Siemens 6ES7222-1BD30-0XB0 SB 1222 DQ 4x24VDC 200kHz
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the SB 1222 board format for the controller expansion arrangement.
- Keep each output load at or below 0.1 A.
- Provide circuit protection appropriate to outputs without built-in short-circuit protection.
- Limit shielded output cables to 50 m and retain the orientation-dependent temperature limits.
6ES7222-1BD30-0XB0 SB 1222 DQ 4x24VDC 200kHz
Four 24 V DC high-speed MOSFET outputs rated for 200 kHz signal operation, with current-sinking or current-sourcing connection and 0.1 A per output.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7222-1BD30-0XB0 |
| Product Type | Digital output signal board |
| Core Function | High-speed transistor signal generation |
| Application | Compact controller output expansion |
200 kHz signals
Four high-speed digital outputs operate as one group.
24 V output level
Each solid-state output is rated at 0.1 A.
Compact board
The signal-board enclosure measures 38 × 62 × 21 mm.
Product Overview
6ES7222-1BD30-0XB0 adds four high-speed transistor outputs to a SIMATIC S7-1200 controller through the SB 1222 signal-board format. Its MOSFET outputs support current-sinking or current-sourcing wiring at a rated output voltage of 24 V DC.
The board is intended for signal loads up to 0.1 A per output, with output-state LEDs supporting local checks. Output wiring must account for the absence of short-circuit protection and the 50 m maximum shielded cable length.
Key Functions
Provide fast digital outputs
Four MOSFET solid-state outputs provide 200 kHz signal capability in a single output group.
Accommodate either signal polarity
Current-sinking and current-sourcing connections allow the output interface to suit the receiving circuit.
Show output states locally
Output-status LEDs provide a local indication for each output during commissioning and operation.
Official Specifications
| Output channels and grouping | 4 MOSFET solid-state outputs in one group |
|---|---|
| Rated switching frequency | 200 kHz |
| Output connection modes | Current-sinking or current-sourcing |
| Rated output voltage | 24 V DC |
| Output current | 0.1 A rated and maximum per output |
| Signal 0 output voltage | 1 V maximum with a 10 kΩ load |
| Signal 1 output voltage | L+ minus 1.5 V minimum |
| Maximum shielded output cable | 50 m |
| Typical backplane current | 35 mA from the 5 V DC backplane bus |
| Typical power loss | 0.5 W |
| Output short-circuit protection | None |
| Operating temperature | Horizontal: −20 to +60 °C; vertical: −20 to +50 °C |
| Storage and transport temperature | −40 to +70 °C |
| Maximum operating humidity | 95% at 25 °C, without condensation |
| Dimensions and weight | 38 × 62 × 21 mm (W × H × D); approximately 35 g |
Frequently Asked Questions
Is 6ES7222-1BD30-0XB0 suitable for a 24 V high-speed pulse input?
The board provides four 24 V DC MOSFET outputs with a rated signal frequency of 200 kHz.
Can 6ES7222-1BD30-0XB0 directly supply a 0.5 A load?
The rated and maximum permissible current is 0.1 A per output.
Can 6ES7222-1BD30-0XB0 drive both sinking and sourcing receiving circuits?
The solid-state outputs support current-sinking and current-sourcing connections.
Will 6ES7222-1BD30-0XB0 protect an output against a wiring short circuit?
The outputs do not include short-circuit protection.
What low-state voltage should I allow for on 6ES7222-1BD30-0XB0?
The maximum signal 0 output voltage is 1 V with a 10 kΩ load.
How much 5 V backplane current should I budget for 6ES7222-1BD30-0XB0?
Allow for a typical current consumption of 35 mA from the 5 V DC backplane bus.
What temperature limit applies when 6ES7222-1BD30-0XB0 is installed vertically?
Vertical installation permits an operating ambient temperature from −20 to +50 °C.