Siemens 6ES7193-7DA00-0AA0 ET 200iSP TM-PS-A Terminal Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the standard TM-PS-A article required by the installed ET 200iSP power-supply assembly.
- Keep TM-PS-A and the TM-PS-B redundant-supply position distinct.
- Secure the base with both fastening screws before inserting or removing the power module.
- Isolate the supply before releasing the wiring or removing the terminal base.
6ES7193-7DA00-0AA0 ET 200iSP TM-PS-A Terminal Module
The standard TM-PS-A terminal base for an ET 200iSP power-supply module, with a 60 mm width and screw-terminal station wiring.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-7DA00-0AA0 |
| Product Type | Power-supply mounting base |
| Core Function | Hold the station power-supply module |
| Application | ET 200iSP distributed I/O |
Separate terminal base
The terminal module holds the plug-in power-supply assembly and forms the fixed station wiring base.
Prewired supply connection
The TM-PS-A arrangement uses screw terminals for supply and equipotential-bonding connections.
Secured rail mounting
Two fastening screws secure the terminal base against sideways movement on the mounting rail.
Product Overview
6ES7193-7DA00-0AA0 forms the terminal-module base that holds the power-supply module in an ET 200iSP station.
The TM-PS-A arrangement allows the base wiring to be prepared separately from the plug-in power module and secures the station mechanically to its mounting rail.
Key Functions
Separate terminal base
The terminal module holds the plug-in power-supply assembly and forms the fixed station wiring base.
Prewired supply connection
The TM-PS-A arrangement uses screw terminals for supply and equipotential-bonding connections.
Secured rail mounting
Two fastening screws secure the terminal base against sideways movement on the mounting rail.
Official Specifications
| Dimensions | 60 × 190 × 52 mm |
|---|---|
| Approximate mass | 235 g |
| Supply connection construction | Screw terminals |
| Supply and bonding terminal count | 3 |
| Rail fastening | 2 fastening screws; tightening torque 0.8–1.1 N·m |
| ATEX marking | II 2 G (1) GD EEx de[ia/ib] IIC T4 |
| Conformity marking | CE |
Frequently Asked Questions
Does 6ES7193-7DA00-0AA0 include the plug-in power-supply electronics?
The article is the terminal base that holds the separate power-supply module.
Can I prewire 6ES7193-7DA00-0AA0 before inserting the power module?
The TM-PS-A terminal arrangement permits prewiring of the base.
Which terminal-base position is intended for a redundant second supply alongside 6ES7193-7DA00-0AA0?
The separate TM-PS-B terminal module is used for the redundant power-supply position.
How do I prevent 6ES7193-7DA00-0AA0 from sliding along the mounting rail?
Secure the base to the mounting rail with its two fastening screws tightened to 0.8–1.1 N·m.
How much width must I reserve along the rail for 6ES7193-7DA00-0AA0?
The terminal module occupies a width of 60 mm.
Can I remove the power module while the fastening screws of 6ES7193-7DA00-0AA0 are loose?
Both terminal-module fastening screws must be tightened before the inserted power supply can be uninstalled.
What preparation is required before removing the wired 6ES7193-7DA00-0AA0 base?
Switch off the supply voltage and release the wiring before removing the terminal module.