EN
Siemens 6ES7193-4CB00-0AA0 SIMATIC ET 200S TM-E15S23-01 Terminal Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the circuit to numbered positions 1–3 and 5–7.
- Provide any necessary AUX1 field connection at another suitable base.
- Retain the 120 mm housing clearance.
- Strip 11 mm and tighten terminal screws to 0.4–0.7 N·m.
6ES7193-4CB00-0AA0 SIMATIC ET 200S TM-E15S23-01 Terminal Module
A screw-terminal base with six numbered field positions and a continuous auxiliary bus without local AUX1 access.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-4CB00-0AA0 |
| Product Type | Electronic module base |
| Core Function | Field signal termination |
| Application | 15 mm ET 200S electronic modules |
Six field positions
The electronic module assigns numbered terminals 1–3 and 5–7.
AUX1 pass-through
The auxiliary bus remains continuous without a local terminal connection.
Shorter terminal housing
A 120 mm body height accommodates the 2 × 3 screw-terminal pattern.
Product Overview
6ES7193-4CB00-0AA0 is the TM-E15S23-01 screw-terminal base for 15 mm electronic-module positions in an ET 200S station.
Its six-position field arrangement leaves AUX1 as an internal pass-through bus and provides the electrical and mechanical interface for the inserted electronic module.
Key Functions
Connect the required field positions
The inserted electronic module defines signals at terminals 1–3 and 5–7.
Pass the station auxiliary bus
AUX1 continues through the base to the potential group on the left without a local field tap.
Prepare the electronic module position
Mount and wire the terminal base before inserting the electronics, using screw terminals with a defined tightening torque.
Official Specifications
| Terminal arrangement | 2 × 3 connections |
|---|---|
| Connection technology | Screw terminals |
| Electronic-module terminal positions | 1–3 and 5–7 |
| AUX1 terminal access | No local connection |
| AUX1 bus routing | Continuous to the potential group on the left |
| Bare solid and flexible conductor range | 0.14–2.5 mm² |
| Flexible conductor range with ferrule | 0.14–1.5 mm² |
| Wire stripping length | 11 mm |
| Conductors per connection | 1; alternatively 2 totaling up to 1.5 mm² in a shared ferrule |
| Maximum wire insulation diameter | 3.1 mm at 1.5 mm²; 3.8 mm at 2.5 mm² |
| Wiring tool and torque | 3 mm screwdriver; 0.4–0.7 N·m |
| Dimensions (W × H × D) | 15 × 120 × 43 mm |
| Approximate module weight | 55 g |
Frequently Asked Questions
Will 6ES7193-4CB00-0AA0 give me numbered terminals 4 and 8?
No, this six-position base provides terminals 1–3 and 5–7 for the inserted electronic module.
Can I use 6ES7193-4CB00-0AA0 to break the auxiliary bus into a new section?
No, its AUX1 bus stays continuous to the group on the left.
Where should I land AUX1 if my station uses 6ES7193-4CB00-0AA0?
Use a terminal module with auxiliary access elsewhere in the station because this base exposes no AUX1 field terminals.
Can 6ES7193-4CB00-0AA0 support the 4DI DC24V ST 6ES7131-4BD01-0AA0?
Yes, the TM-E15S23-01 is one of the compatible screw-terminal bases for that electronic module.
Does 6ES7193-4CB00-0AA0 need the same 157 mm height as the universal TM-E15S26-A1?
No, this six-position module is 120 mm high, while the universal base is 157 mm high.
How do I prepare a two-wire shared ferrule for 6ES7193-4CB00-0AA0?
Keep the combined conductor cross-section within 1.5 mm² and use an 11 mm stripped wire preparation.
What should I check when replacing 6ES7193-4CB00-0AA0 in a prewired row?
Preserve the six-position terminal assignment, the continuous AUX1 path and the screw-terminal wiring before reinserting the electronic module.
