Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7134 6gd00 0ba1 simatic et 200sp ai 4xi 2 4 wire st-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7134-6GD00-0BA1 SIMATIC ET 200SP AI 4xI 2-/4-wire ST

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC ET 200SP

6ES7134-6GD00-0BA1 SIMATIC ET 200SP AI 4xI 2-/4-wire ST

Four differential current inputs with sixteen-bit conversion, selectable current ranges, module diagnostics and BaseUnit type A0 or A1 compatibility.

At a Glance

Brand Siemens
Model 6ES7134-6GD00-0BA1
Product Type Analog current input module
Core Function Four-channel current acquisition
Application ET 200SP stations with two- or four-wire transmitters

Current transmitter acquisition

Four differential channels accept the stated unipolar and bipolar current ranges.

Noise and signal filtering

Selectable integration and smoothing settings adapt the measurement response to the installation.

Module and signal diagnostics

Diagnostic alarms report supply conditions, range errors and the specified wire-break and short-circuit conditions.

Product Overview

6ES7134-6GD00-0BA1 acquires four current signals from two-wire or four-wire transmitters in a SIMATIC ET 200SP station.

The module combines integrating conversion, selectable interference suppression and smoothing with diagnostics for supply, wire-break and range conditions.

Ordering focus: Match the current signal, transmitter connection, A0 or A1 BaseUnit and conversion-time settings.
Key Functions

Current transmitter acquisition

Four differential channels accept the stated unipolar and bipolar current ranges.

Noise and signal filtering

Selectable integration and smoothing settings adapt the measurement response to the installation.

Module and signal diagnostics

Diagnostic alarms report supply conditions, range errors and the specified wire-break and short-circuit conditions.

Official Specifications
BaseUnit compatibility and color code BU type A0 or A1; CC03
Supply voltage 24 V DC; permitted 19.2–28.8 V DC
Maximum module current 37 mA, excluding sensor supply
Typical power loss 0.85 W, excluding sensor supply
Input channels 4 differential current inputs
Current ranges 0–20 mA, 4–20 mA and −20 to +20 mA
Input resistance 100 Ω; approximately 0.7 V additional diode drop in two-wire operation
Maximum input current destruction limit 50 mA
Maximum resolution 16 bits including sign and overrange
Interference suppression and conversion time 16.6 / 50 / 60 Hz; 180 / 60 / 50 ms per channel
Smoothing None, 4, 8 or 16 samples
Current measurement accuracy Basic error ±0.3% at 25°C; operational error ±0.5% over temperature
Sensor supply 24 V DC, short-circuit protected; 20 mA per channel, up to 50 mA for less than 10 s
Maximum two-wire transmitter burden 650 Ω
Maximum shielded cable 1000 m
Address space 8 bytes; plus 1 byte for quality information
Wire-break diagnosis Available in the 4–20 mA range
Common-mode voltage limit 10 V DC between inputs
RUN parameter changes Reparameterization supported; calibration in RUN not supported
Dimensions and approximate weight 15 × 73 × 58 mm (W × H × D); 31 g
Frequently Asked Questions

Can I connect a voltage-output transmitter directly to 6ES7134-6GD00-0BA1?

The module measures current signals and does not provide voltage-measurement channels.

Which BaseUnits can I use under 6ES7134-6GD00-0BA1?

Use a BaseUnit of type A0 or A1 with the CC03 channel identification.

When can 6ES7134-6GD00-0BA1 diagnose a broken signal wire?

Wire-break diagnosis is available for the four-to-twenty-milliampere measuring range.

What voltage drop should I include for a two-wire input circuit on 6ES7134-6GD00-0BA1?

Include the hundred-ohm input resistance and approximately seven-tenths of a volt of additional diode drop.

Can I change parameters on 6ES7134-6GD00-0BA1 while the station remains in RUN?

Reparameterization in RUN is supported, while calibration in RUN is not supported.

How does selecting sixty-hertz suppression affect conversion on 6ES7134-6GD00-0BA1?

The specified conversion time is fifty milliseconds per channel with sixty-hertz interference suppression.

How much input address space should I reserve for 6ES7134-6GD00-0BA1 with quality information?

Reserve eight bytes for measured values and one additional byte for quality information.

Compatibility & Ordering Notes
Before ordering 6ES7134-6GD00-0BA1: Match the current signal, transmitter connection, A0 or A1 BaseUnit and conversion-time settings.

Before installation

  • Select current-mode transmitters and the matching two-wire or four-wire connection.
  • Match the BaseUnit type and CC03 identification before installation.
  • Include sensor-supply current, transmitter burden and input voltage drop in the loop calculation.
  • Choose integration, smoothing and enabled diagnostics to suit the process response.
Hot Selling Models
8TX 2832218
15-30L-10TP
RM/8021/M/130
ASB8/LED 5/4-RS120M
UMK-SE 11.25-1
QM/32/5
Wago 834-1204
BISC-306
Bi10M30RZ3X
TMLE230328 TMLE4R23MOP
9106B1A
GF16P21A3
WQV2.5/10 1054460000
S3M 1847
7000-13201-3311500

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.