Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7132 4hb01 0ab0 et 200s 2 channel relay output modules pack of 5-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7132-4HB01-0AB0 ET 200S 2-Channel Relay Output Modules, Pack of 5

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200S

6ES7132-4HB01-0AB0 ET 200S 2-Channel Relay Output Modules, Pack of 5

A five-unit pack of 15 mm ET 200S electronic modules, each providing two 5 A relay outputs with configurable substitute values.

At a Glance

Brand Siemens
Model 6ES7132-4HB01-0AB0
Product Type Two-channel relay output electronic module, five-unit pack
Core Function Switches two relay outputs per module
Application ET 200S distributed control of AC and DC switching loads

Two outputs per module

Each electronic module has two relay output channels.

Five-unit order pack

The order number covers five electronic modules.

Substitute-value operation

Each output supports configurable substitute values of 0 or 1.

Product Overview

6ES7132-4HB01-0AB0 is a five-unit pack of ET 200S relay output electronic modules for switching field loads through two channels per module.

The 15 mm modules obtain their 24 V DC electronics supply from the power module and provide isolated relay channels, output status indication and selectable substitute values.

Ordering focus: Distinguish the five-module packing unit from the two relay channels on each module, then check the load current, switching rate and external circuit protection.
Key Functions

Relay load switching

Two relay outputs per module switch loads within the specified 24 V DC to 230 V AC and 5 A ratings, with a minimum load current of 8 mA.

Configured fallback behavior

Substitute values of 0 or 1 can be assigned to the outputs for the configured substitute-value response.

Compact ET 200S integration

A 15 mm module width and a packed address allocation of two bits support compact ET 200S station layouts.

Official Specifications
Rated electronics supply 24 V DC from power module; reverse-polarity protection
Maximum no-load current from L+ 30 mA
Maximum 3.3 V backplane current 10 mA
Typical power loss 0.6 W
Address allocation Maximum 1 byte per module; 2 bits with packing
Relay switching voltage 24 V DC to 230 V AC
Rated output current and thermal continuous current 5 A
Minimum load current 8 mA
Maximum resistive-load and lamp-load switching frequency 2 Hz
Maximum inductive-load switching frequency 0.5 Hz
Short-circuit protection No integrated protection
Inductive shutdown-voltage limitation Not integrated
Maximum output cable length 1,000 m shielded; 600 m unshielded
Configurable substitute values 0 or 1
Output status indication Green LED
Channel isolation Between channels, and from backplane bus and load voltage L+
Dimensions per module (W × H × D) 15 × 81 × 52 mm
Approximate weight per module 50 g
Frequently Asked Questions

Does an order for 6ES7132-4HB01-0AB0 contain two outputs or five modules?

One packing unit contains five modules, each with two relay outputs.

Can 6ES7132-4HB01-0AB0 reliably switch a very small sensing load?

The connected load must satisfy the specified minimum current of 8 mA.

How much output address space does 6ES7132-4HB01-0AB0 use when packing is enabled?

Each module uses two output bits with packing enabled, compared with a maximum allocation of one byte per module.

What fallback output levels can be selected for 6ES7132-4HB01-0AB0?

The configurable substitute values are 0 and 1.

Does 6ES7132-4HB01-0AB0 include short-circuit protection for the load circuit?

The relay outputs have no integrated short-circuit protection, so the load circuit requires appropriate external protection.

What changes when 6ES7132-4HB01-0AB0 switches an inductive load instead of a resistive load?

The maximum switching rate falls from 2 Hz for a resistive load to 0.5 Hz for an inductive load, and inductive shutdown-voltage limitation is not integrated.

Where does 6ES7132-4HB01-0AB0 obtain its electronics supply?

The electronics receive a rated 24 V DC supply from the ET 200S power module.

Compatibility & Ordering Notes
Before ordering 6ES7132-4HB01-0AB0: Order by the five-unit packing quantity and check the ET 200S terminal arrangement, 24 V power module, load current and switching duty before replacement.

Compatibility Checklist for 6ES7132-4HB01-0AB0

  • Allow two relay channels per module and five modules per packing unit.
  • Match the ET 200S station terminal arrangement and 24 V DC power-module supply.
  • Keep each load within the 5 A rating and above the 8 mA minimum.
  • Provide load-circuit protection and suitable suppression for inductive loads.
  • Configure the intended 0 or 1 substitute values and address packing.
Hot Selling Models
ABB ACS-CP-C 3ABD64739000
WT12-P1471
DG4G06C1
DNDS1RGV3C 22RG06
KD140500N
60.13.8.230.0020 3C0-3PDT
3RQ3038-1AF00
0822394208
5-310-10z
325 445/5 N26
P1-32/I2/SVB/HI11
T175N22 E0C-51-15FN
T175N22E0C-51-27H2
T175N22E0C21
3044636

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.