Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7131 6bf01 0aa0 et 200sp di 8x24vdc ba-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7131-6BF01-0AA0 ET 200SP DI 8x24VDC BA

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200SP

6ES7131-6BF01-0AA0 ET 200SP DI 8x24VDC BA

Eight P-reading digital inputs with a protected sensor-supply arrangement, selectable input delay and module supply-voltage diagnostics.

At a Glance

Brand Siemens
Model 6ES7131-6BF01-0AA0
Product Type Basic digital input module
Core Function Acquisition of PNP field signals
Application Distributed sensor stations

PNP signal interface

Eight sinking inputs acquire 24 V DC PNP signals.

Sensor power

The encoder supply is short-circuit protected at module level.

A0 installation

Fits BaseUnits of type A0 and uses the CC01 identification code.

Product Overview

6ES7131-6BF01-0AA0 acquires eight 24 V DC digital signals from PNP sensors in an ET 200SP station. The Basic input module combines P-reading inputs with a sensor-supply arrangement protected against short circuits at module level.

Its input filtering offers eight selectable delay settings, while supply monitoring and a group-error indication support station troubleshooting. Three-wire and four-wire sensor connections require the corresponding AUX or potential-distribution arrangement around the A0 BaseUnit.

Ordering focus: Match the PNP input circuit and sensor-supply current demand, then choose the A0 BaseUnit arrangement for the field-wire count.
Key Functions

Supply and read PNP sensors

The module provides eight sensor-supply outputs with a 700 mA maximum total per module and reads the connected PNP input signals.

Select the input response

Delay settings range from 0.05 to 20 ms, with another 30 to 500 µs depending on cable length.

Diagnose module supply conditions

Parameterizable supply-voltage monitoring, group-error indication and PWR/DIAG LEDs support module-level checks.

Official Specifications
Input channel count 8, parameterizable
Supply voltage 24 V DC rated; permissible range 19.2–28.8 V DC
Input circuit Sinking, PNP, P-reading; IEC 61131 Types 1, 2 and 3
Input voltage thresholds Signal 0: −30 to +5 V; signal 1: +11 to +30 V
Typical signal-1 current 6.8 mA
Sensor-supply arrangement 8 outputs; minimum output voltage 19.2 V; module-level short-circuit protection
Maximum sensor-supply current 700 mA per channel and 700 mA total per module
Module consumption and loss 70 mA maximum supply current; 1.6 W typical loss with eight inputs supplied from the encoder supply
Input-delay settings 0.05, 0.1, 0.4, 0.8, 1.6, 3.2, 12.8 or 20 ms, plus 30–500 µs line-dependent delay
Maximum input-cable length 1,000 m shielded; 600 m unshielded
Two-wire sensor quiescent current 2 mA maximum
Input address allocation 1 byte
BaseUnit identification Type A0; CC01 color code; type A mechanical coding
Engineering support TIA Portal V14 or later; STEP 7 V5.5 SP3 or later; PROFINET GSDML V2.3
Diagnostic coverage Supply-voltage monitoring and group error; no wire-break, short-circuit or channel diagnostics
Electrical isolation Inputs isolated from backplane bus; no isolation between channels
Insulation test 707 V DC, type test
Operating temperature Horizontal: −30 to +60 °C; vertical: −30 to +50 °C; below 0 °C from FS03
Dimensions and weight 15 × 73 × 58 mm (W × H × D); approximately 28 g
Official source:Siemens product data sheet
Frequently Asked Questions

Can the sensor supply of 6ES7131-6BF01-0AA0 provide 700 mA to every channel at once?

The sensor supply is limited to 700 mA per module as well as 700 mA per channel.

Which input polarity does 6ES7131-6BF01-0AA0 need from a three-wire proximity sensor?

The sinking inputs require PNP, P-reading signals.

How low can an input-on voltage fall before it leaves the guaranteed range of 6ES7131-6BF01-0AA0?

The guaranteed signal-1 voltage range starts at +11 V and extends to +30 V.

What extra terminals are needed for four-wire sensors on 6ES7131-6BF01-0AA0?

Use a type A0 BaseUnit together with a potential distributor module.

Can 6ES7131-6BF01-0AA0 locate a shorted sensor cable through channel diagnostics?

The module does not provide individual channel, wire-break or short-circuit diagnostics.

Can I configure 6ES7131-6BF01-0AA0 with TIA Portal V13?

Integrated configuration begins with TIA Portal V14.

How much input address space does 6ES7131-6BF01-0AA0 occupy in the station?

The module occupies one byte of input address space.

Compatibility & Ordering Notes
Before ordering 6ES7131-6BF01-0AA0: Select the P-reading Basic version, A0 BaseUnit and CC01 labeling, then balance the combined sensor-supply load.

Compatibility Checklist for 6ES7131-6BF01-0AA0

  • Keep total sensor-supply current within 700 mA.
  • Use AUX terminals or a potential distributor for three-wire sensors.
  • Use a potential distributor with A0 for four-wire sensors.
  • Apply the below-zero temperature capability only from hardware FS03.
Hot Selling Models
700-390-1AE80
GRT1ID81
ADN-16-150-APA
X10.11P
3RF2320-1DA02
PNOZ3
efector100 IGC249 IGK34.5-BPKG/AM/US-104-DPS
12.24.31/K541
VQC1301N-51
LS72E;30001207A037839
140M-C2E-B16 140M-C-AFA11
27101
3RT1015-1BB41 3RH1911-1FA11
KQ2L12-G04A
Z1-16

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.