Siemens SIMATIC ET 200S 6ES7132-4HB01-0AA0 2 DO Relay 24 V DC–230 V AC/5 A
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: China
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7132-4HB01-0AA0 2RO Relay Output Electronic Module
Two-channel normally open relay output module for switching 24–120 V DC or 24–230 V AC loads up to 5 A in SIMATIC ET 200S stations.
At a Glance
| Manufacturer | Siemens |
| Article Number | 6ES7132-4HB01-0AA0 |
| Product Type | 2RO NO relay output electronic module |
| Core Function | Switches two isolated actuator loads through normally open relay contacts |
| Application / Compatible Series | SIMATIC ET 200S; solenoid valves, DC contactors and indicator lamps |
Product Overview
6ES7132-4HB01-0AA0 is officially identified by Siemens as 2-Channel Relay Digital Output Electronic Module in the SIMATIC ET 200S product range.
Siemens identifies this packing unit of five ET 200S electronic modules with two relay digital outputs per module, 24 V DC to 230 V AC switching, 5 A rated output current, substitute-value output and an SF group-fault LED.
Ordering focus: verify the complete 6ES7132-4HB01-0AA0 article number, installed hardware configuration, connections and Siemens system documentation before replacement.
Key Functions
Model-Specific Configuration
6ES7132-4HB01-0AA0: Five ET 200S electronic modules, each with two 5 A relay outputs and substitute-value output.
System Connection
ET 200S terminal-module and backplane connection; 15 mm electronic-module width.
Replacement Control
Use the full 6ES7132-4HB01-0AA0 article number and official Siemens documentation to verify the installed configuration before replacement.
Official Specifications
| Number of Relay Outputs | 2 |
| Contact Type | Normally open relay contacts |
| Rated Load Voltage | 24–120 V DC; 24–230 V AC |
| Rated Supply Voltage L+ | 24 V DC from the power module |
| Maximum Channel Current | 5 A up to 50 °C; 4 A up to 60 °C |
| Minimum Load Current | 8 mA |
| Minimum Switching Voltage | 17 V |
| Resistive Load Switching Rate | 2 Hz |
| Inductive Load Switching Rate | 0.5 Hz |
| Lamp Load Switching Rate | 2 Hz |
| Address Space | 1 byte; 2 bits when packed |
| Parameter Length | 3 bytes |
| Shielded Cable Length | Up to 1,000 m |
| Unshielded Cable Length | Up to 600 m |
| Electrical Isolation | Between channels, backplane bus and supply voltage |
| Power Consumption from L+ | Maximum 30 mA |
| Power Dissipation | Typically 0.6 W |
| Module Width | 15 mm |
| Approximate Weight | 50 g |
| Output Status Display | Green LED per channel |
Official source: Siemens ET 200S 2RO NO product manual A5E01077282-01.
Frequently Asked Questions
Which ET 200S potential group should 6ES7132-4HB01-0AA0 be installed in?
Install the module only in a 24 V DC potential group supplied by the power module.
Which actuator loads can 6ES7132-4HB01-0AA0 switch?
The two normally open relay channels are intended for loads such as solenoid valves, DC contactors and indicator lamps within the specified voltage and current limits.
Does 6ES7132-4HB01-0AA0 need external output protection?
Yes. The relay outputs do not have internal short-circuit protection and must be protected externally with 6 A fuses.
Can engineers connect the outputs of 6ES7132-4HB01-0AA0 in parallel?
No. Parallel connection is not supported for redundant load control or for increasing switching capacity.
How can 6ES7132-4HB01-0AA0 respond when the CPU or master enters STOP?
The channel response can be parameterized to output a substitute value or retain the last value; the default substitute value is 0.
What switching frequency applies to 6ES7132-4HB01-0AA0 for different loads?
The maximum rate is 2 Hz for resistive and lamp loads and 0.5 Hz for inductive loads.
What temperature condition applies when 6ES7132-4HB01-0AA0 is mounted vertically?
Vertical installation supports an extended ambient range from 0 to 55 °C; channel-current limits must also be observed.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7132-4HB01-0AA0
- Match the complete 6ES7132-4HB01-0AA0 article number without shortening the suffix.
- Confirm compatibility with the installed SIMATIC ET 200S product range.
- Verify Five ET 200S electronic modules, each with two 5 A relay outputs and substitute-value output.
- Confirm ET 200S terminal-module and backplane connection; 15 mm electronic-module width.