Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7231 7pb22 0xa8 simatic s7 200 cn em 231 two channel rtd module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7231-7PB22-0XA8 SIMATIC S7-200 CN EM 231 Two-Channel RTD Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC S7-200 CN

6ES7231-7PB22-0XA8 SIMATIC S7-200 CN EM 231 Two-Channel RTD Module

A two-input RTD module with selectable sensor characteristics, two-/three-/four-wire connections and temperature values in 0.1-degree units.

At a Glance

Brand Siemens
Model 6ES7231-7PB22-0XA8
Product Type RTD input expansion module
Core Function Acquiring resistance-temperature signals
Application S7-200 CN CPU expansion

Two RTD channels

The selected sensor type applies to both measurement channels.

DIP-switch setup

Sensor type, wiring, temperature scale and error direction are selected on the module.

Direct engineering values

Temperature is represented in 0.1-degree units and resistance is scaled to 27648.

Product Overview

6ES7231-7PB22-0XA8 connects two resistance-temperature sensors to an S7-200 CN controller. Platinum, nickel and copper RTD characteristics are selectable, together with three resistance ranges.

The module uses DIP switches for sensor and wiring selection and supplies temperature or error information as signed data words. Its status indications distinguish missing user power from open-wire, out-of-range and diagnostic conditions.

Ordering focus: Select one common sensor characteristic for both channels, match the lead arrangement and read the data at the module update rate.
Key Functions

Measure RTDs directly

The inputs support platinum, nickel and Cu10 sensor characteristics and resistance measurement.

Apply the selected connection scheme

Two-wire, three-wire and four-wire arrangements are selected with the module DIP switches.

Expose sensor faults

Range status, data-word error values and local LEDs support detection of wiring and supply faults.

Official Specifications
RTD input channels 2
Selectable RTD families Pt100/200/500/1000/10000; Ni100/120/1000; Cu10, with selectable characteristics
Resistance ranges 150 Ω, 300 Ω or 600 Ω full scale
User supply range 20.4–28.8 V DC
5 V bus requirement 87 mA
24 V supply requirement 60 mA
Power dissipation 1.8 W
Conversion principle Sigma-delta
Temperature representation 0.1 °C or 0.1 °F per count
Resistance representation 15 bit plus sign; nominal range 0–27648
Module update time 405 ms; 700 ms for Pt10000
Maximum sensor cable length 100 m
Maximum wire-loop resistance 20 Ω; 2.7 Ω for Cu10
Maximum sensor dissipation 1 mW
Minimum input impedance 10 MΩ
Maximum input voltage 30 V DC at sense terminals; 5 V DC at source terminals
Resistance accuracy and repeatability Basic error 0.1% full scale; repeatability 0.05% full scale
Interference suppression 85 dB at 50, 60 and 400 Hz
Dimensions 71.2 × 80 × 62 mm (W × H × D)
Weight 210 g
Frequently Asked Questions

Can I mix different RTD types on the two inputs of 6ES7231-7PB22-0XA8?

Both RTDs must use the same selected sensor type.

When do changed DIP-switch settings take effect on 6ES7231-7PB22-0XA8?

Power-cycle the PLC or the user 24 V supply after changing the switches.

How do I interpret a temperature value of 1002 from 6ES7231-7PB22-0XA8?

The value represents 100.2 degrees in the selected Celsius or Fahrenheit scale.

Should the PLC analog filter remain enabled for 6ES7231-7PB22-0XA8?

Disable the PLC analog filter so that it does not delay detection of module error conditions.

How can I prevent an unused input of 6ES7231-7PB22-0XA8 from reporting an open wire?

Connect a resistor matching the selected RTD nominal resistance in place of the unused sensor.

Which wiring arrangement gives the best accuracy with 6ES7231-7PB22-0XA8?

Four-wire measurement gives the highest accuracy by separating the source and sense leads.

How frequently should my program read 6ES7231-7PB22-0XA8?

Read at least once per module update period of 405 ms, or 700 ms when measuring Pt10000.

Compatibility & Ordering Notes
Before ordering 6ES7231-7PB22-0XA8: Keep the complete CN order number and prepare matching RTDs, DIP-switch settings, lead arrangement, user supply and PLC error handling.

Compatibility Checklist for 6ES7231-7PB22-0XA8

  • Choose one RTD type for both channels.
  • Match the wiring switch to the actual two-, three- or four-wire connection.
  • Power-cycle after DIP-switch changes.
  • Disable CPU analog filtering for these RTD values.
  • Read the module regularly and process its range and supply-error indications.
Hot Selling Models
MU500-51-0 -10
170M4245 170-M-4245
R166619422
340.009210 L378 1020
KFD2-RR-Ex1
922AA2XMA9N-L
3RT1035-3AL20 3RH1921-2HA22
8-18-10
PSE-KRT02877
0821100103
NN5009 IND2004DN
G9SX-BC202
Allen-Bradley 856T-BP1
FDCIO223 S24218-B102-A1
6AV7674-1KA00-0AA0

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.