplane operation.

Before installation

  • Configure the intended voltage or current range for every channel.
  • Select the matching 20-pin front connector and shielded signal cables.
  • Check resistance, capacitance and inductance against the selected output mode.
  • Use hot insertion only in the supported active-backplane station arrangement.
Hot Selling Models
7000-46041-8020400
287109 ES110 960287109
3RU1116-1EC1
ZR25602z
21220100 9041540
6SE6400-4BD11-0AA0
CPV10-M1H-2X3-GLS-M7
LUB12 LUCA12BL
DNC-32-125-PPV-A
783-604 51135424
3RT2024-1BM44
SC-E4/G SZ-A11/T + SZ-Z36
3RA1110-1JD16-1BB4 3RT1916-1BB00
PN63 DN25 1.4408
1418000000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.