EN
Siemens SIMATIC ET 200L-SC 16 DO Digital Output Electronic Block 6ES7132-1BH11-0XB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC ET 200L-SC
6ES7132-1BH11-0XB0 SIMATIC ET 200L-SC 16 DO Digital Output Electronic Block
The SIMATIC ET 200L-SC electronic block provides 16 digital outputs in two groups of eight for 24 V DC field loads, with 0.5 A rated output current per channel and a TB 16SC connection.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7132-1BH11-0XB0 |
| Product Type | ET 200L-SC digital output electronic block |
| Core Function | Switches solenoid valves, DC contactors and indicator lights from distributed I/O commands |
| Application or Compatible Series | SIMATIC ET 200L-SC distributed I/O and Smart Connect expansion systems |
Exact Identification
Match 6ES7132-1BH11-0XB0 character by character and confirm the complete SIMATIC ET 200L-SC 16 DO Digital Output Electronic Block designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The SIMATIC ET 200L-SC electronic block provides 16 digital outputs in two groups of eight for 24 V DC field loads, with 0.5 A rated output current per channel and a TB 16SC connection.
Sixteen outputs are divided into two groups of eight, allowing structured field wiring for DC actuators. Electronic short-circuit protection supports 24 V DC loads, with a typical response threshold of 0.7 A. The TB 16SC connection integrates the electronic block with the ET 200L-SC and Smart Connect arrangement.
Key Functions
Grouped Digital Outputs
Sixteen outputs are divided into two groups of eight, allowing structured field wiring for DC actuators.
Protected Load Switching
Electronic short-circuit protection supports 24 V DC loads, with a typical response threshold of 0.7 A.
Smart Connect Expansion
The TB 16SC connection integrates the electronic block with the ET 200L-SC and Smart Connect arrangement.
Official Specifications
| Dimensions (W × H × D) | 145 × 60 × 60.5 mm |
|---|---|
| Approximate Weight | 130 g |
| Supported Baud Rates | 9.6, 19.2, 93.75, 187.5, 500 and 1500 kBaud |
| Bus Protocol | PROFIBUS-DP |
| Digital Output Count | 16 |
| Output Grouping | 2 groups of 8 outputs |
| Rated Electronics Supply Voltage | 24 V DC at 4L+ and 5L+ |
| Reverse-Polarity Protection | Yes |
| Power-Failure Withstand Time | At least 20 ms |
| Rated Load Voltage | 24 V DC at 1L+, 2L+ and 3L+ |
| Aggregate Output Current, Horizontal Mounting | Maximum 4 A to 30 °C; 3 A to 40 °C; 2 A to 60 °C per byte |
| Aggregate Output Current, Other Mounting Positions | Maximum 2 A to 40 °C per byte |
| Galvanic Isolation | No between channels; yes between channels and PROFIBUS-DP |
| Insulation Test Voltage | 500 V DC |
| Electronics Supply Current | Maximum 180 mA from 4L+/5L+ |
| Typical Module Power Loss | 4.0 W |
| Output Current at Signal 1 | 0.5 A rated; permissible range 1 mA to 0.5 A |
| Residual Current at Signal 0 | Maximum 1 mA |
| Output Delay with Resistive Load | Maximum 50 µs from 1 to 0; maximum 200 µs from 0 to 1 |
| Load-Switching Limits and Protection | 41 Ω to 28 kΩ; lamp load maximum 5 W; 100 Hz resistive, 0.5 Hz inductive and 8 Hz lamp switching; electronic short-circuit response typically 0.7 A |
Frequently Asked Questions
Which terminal arrangement is required for 6ES7132-1BH11-0XB0?
Use the TB 16SC connection and preserve the installed Smart Connect wiring arrangement during replacement.
How are the channels grouped on 6ES7132-1BH11-0XB0?
The sixteen outputs are organized as two groups of eight, so each field circuit must remain assigned to the correct load group.
What type of field loads can 6ES7132-1BH11-0XB0 switch?
It is intended for 24 V DC loads such as solenoid valves, DC contactors and indicator lights within the stated current limits.
How should current derating be checked for 6ES7132-1BH11-0XB0?
Match the total output current per byte to the mounting position and ambient temperature; the permitted aggregate value decreases as temperature rises.
What do the status indicators on 6ES7132-1BH11-0XB0 help diagnose?
Green channel LEDs show output status, while the red bus-fault and group-fault LEDs and the green electronics-supply LED support commissioning checks.
Can two outputs of 6ES7132-1BH11-0XB0 be connected in parallel?
Parallel connection is permitted only for redundant control when both outputs belong to the same group; it is not permitted to increase output power.
What should be verified before replacing 6ES7132-1BH11-0XB0?
Confirm the TB 16SC connection, channel grouping, PROFIBUS address, load-voltage feeds, field wiring and the permitted current for the installed mounting position.
Compatibility & Ordering Notes
Compatibility Checklist
- Use the electronic block in the matching SIMATIC ET 200L-SC station and TB 16SC connection arrangement.
- Keep each actuator within the 0.5 A channel rating and observe the aggregate current limit for the mounting position and temperature.
- Preserve the PROFIBUS address, supply grouping and field-terminal assignments before exchanging the electronic block.
