Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7141 4bf00 0aa0 et 200pro 8 di 24 v dc-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC ET 200pro 6ES7141-4BF00-0AA0 ET 200pro 8 DI 24 V DC

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC ET 200PRO • DIGITAL INPUT MODULE

6ES7141-4BF00-0AA0 8 DI 24 V DC Electronic Module

Official Siemens data for the standard eight-channel ET 200pro digital-input module with module diagnostics.

At a Glance

Brand Siemens
Model 6ES7141-4BF00-0AA0
Product Type SIMATIC ET 200pro 8 DI 24 V DC electronic module
Core Function Acquires eight 24 V DC digital sensor signals with module diagnostics
Application / Compatible Series SIMATIC ET 200pro stations with compatible 6ES7194-4.. connection modules

Exact Identification

Match the full Siemens order number and installed hardware version.

Engineering Fit

Confirm electrical data, terminals and the target SIMATIC system.

Configuration Check

Verify wiring and configuration against the official Siemens manual.

Product Overview

6ES7141-4BF00-0AA0 is officially identified by Siemens as 8 DI 24 V DC Electronic Input Module in the SIMATIC ET 200pro product range.

Siemens identifies this ET 200pro electronic module with eight 24 V DC digital inputs and module diagnostics. The bus module is included, while the matching 6ES7194-4..00-0AA0 IO connection module is ordered separately.

Ordering focus: verify the complete 6ES7141-4BF00-0AA0 article number, installed hardware configuration, connections and Siemens system documentation before replacement.

Key Functions

Model-Specific Configuration

6ES7141-4BF00-0AA0: Eight 24 V DC digital inputs with module diagnostics and included bus module.

System Connection

ET 200pro bus-module connection; matching 6ES7194-4..00-0AA0 IO connection module ordered separately.

Replacement Control

Use the full 6ES7141-4BF00-0AA0 article number and official Siemens documentation to verify the installed configuration before replacement.

Official Specifications
Rated Supply Voltage 24 V DC
Reverse-Polarity Protection Yes, against destruction
Current from 1L+ 20 mA max.
Backplane-Bus Current 20 mA max. at 3.3 V DC
Sensor-Supply Outputs 8
Sensor-Supply Short-Circuit Protection Electronic, per module
Sensor-Supply Output Current 1 A max. up to 55 °C
Power Loss 2.5 W typical
Address Space 1 byte max.
Input Characteristic IEC 61131 Type 1
Signal 0 Voltage -3 V to +5 V
Signal 1 Voltage 13 V to 30 V
Signal 1 Input Current 7 mA typical
Input Delay 1.2 to 4.8 ms for both transitions
Unshielded Cable Length 30 m max.
Two-Wire Sensor Quiescent Current 1.5 mA max.
Diagnostics Diagnostic alarm, readable diagnostics and module short-circuit
Isolation Test Voltage 707 V DC type test
Dimensions (W × H × D) 45 × 130 × 35 mm
Approximate Weight 140 g
Frequently Asked Questions

Which connection-module family should be matched with 6ES7141-4BF00-0AA0?

Use a compatible ET 200pro IO connection module in the 6ES7194-4..00-0AA0 family and match its connector pattern to the field wiring.

What voltage thresholds define digital states for 6ES7141-4BF00-0AA0?

A low state is -3 V to +5 V, while a high state is 13 V to 30 V.

Can two-wire sensors be connected to 6ES7141-4BF00-0AA0?

Yes. The permissible quiescent current for a two-wire sensor is 1.5 mA maximum.

Is the input delay adjustable on 6ES7141-4BF00-0AA0?

No. The standard inputs use a fixed transition delay in the 1.2 to 4.8 ms range.

Which fault information can technicians read from 6ES7141-4BF00-0AA0?

The station can report a diagnostic alarm and module-level sensor-supply short circuit; channel status is shown by green LEDs.

How many inputs may operate simultaneously on 6ES7141-4BF00-0AA0?

All eight inputs may be active at the same time in any mounting position up to 55 °C.

What field-cable length is allowed for 6ES7141-4BF00-0AA0?

The official data specifies a maximum of 30 m for unshielded input wiring.

Compatibility & Ordering Notes
Before ordering 6ES7141-4BF00-0AA0: compare the complete article number, official configuration, system connections and required Siemens accessories with the installed unit and documentation.

Compatibility Checklist for 6ES7141-4BF00-0AA0

  • Match the complete 6ES7141-4BF00-0AA0 article number without shortening the suffix.
  • Confirm compatibility with the installed SIMATIC ET 200pro product range.
  • Verify Eight 24 V DC digital inputs with module diagnostics and included bus module.
  • Confirm ET 200pro bus-module connection; matching 6ES7194-4..00-0AA0 IO connection module ordered separately.
Hot Selling Models
VJC109921 396615
E2-16DO24-D
BMXXBP0600
EDWARDS 6830-4
KFD2-STC4-EX1
VSE002 RS-485
ABB DO562 / 1SAP230900R0000
C-DM-0402M-RLC
BMXDDI3202K
IFM EVC001
GCF-S7
X12101314-1ABS
3RN1011-1CK00
TT142N16KOF
EMT6-K

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.