Siemens SIMATIC ET 200iSP 6ES7138-7FD00-0AB0 4 F-DO Ex Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm the ET 200iSP interface module, terminal module, power bus and project hardware entry.
- Verify the complete intrinsically safe loop, actuator parameters, cable values and applicable hazardous-area approval.
- Match the F-address, PROFIsafe settings and validated safety program.
- Retain the configured light-test and dark-test readback times.
- Parallel only channels 0 and 1 or channels 2 and 3 on the same module.
- Verify the actuator current and load resistance before energizing the output.
Siemens · SIMATIC ET 200iSP
6ES7138-7FD00-0AB0 4 F-DO Ex 17.4 V/40 mA Module
Siemens 6ES7138-7FD00-0AB0 is a four-channel fail-safe ET 200iSP transistor output module for intrinsically safe actuators, with PP switching, output readback testing and channel diagnostics.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7138-7FD00-0AB0 |
| Product Type | Fail-Safe Intrinsically Safe Digital Output Module |
| Core Function | Controls four Ex i actuators with PP switching and safety diagnostics |
| Application or Compatible Series | SIMATIC ET 200iSP safety stations for hazardous-area field devices |
Exact Output Application
Connect only compatible intrinsically safe solenoid valves, DC relays or actuators within the documented output limits.
Safety Parameter Match
Restore the F-address, PROFIsafe settings, light-test time and readback time from the validated safety project.
Channel Pairing
Parallel only channels 0 and 1 or channels 2 and 3 on the same module using the prescribed terminal arrangement.
Product Overview
Siemens 6ES7138-7FD00-0AB0 is a four-channel fail-safe ET 200iSP transistor output module for intrinsically safe actuators, with PP switching, output readback testing and channel diagnostics.
Four intrinsically safe PP-switching channels control compatible solenoid valves, relays and field actuators. Configurable light-test and dark-test monitoring checks the safe behavior of each output. Selected channel pairs may be connected in parallel according to the specified terminal arrangement.
Key Functions
Hazardous-Area Actuator Control
Four intrinsically safe PP-switching channels control compatible solenoid valves, relays and field actuators.
Output Readback Testing
Configurable light-test and dark-test monitoring checks the safe behavior of each output.
Channel Pairing for Higher Power
Selected channel pairs may be connected in parallel according to the specified terminal arrangement.
Official Specifications
| Permissible DC Supply Range | 19.2 to 30 V DC |
|---|---|
| Typical Current Consumption | 340 mA |
| Maximum L+ Current without Load | 510 mA through the internal power bus |
| Maximum Power Loss | 5.3 W |
| Output Technology | Transistor, PP-switching |
| Number of Outputs | 4 |
| Maximum Signal-1 Output Voltage | 17.4 V DC |
| Rated Output Current | 40 mA |
| Maximum Signal-0 Residual Current | 10 µA |
| Internal Resistance | 167 Ω |
| Permissible Load Resistance | 270 Ω to 18 kΩ |
| Parallel Output Pairs | Channels 0 and 1 or channels 2 and 3 on the same module |
| Diagnostic Monitoring | Short circuit, overload and wire break |
| Indicators | SF, SAFE and per-channel green/red status or fault LEDs |
| Maximum Safety Classification | SIL 3, Performance Level e and Category 4 |
| Response-Time Formula | 9 ms plus the greater of the configured light-test time or dark-test readback time |
| Cycle-Time Formula | 7 ms plus the configured light-test time |
| Electrical Connection | Screw or spring-loaded terminal |
| Dimensions | 30 × 129 × 136.5 mm |
Frequently Asked Questions
Which actuators can be connected to 6ES7138-7FD00-0AB0?
Compatible loads include intrinsically safe solenoid valves, DC relays and other Ex i actuators within the stated output limits.
Can outputs on 6ES7138-7FD00-0AB0 be connected in parallel?
Only channels 0 and 1 or channels 2 and 3 may be paired on the same module using the prescribed terminals.
What safety level can 6ES7138-7FD00-0AB0 achieve?
A correctly designed system can reach SIL 3, Performance Level e and Category 4.
What supply range is required by 6ES7138-7FD00-0AB0?
The permitted supply range is 19.2 to 30 V DC through the ET 200iSP power arrangement.
How much current can each channel of 6ES7138-7FD00-0AB0 deliver?
Each output is rated for a maximum of 40 mA at the specified intrinsically safe characteristic.
Which faults are monitored by 6ES7138-7FD00-0AB0?
The module monitors short circuit, overload and wire break and reports status through LEDs and assignable diagnostics.
What must be checked before replacing 6ES7138-7FD00-0AB0?
Confirm the terminal module, Ex circuit parameters, F-address, safety parameters, channel pairing and actuator load before recommissioning.