Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7138 4fa04 0ab0 et 200s 4 8 f di profisafe module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7138-4FA04-0AB0 ET 200S 4/8 F-DI PROFIsafe Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC ET 200S fail-safe I/O

6ES7138-4FA04-0AB0 ET 200S 4/8 F-DI PROFIsafe Module

A 30 mm fail-safe input module with eight single-channel or four two-channel inputs and configurable input filtering.

At a Glance

Brand Siemens
Model 6ES7138-4FA04-0AB0
Product Type Safety input electronics
Core Function Acquire fail-safe discrete signals
Application ET 200S PROFIsafe stations

Single- or two-channel acquisition

Eight single-channel inputs or four two-channel input pairs allow the wiring architecture to follow the safety application.

Adjustable filtering

Rising- and falling-edge input delays can be parameterized from 0.3 to 17 ms.

Sensor power distribution

Two sensor supply outputs provide a rated output current of 300 mA with electronic short-circuit protection.

Product Overview

6ES7138-4FA04-0AB0 brings fail-safe 24 V DC input acquisition to an ET 200S station.

Single-channel operation reaches SIL 2, while suitable two-channel operation reaches SIL 3, with Category 4 and Performance Level e available in the applicable safety configuration.

Ordering focus: Match the required safety architecture, sensor wiring and PROFIsafe station interface before selecting the input configuration.
Key Functions

Single- or two-channel acquisition

Eight single-channel inputs or four two-channel input pairs allow the wiring architecture to follow the safety application.

Adjustable filtering

Rising- and falling-edge input delays can be parameterized from 0.3 to 17 ms.

Sensor power distribution

Two sensor supply outputs provide a rated output current of 300 mA with electronic short-circuit protection.

Official Specifications
Rated supply 24 V DC
Sensor supply outputs 2; output voltage at least L+ minus 1.5 V
Rated sensor supply current 300 mA
Sensor supply short-circuit threshold 0.7–1.8 A
Typical power loss 4 W
Input and output address allocation 6 input bytes and 4 output bytes
Input configuration 8 single-channel inputs or 4 two-channel inputs
Input characteristic IEC 61131 Type 1
Signal 0 voltage −30 to +5 V
Signal 1 voltage +15 to +30 V
Typical input current 3.7 mA
Parameterized input delay 0.3–17 ms on rising and falling edges
Maximum signal cable length 200 m, shielded or unshielded
Two-wire sensor connection Not supported
Safety capability SIL 2 single-channel; SIL 3 two-channel; up to Category 4 and PL e
Diagnostic indication Red SF group-fault LED and green input-status LEDs
Electrical isolation Isolated from the backplane bus; no isolation between channels or from L+
Isolation test voltage 500 V DC
Reverse polarity protection Not provided
Dimensions and approximate mass 30 × 81 × 52 mm; 78 g
Frequently Asked Questions

Can I connect ordinary two-wire sensors to 6ES7138-4FA04-0AB0?

Two-wire sensor connection is not supported by this input module.

How do I use 6ES7138-4FA04-0AB0 for a SIL 3 input application?

Use a suitable two-channel safety configuration, since single-channel operation is limited to SIL 2.

Can 6ES7138-4FA04-0AB0 suppress a short input pulse?

Its rising- and falling-edge input delays can be parameterized between 0.3 and 17 ms.

How much process-image space should I reserve for 6ES7138-4FA04-0AB0?

Reserve six input bytes and four output bytes for the module.

Which signal voltage switches an input of 6ES7138-4FA04-0AB0 on?

A signal voltage between +15 and +30 V is interpreted as signal 1.

Can 6ES7138-4FA04-0AB0 operate in a PROFINET ET 200S station?

PROFINET operation is possible with an IM151-3 HF interface module.

How far can I run the signal cable from 6ES7138-4FA04-0AB0?

Shielded and unshielded input cables can each be up to 200 m long.

Compatibility & Ordering Notes
Before ordering 6ES7138-4FA04-0AB0: Match the required safety architecture, sensor wiring and PROFIsafe station interface before selecting the input configuration.

Before installation

  • Select single-channel or two-channel operation to suit the required safety level.
  • Use IM151-3 HF when integrating this module into a PROFINET station.
  • Allocate six input bytes and four output bytes in the project.
  • Respect the sensor-supply current rating and provide correct supply polarity.
Hot Selling Models
CA4DN31BD3
8031 563050
5SJ4202-8HG42
P1XN016DAN60.000DGNN
3RH2371-2FB40
6ES5300-3AB11
NBG-4000
VL18-4P3240 6013551
6ES5375-0LA61
ABB S403M C16 S403C16
DSBC-40-30-PPSA-N3
2000B5011 0BF-FPKG/T
1020400000
ASK71.1
CPE10-M1CH-3OL-M7

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.