Siemens 6ES7253-1AA22-0XA0 SIMATIC S7-200 EM 253 Positioning Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Respect the CPU-specific EM 253 module count.
- Match the external drive pulse interface and keep its shielded cable within 10 m.
- Keep the shielded ZP connection within 10 m.
- Assign STP, RPS and both travel-limit inputs to the machine motion design.
6ES7253-1AA22-0XA0 SIMATIC S7-200 EM 253 Positioning Module
EM 253 generates positioning pulses up to 200 kHz for a stepper or servo drive, with dedicated stop, reference, limit and zero-pulse inputs.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7253-1AA22-0XA0 |
| Product Type | Positioning expansion module |
| Core Function | Open-loop motion command generation |
| Application | S7-200 stepper and servo applications |
Positioning pulses
The differential drive interface supports pulse rates up to 200 kHz.
Machine reference inputs
STP, RPS, LMT+, LMT− and ZP inputs connect motion-related sensors.
Micro/WIN engineering
The module is configured for its positioning task through the S7-200 engineering environment.
Product Overview
6ES7253-1AA22-0XA0 is the EM 253 positioning expansion module for SIMATIC S7-200 controllers. It supplies open-loop positioning commands to a compatible stepper or servo drive rather than providing the motor power stage.
Dedicated motion inputs cover stopping, reference-point sensing, positive and negative travel limits and the drive zero pulse, with different input timing requirements for the zero-pulse channel.
Key Functions
High-rate pulse command
The differential drive output produces positioning pulses at up to 200 kHz over a shielded cable up to 10 m.
Reference and travel-limit handling
Five inputs provide STP, RPS, LMT+, LMT− and ZP functions, with configurable filtering for the regular motion inputs.
CPU-dependent expansion
The supported expansion count reaches five EM 253 modules on CPU 226 or 226XM, three on CPU 224 and one on CPU 222.
Official Specifications
| Maximum pulse frequency | 200 kHz |
|---|---|
| Motion inputs | 5: STP, RPS, LMT+, LMT− and ZP |
| Rated input voltage | 24 V DC |
| Input ON thresholds | 15 V for STP, RPS and LMT; 3 V for ZP |
| Input OFF thresholds | 5 V for STP, RPS and LMT; 1 V for ZP |
| Regular-input filter delay | Configurable from 0.2 to 12.8 ms |
| Minimum ZP input delay | 2 µs |
| Regular-input cable length | 100 m shielded; 30 m unshielded |
| Maximum shielded ZP cable | 10 m |
| Maximum two-wire sensor leakage | 1 mA |
| Differential output voltage | Minimum 2.8 V with a 200 Ω load |
| Maximum drive-output current | 50 mA |
| Maximum shielded drive cable | 10 m |
| Maximum backplane current | 190 mA at 5 V DC |
| Typical power loss | 2.5 W |
| Permitted potential difference | 500 V AC |
| Dimensions (W × H × D) | 71.2 × 80 × 62 mm |
| Approximate weight | 190 g |
Frequently Asked Questions
Can 6ES7253-1AA22-0XA0 power the motor directly?
The module generates positioning commands for an external stepper or servo drive and does not provide the motor power stage.
How many EM 253 modules can a CPU 224 use with 6ES7253-1AA22-0XA0?
A CPU 224 supports up to three EM 253 positioning modules.
Why does the ZP cable for 6ES7253-1AA22-0XA0 need a shorter route than ordinary limit inputs?
The ZP connection has a maximum shielded length of 10 m, compared with 100 m for the shielded regular motion inputs.
Can I use 6ES7253-1AA22-0XA0 with a drive requiring 200 kHz positioning pulses?
The drive interface supports a maximum pulse frequency of 200 kHz.
Which signals should I wire to the five inputs of 6ES7253-1AA22-0XA0?
The five inputs serve stop, reference-point switch, positive travel limit, negative travel limit and zero-pulse functions.
Can I apply the regular input filter settings to the ZP input of 6ES7253-1AA22-0XA0?
The regular STP, RPS and LMT inputs have a configurable 0.2 to 12.8 ms delay, while the ZP input has a minimum delay of 2 µs.
Which engineering environment should I use with 6ES7253-1AA22-0XA0?
The positioning module is configured within the STEP 7 Micro/WIN environment for S7-200.