Siemens 6ES7193-1CL10-0XA0 SIMATIC ET 200L TB32L Spring-Terminal Block
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Choose the 1CL10 spring-terminal variant.
- Match the 32 DI, 32 DO or 16 DI/16 DO ET 200L electronics block.
- Use the specified conductor size and ferrule arrangement.
- Release each spring using the lower opening and insert the wire in the upper opening.
- Preserve the signal, supply and reference-terminal grouping.
6ES7193-1CL10-0XA0 SIMATIC ET 200L TB32L Spring-Terminal Block
A 32-channel TB32L base with spring terminals for the assigned ET 200L electronics blocks.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-1CL10-0XA0 |
| Product Type | Stationary field-wiring base |
| Core Function | Retains field terminations beneath plug-in electronics |
| Application | ET 200L digital I/O assemblies |
Spring terminal version
Uses the 1CL10 spring-connection variant.
Stationary wiring
The base remains in place when changing the electronics.
32-channel assembly
Supports the assigned digital input, output and mixed electronics.
Product Overview
6ES7193-1CL10-0XA0 is the spring-terminal version of the ET 200L TB32L stationary wiring base.
The terminal block accepts the assigned 32-input, 32-output or mixed 16-input/16-output electronics block while carrying the station’s field conductors beneath the removable electronics.
Key Functions
Spring-clamped field conductors
The spring-terminal connection is released with a screwdriver to insert or remove the prepared conductor.
Electronics replacement with wiring retained
The base carries the stationary wiring while the plug-in electronics provide the I/O and PROFIBUS connection.
Grouped supply and reference wiring
The TB32L terminal assignment organizes the field signals and the associated supply and common-reference connections.
Official Specifications
| Digital connection capacity | 32 channels |
|---|---|
| Signal-conductor cross-section | 0.14–1.5 mm² for solid or flexible conductors; ferrules as specified |
| Conductors per connection | 1, or 2 totaling up to 1.5 mm² in a common ferrule |
| Maximum insulation diameter | 3.1 mm; 3.8 mm for a 2.5 mm² conductor |
| Insulation stripping length | 7–11 mm; 11 mm for the spring-terminal wiring procedure |
| Spring-release tool | 0.5 × 3.5 mm screwdriver to DIN 5264 |
| Ground connection | Cable lug for M4 screw, up to 6 mm² |
| Dimensions (W × H × D) | 191 × 100 × 40.5 mm |
| Assembled height from DIN-rail top | 82 mm with electronics and bus connector 6ES7972-0CA30-0XA0 |
| Approximate weight | 350 g |
Frequently Asked Questions
Which electronics blocks fit 6ES7193-1CL10-0XA0?
The TB32L accepts ET 200L 32 DI DC24V, 32 DO DC24V/0.5A and 16 DI/16 DO DC24V/0.5A electronics blocks.
Is 6ES7193-1CL10-0XA0 the screw-terminal TB32L version?
The 1CL10 version uses spring terminals.
Where do I insert the screwdriver when wiring 6ES7193-1CL10-0XA0?
Insert the screwdriver in the lower release opening and the conductor in the upper opening until it reaches the stop.
How much insulation should I strip for 6ES7193-1CL10-0XA0?
Strip the conductor to 11 mm for the spring-terminal wiring procedure.
Can I put two wires in one terminal of 6ES7193-1CL10-0XA0?
Two conductors are permitted when their combined cross-section is no more than 1.5 mm² and they share one suitable ferrule.
Will the field wiring stay connected when I change the electronics on 6ES7193-1CL10-0XA0?
The terminal block carries the stationary field wiring, allowing the compatible electronics block to be changed separately.
Is the PROFIBUS connector built into 6ES7193-1CL10-0XA0?
The PROFIBUS DP connection belongs to the plug-in electronics block rather than the stationary terminal base.